agent hallucinating DSR fulfilment status error invented completion that ne

Not specified by the original author.

TL;DR

Fix this in agent output checking for DSR fulfilment by doing this first: verify every reported DSR fulfilment value against a read-back from the source system before it is used, drop any value with no source match, and record the source reference next to each kept value. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent invented DSR fulfilment status not in the source

Use this when

• The operation fails with this exact problem: agent invented DSR fulfilment status not in the source.
• The same failure repeats on retry with unchanged inputs.
• An audit, review, or request is blocked until this item completes.

Not for this skill when

• The message is a platform outage notice or a general sign-in failure. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in agent output checking for DSR fulfilment, and copy the full message plus the item, account, or request involved into the run notes. Verify: the problem is reproduced on demand with a named item, not only seen in an old log.
2. Apply the specific fix for this problem: verify every reported DSR fulfilment value against a read-back from the source system before it is used, drop any value with no source match, and record the source reference next to each kept value. Verify: the single test item now completes or shows the expected state on a direct read-back from the source.
3. Check the neighbouring items that share the same connection, mapping, owner, or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions, or statuses against the source system so a silent partial success is caught before sign-off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
6. Record the fix, the triggering input, and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied, and the evidence of success.

Why it happens

When a source read is slow or empty the agent fills the gap with plausible values, and without a read-back check those inventions flow into evidence and responses as if they were real.

Variant phrasings

agent hallucinating DSR fulfilment status error invented completion that never happened failure

The verbatim form searchers paste from the console or ticket. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix this failure in practice

The how-to phrasing for the same failure. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting the symptom-first form

The phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: OneTrust, Transcend, DataGrail, and Securiti class privacy platforms at current versions, plus the source systems the query names; no extra tooling beyond the platform console or API access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_46b2AKIN8y-7xH3s5BxbYQ

Resolved from the public thread: https://vectle.com/posts/pst_46b2AKIN8y-7xH3s5BxbYQ

Thread query: agent hallucinating DSR fulfilment status error invented completion that never happened failure

TL;DR: Fix this in agent output checking for DSR fulfilment by doing this first: verify every reported DSR fulfilment value against a read-back from the source system before it is used, drop any value with no source match, and record the source reference next to each kept value. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in agent output checking for DSR fulfilment by doing this first: verify every reported DSR fulfilment value against a read-back from the source system before it is used, drop any value with no source match, and record the source reference next to each kept value. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent invented DSR fulfilment values not in the source

Use this when

• The operation fails with this exact problem: agent invented DSR fulfilment values not in the source.
• The same failure repeats on retry with unchanged inputs.
• An audit, review, or request is blocked until this item completes.

Not for this skill when

• The message is a platform outage notice or a general sign-in failure. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in agent output checking for DSR fulfilment, and copy the full message plus the item, account, or request involved into the run notes. Verify: the problem is reproduced on demand with a named item, not only seen in an old log.
2. Apply the specific fix for this problem: verify every reported DSR fulfilment value against a read-back from the source system before it is used, drop any value with no source match, and record the source reference next to each kept value. Verify: the single test item now completes or shows the expected state on a direct read-back from the source.
3. Check the neighbouring items that share the same connection, mapping, owner, or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions, or statuses against the source system so a silent partial success is caught before sign-off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
6. Record the fix, the triggering input, and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied, and the evidence of success.

Why it happens

When a source read is slow or empty the agent fills the gap with plausible values, and without a read-back check those inventions flow into evidence and responses as if they were real.

Variant phrasings

agent hallucinating DSR fulfilment values error fabricated records that do not exist failure

The verbatim form searchers paste from the console or ticket. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix this failure in practice

The how-to phrasing for the same failure. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting the symptom-first form

The phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: OneTrust, Transcend, DataGrail, and Securiti class privacy platforms at current versions, plus the source systems the query names; no extra tooling beyond the platform console or API access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_RJ-iVq613SsPkXZFwFbzbg

Resolved from the public thread: https://vectle.com/posts/pst_RJ-iVq613SsPkXZFwFbzbg

Thread query: agent hallucinating DSR fulfilment values error fabricated records that do not exist failure

TL;DR: Fix this in agent output checking for DSR fulfilment by doing this first: verify every reported DSR fulfilment value against a read-back from the source system before it is used, drop any value with no source match, and record the source reference next to each kept value. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in agent output checking for DSR fulfilment by doing this first: verify every reported DSR fulfilment value against a read-back from the source system before it is used, drop any value with no source match, and record the source reference next to each kept value. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent invented DSR fulfilment fields not in the source

Use this when

• The operation fails with this exact problem: agent invented DSR fulfilment fields not in the source.
• The same failure repeats on retry with unchanged inputs.
• An audit, review, or request is blocked until this item completes.

Not for this skill when

• The message is a platform outage notice or a general sign-in failure. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in agent output checking for DSR fulfilment, and copy the full message plus the item, account, or request involved into the run notes. Verify: the problem is reproduced on demand with a named item, not only seen in an old log.
2. Apply the specific fix for this problem: verify every reported DSR fulfilment value against a read-back from the source system before it is used, drop any value with no source match, and record the source reference next to each kept value. Verify: the single test item now completes or shows the expected state on a direct read-back from the source.
3. Check the neighbouring items that share the same connection, mapping, owner, or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions, or statuses against the source system so a silent partial success is caught before sign-off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
6. Record the fix, the triggering input, and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied, and the evidence of success.

Why it happens

When a source read is slow or empty the agent fills the gap with plausible values, and without a read-back check those inventions flow into evidence and responses as if they were real.

Variant phrasings

agent hallucinating DSR fulfilment fields error invented data not in source failure

The verbatim form searchers paste from the console or ticket. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix this failure in practice

The how-to phrasing for the same failure. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting the symptom-first form

The phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: OneTrust, Transcend, DataGrail, and Securiti class privacy platforms at current versions, plus the source systems the query names; no extra tooling beyond the platform console or API access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_e4eGuAQvBo3eWB6CY0pewA

Resolved from the public thread: https://vectle.com/posts/pst_e4eGuAQvBo3eWB6CY0pewA

Thread query: agent hallucinating DSR fulfilment fields error invented data not in source failure

TL;DR: Fix this in agent output checking for DSR fulfilment by doing this first: verify every reported DSR fulfilment value against a read-back from the source system before it is used, drop any value with no source match, and record the source reference next to each kept value. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.