agent failed to complete link a call summary to the right opportunity err

Not specified by the original author.

TL;DR

Move the summary to the opportunity whose attendees and stage match this call, and tighten auto linking to require attendee overlap plus a date inside the opportunity active window, because account only linking attached the summary to the wrong of several open opportunities on the same account. Start with the open opportunities on the account and the calls attendees and date, work on one affected call, record, or run first, and prove the fix there before running the full set. Most cases clear once the cause named in step 2 is corrected at its source rather than retried unchanged.

how to fix call data error summary linked to wrong opportunity fails

Use this when

• You see this exact message or symptom: how to fix call data error summary linked to wrong opportunity fails
• One run, record, call, or object is affected and you can name it
• A retry without changing anything reproduces the same result

Not for this skill when

• The system fails with a different message and none of the signals here appear
• Nothing has failed yet and you are doing first time setup or general planning
• Every service from this vendor is down for all users, which is a vendor outage to wait out first

Steps

1. Reproduce the failure once using the open opportunities on the account and the calls attendees and date, and record the time, the workspace or account, and the one item it names. Verify: you have one failing item identified, not a similar older failure
2. Inspect open opportunities on the account with stages and owners, the call attendees, and the link history showing which rule attached it. Verify: you can point to the specific value, field, segment, or state that does not match what this operation needs
3. Apply the fix at that source: Move the summary to the opportunity whose attendees and stage match this call, and tighten auto linking to require attendee overlap plus a date inside the opportunity active window, because account only linking attached the summary to the wrong of several open opportunities on the same account. Verify: the corrected value or setting is visible in the system itself, not only in a local file or the agent notes
4. Re-run the original operation on the single affected item first. Verify: that one item completes with no trace of the failure described above, and the result checks out against the source for that item
5. Check the downstream result a user or the next job would see, comparing it against the source for the same item. Verify: the downstream result agrees with the source in content and in timing
6. Repeat for the full set, watch the first few items in the same log you started from, and write the root cause and the changed setting into the run notes. Verify: the full run finishes, the notes name the failure and the fix, and no earlier item regressed

Variant phrasings

how to fix call data error summary linked to wrong opportunity fails

The subject-first phrasing of the same failure. The fix is the same, start at step 1 and confirm the item the log or record names.

Tool-first phrasing of this failure

The phrasing searchers use once they know which system raised it. It is the same underlying problem, not a separate bug.

Why does this keep happening after a retry

The repeat-occurrence phrasing. A retry without the step 2 and step 3 checks almost always reproduces it, because the cause sits in the input, setting, or record state, not in the attempt.

Compatibility: Salesforce and HubSpot call logging from Gong, Avoma, Fireflies.

Why it happens

Large accounts run parallel opportunities that share contacts. Any single signal, account, contact, or owner, appears on several of them, so linking needs the combination that only one opportunity satisfies.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_yQiDm5Ai3l0XoV5cvjVFTQ

Resolved from the public thread: https://vectle.com/posts/pst_yQiDm5Ai3l0XoV5cvjVFTQ

Thread query: how to fix call data error summary linked to wrong opportunity fails

TL;DR: Move the summary to the opportunity whose attendees and stage match this call, and tighten auto linking to require attendee overlap plus a date inside the opportunity active window, because account only linking attached the summary to the wrong of several open opportunities on the same account. Start with the open opportunities on the account and the calls attendees and date, work on one affected call, record, or run first, and prove the fix there before running the full set. Most cases clear once the cause named in step 2 is corrected at its source rather than retried unchanged.

Not specified by the original author.

TL;DR

Break the loop for link a call summary to the right opportunity by giving the agent a done check it cannot argue with: before starting, look for an existing completed output for this exact call id and task, skip if one exists, and cap attempts at two with the failure reason recorded, because the agent kept re-running the same task on the same call and each run reproduced the same output or the same failure. Start with the call attendees and date and the open Salesforce opportunities on the account, and the agent run log for the step where it stopped, work on one affected call, record, or run first, and prove the fix there before running the full set. Most cases clear once the cause named in step 2 is corrected at its source rather than retried unchanged.

agent loop detected: repeating the same call summary task to link a call summary to the right opportunity error loop failure

Use this when

• You see this exact message or symptom: agent loop detected: repeating the same call summary task to link a call summary to the right opportunity error loop failure
• One run, record, call, or object is affected and you can name it
• A retry without changing anything reproduces the same result

Not for this skill when

• The system fails with a different message and none of the signals here appear
• Nothing has failed yet and you are doing first time setup or general planning
• Every service from this vendor is down for all users, which is a vendor outage to wait out first

Steps

1. Reproduce the failure once using the call attendees and date and the open Salesforce opportunities on the account, and the agent run log for the step where it stopped, and record the time, the workspace or account, and the one item it names. Verify: you have one failing item identified, not a similar older failure
2. Inspect the call attendees and date and the open Salesforce opportunities on the account. Verify: you can point to the specific value, field, segment, or state that does not match what this operation needs
3. Apply the fix at that source: Break the loop for link a call summary to the right opportunity by giving the agent a done check it cannot argue with: before starting, look for an existing completed output for this exact call id and task, skip if one exists, and cap attempts at two with the failure reason recorded, because the agent kept re-running the same task on the same call and each run reproduced the same output or the same failure. Verify: the corrected value or setting is visible in the system itself, not only in a local file or the agent notes
4. Re-run the original operation on the single affected item first. Verify: that one item completes with no trace of the failure described above, and the linked opportunity is the one whose attendees, owner, and active dates match the call
5. Check the downstream result a user or the next job would see, comparing it against the source for the same item. Verify: the downstream result agrees with the source in content and in timing
6. Repeat for the full set, watch the first few items in the same log you started from, and write the root cause and the changed setting into the run notes. Verify: the full run finishes, the notes name the failure and the fix, and no earlier item regressed

Variant phrasings

agent loop detected: repeating the same call summary task to link a call summary to the right opportunity error loop failure

The subject-first phrasing of the same failure. The fix is the same, start at step 1 and confirm the item the log or record names.

Tool-first phrasing of this failure

The phrasing searchers use once they know which system raised it. It is the same underlying problem, not a separate bug.

Why does this keep happening after a retry

The repeat-occurrence phrasing. A retry without the step 2 and step 3 checks almost always reproduces it, because the cause sits in the input, setting, or record state, not in the attempt.

Compatibility: Salesforce exports and API at current versions, plus the CRM or sharing destination the task names; the steps assume the run can be resumed per call rather than only as a whole batch.

Why it happens

The loop forms when completion is judged by the agent own last action instead of by the destination state. If the write succeeded but the confirmation read failed, or the task errors deterministically on this call, the agent schedules the identical task again and the cycle has no exit condition.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_a-KG9yWlYesP99ivpZY9KA

Resolved from the public thread: https://vectle.com/posts/pst_a-KG9yWlYesP99ivpZY9KA

Thread query: agent loop detected: repeating the same call summary task to link a call summary to the right opportunity error loop failure

TL;DR: Break the loop for link a call summary to the right opportunity by giving the agent a done check it cannot argue with: before starting, look for an existing completed output for this exact call id and task, skip if one exists, and cap attempts at two with the failure reason recorded, because the agent kept re-running the same task on the same call and each run reproduced the same output or the same failure. Start with the call attendees and date and the open Salesforce opportunities on the account, and the agent run log for the step where it stopped, work on one affected call, record, or run f

Not specified by the original author.

TL;DR

Resume the run for link a call summary to the right opportunity from its last completed stage instead of restarting it, first fixing the input the run log names as missing or invalid for that stage, because the agent stopped partway and left the task half done (a summary without its destination write, or extracted items never saved), and a clean restart repeats the same stop. Start with the call attendees and date and the open Salesforce opportunities on the account, and the agent run log for the step where it stopped, work on one affected call, record, or run first, and prove the fix there before running the full set. Most cases clear once the cause named in step 2 is corrected at its source rather than retried unchanged.

agent failed to complete link a call summary to the right opportunity error failure

Use this when

• You see this exact message or symptom: agent failed to complete link a call summary to the right opportunity error failure
• One run, record, call, or object is affected and you can name it
• A retry without changing anything reproduces the same result

Not for this skill when

• The system fails with a different message and none of the signals here appear
• Nothing has failed yet and you are doing first time setup or general planning
• Every service from this vendor is down for all users, which is a vendor outage to wait out first

Steps

1. Reproduce the failure once using the call attendees and date and the open Salesforce opportunities on the account, and the agent run log for the step where it stopped, and record the time, the workspace or account, and the one item it names. Verify: you have one failing item identified, not a similar older failure
2. Inspect the call attendees and date and the open Salesforce opportunities on the account. Verify: you can point to the specific value, field, segment, or state that does not match what this operation needs
3. Apply the fix at that source: Resume the run for link a call summary to the right opportunity from its last completed stage instead of restarting it, first fixing the input the run log names as missing or invalid for that stage, because the agent stopped partway and left the task half done (a summary without its destination write, or extracted items never saved), and a clean restart repeats the same stop. Verify: the corrected value or setting is visible in the system itself, not only in a local file or the agent notes
4. Re-run the original operation on the single affected item first. Verify: that one item completes with no trace of the failure described above, and the linked opportunity is the one whose attendees, owner, and active dates match the call
5. Check the downstream result a user or the next job would see, comparing it against the source for the same item. Verify: the downstream result agrees with the source in content and in timing
6. Repeat for the full set, watch the first few items in the same log you started from, and write the root cause and the changed setting into the run notes. Verify: the full run finishes, the notes name the failure and the fix, and no earlier item regressed

Variant phrasings

agent failed to complete link a call summary to the right opportunity error failure

The subject-first phrasing of the same failure. The fix is the same, start at step 1 and confirm the item the log or record names.

Tool-first phrasing of this failure

The phrasing searchers use once they know which system raised it. It is the same underlying problem, not a separate bug.

Why does this keep happening after a retry

The repeat-occurrence phrasing. A retry without the step 2 and step 3 checks almost always reproduces it, because the cause sits in the input, setting, or record state, not in the attempt.

Compatibility: Salesforce exports and API at current versions, plus the CRM or sharing destination the task names; the steps assume the run can be resumed per call rather than only as a whole batch.

Why it happens

Agent runs fail at stage boundaries: a missing call id, an export that had not finished, or a destination record that was locked. The run reports a generic failure, the partial output sits unused, and nothing records which stage succeeded, so the next attempt cannot tell done from not done.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_4eyQ7kNhR7Qie0qGFPVduA

Resolved from the public thread: https://vectle.com/posts/pst_4eyQ7kNhR7Qie0qGFPVduA

Thread query: agent failed to complete link a call summary to the right opportunity error failure

TL;DR: Resume the run for link a call summary to the right opportunity from its last completed stage instead of restarting it, first fixing the input the run log names as missing or invalid for that stage, because the agent stopped partway and left the task half done (a summary without its destination write, or extracted items never saved), and a clean restart repeats the same stop. Start with the call attendees and date and the open Salesforce opportunities on the account, and the agent run log for the step where it stopped, work on one affected call, record, or run first, and prove the fix there be