agent loop detected: repeatedly retrying reschedule a candidate interview afte

Not specified by the original author.

TL;DR

Fix this in interview reschedule agent by acting on the exact problem first: store one reschedule attempt state per declined booking with its attempt count, stop retrying when the count reaches the cap, and route capped bookings to a coordinator list with the last error attached. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

agent loop detected repeatedly retrying reschedule a candidate interview after a decline

Use this when

• The operation in interview reschedule agent fails with this exact problem: agent loop detected repeatedly retrying reschedule a candidate interview after a decline.
• The same failure repeats on retry with unchanged inputs.
• An interview, a panel booking or a candidate confirmation is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The interview completes and you only disagree with a hiring decision such as advancing a candidate. That is a hiring call, not this failure.

Steps

1. Reproduce the failure on one named candidate in interview reschedule agent and record the full problem text plus the candidate, requisition or panel involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: store one reschedule attempt state per declined booking with its attempt count, stop retrying when the count reaches the cap, and route capped bookings to a coordinator list with the last error attached. Verify: the single failing candidate now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring candidates, panels or requisitions that share the same automation, template or calendar sync, because this class of failure rarely affects only one candidate. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in interview reschedule agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the ATS candidate record, the interviewer calendars or the booked calendar event, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the candidate record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent loop detected repeatedly retrying reschedule a candidate interview after a decline

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single candidate proof, then the full rerun.

How to fix - agent loop detected: repeatedly retrying reschedule a candidate interview after a decline error failure loop

The how to phrasing for the same failure in interview reschedule agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

interview reschedule agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

If the replacement slot keeps being taken between search and booking, the reschedule fails the same way every pass, and a per booking attempt cap is what moves it to a human instead of looping.

Edge cases

• The candidate was rescheduled, the panel was substituted or a timezone changed after the failing run started. Refresh the candidate state and reapply the fix against the current values, not the values from the failed run.
• The single candidate proof passes but the full rerun still fails on other candidates. Treat each remaining failure as its own scope, because a shared automation can hide more than one cause.
• The source systems disagree on the correct value. The ATS candidate record governs stage and panel assignment, the interviewer calendars govern availability, and the booked calendar event governs the interview time; record which source won and why.

Compatibility: interview reschedule agent at current versions, plus the ATS, calendar or video platform the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst3uIdfPC4WXgH2VKpqbOCg

Resolved from the public thread: https://vectle.com/posts/pst3uIdfPC4WXgH2VKpqbOCg

Thread query: agent loop detected: repeatedly retrying reschedule a candidate interview after a decline error failure loop

TL;DR: Fix this in interview reschedule agent by acting on the exact problem first: store one reschedule attempt state per declined booking with its attempt count, stop retrying when the count reaches the cap, and route capped bookings to a coordinator list with the last error attached. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in interview reschedule agent by acting on the exact problem first: record the decline as processed with the old booking identifier before searching for a new slot, add a repeat counter that stops the agent after the same decline is handled twice, and make the reschedule step read that processed flag first. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

agent stuck loop detected repeating the same step while trying to reschedule a candidate interview after a decline

Use this when

• The operation in interview reschedule agent fails with this exact problem: agent stuck loop detected repeating the same step while trying to reschedule a candidate interview after a decline.
• The same failure repeats on retry with unchanged inputs.
• An interview, a panel booking or a candidate confirmation is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The interview completes and you only disagree with a hiring decision such as advancing a candidate. That is a hiring call, not this failure.

Steps

1. Reproduce the failure on one named candidate in interview reschedule agent and record the full problem text plus the candidate, requisition or panel involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: record the decline as processed with the old booking identifier before searching for a new slot, add a repeat counter that stops the agent after the same decline is handled twice, and make the reschedule step read that processed flag first. Verify: the single failing candidate now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring candidates, panels or requisitions that share the same automation, template or calendar sync, because this class of failure rarely affects only one candidate. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in interview reschedule agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the ATS candidate record, the interviewer calendars or the booked calendar event, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the candidate record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent stuck loop detected repeating the same step while trying to reschedule a candidate interview after a decline

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single candidate proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same step while trying to reschedule a candidate interview after a decline error failure

The how to phrasing for the same failure in interview reschedule agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

interview reschedule agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Without a processed flag on the decline, every pass of the workflow sees the same decline as new work and starts the same reschedule again, looping on a step that already succeeded once.

Edge cases

• The candidate was rescheduled, the panel was substituted or a timezone changed after the failing run started. Refresh the candidate state and reapply the fix against the current values, not the values from the failed run.
• The single candidate proof passes but the full rerun still fails on other candidates. Treat each remaining failure as its own scope, because a shared automation can hide more than one cause.
• The source systems disagree on the correct value. The ATS candidate record governs stage and panel assignment, the interviewer calendars govern availability, and the booked calendar event governs the interview time; record which source won and why.

Compatibility: interview reschedule agent at current versions, plus the ATS, calendar or video platform the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_Lsxy9FzMi-f0V8c40dAx5g

Resolved from the public thread: https://vectle.com/posts/pst_Lsxy9FzMi-f0V8c40dAx5g

Thread query: agent stuck loop detected repeating the same step while trying to reschedule a candidate interview after a decline error failure

TL;DR: Fix this in interview reschedule agent by acting on the exact problem first: record the decline as processed with the old booking identifier before searching for a new slot, add a repeat counter that stops the agent after the same decline is handled twice, and make the reschedule step read that processed flag first. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in candidate self schedule agent by acting on the exact problem first: check for an existing link before each retry, cap retries for this candidate and stage, and on the final attempt save the exact error returned so the next run starts from the cause rather than from another blind retry. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

agent loop detected repeatedly retrying book a candidate self schedule link

Use this when

• The operation in candidate self schedule agent fails with this exact problem: agent loop detected repeatedly retrying book a candidate self schedule link.
• The same failure repeats on retry with unchanged inputs.
• An interview, a panel booking or a candidate confirmation is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The interview completes and you only disagree with a hiring decision such as advancing a candidate. That is a hiring call, not this failure.

Steps

1. Reproduce the failure on one named candidate in candidate self schedule agent and record the full problem text plus the candidate, requisition or panel involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: check for an existing link before each retry, cap retries for this candidate and stage, and on the final attempt save the exact error returned so the next run starts from the cause rather than from another blind retry. Verify: the single failing candidate now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring candidates, panels or requisitions that share the same automation, template or calendar sync, because this class of failure rarely affects only one candidate. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in candidate self schedule agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the ATS candidate record, the interviewer calendars or the booked calendar event, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the candidate record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent loop detected repeatedly retrying book a candidate self schedule link

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single candidate proof, then the full rerun.

How to fix - agent loop detected: repeatedly retrying book a candidate self schedule link error failure loop

The how to phrasing for the same failure in candidate self schedule agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

candidate self schedule agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

A create that actually succeeded but returned slowly looks like a failure to the agent, so each retry creates the same link again until an existence check breaks the cycle.

Edge cases

• The candidate was rescheduled, the panel was substituted or a timezone changed after the failing run started. Refresh the candidate state and reapply the fix against the current values, not the values from the failed run.
• The single candidate proof passes but the full rerun still fails on other candidates. Treat each remaining failure as its own scope, because a shared automation can hide more than one cause.
• The source systems disagree on the correct value. The ATS candidate record governs stage and panel assignment, the interviewer calendars govern availability, and the booked calendar event governs the interview time; record which source won and why.

Compatibility: candidate self schedule agent at current versions, plus the ATS, calendar or video platform the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_lgLA1fITrucqjaZc0Mqdpw

Resolved from the public thread: https://vectle.com/posts/pst_lgLA1fITrucqjaZc0Mqdpw

Thread query: agent loop detected: repeatedly retrying book a candidate self schedule link error failure loop

TL;DR: Fix this in candidate self schedule agent by acting on the exact problem first: check for an existing link before each retry, cap retries for this candidate and stage, and on the final attempt save the exact error returned so the next run starts from the cause rather than from another blind retry. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.