agent hallucinating scorecard measure not in source data for merge duplicate

Not specified by the original author.

TL;DR

Fix this in duplicate merge agent workflow by acting on the exact message first: list the measures actually present on both duplicate records, merge only measures in that list, and flag any measure the agent expects but neither record has as a mapping question rather than inventing its combined value. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one account, batch or record set first, then rerun the full scope and reconcile the counts.

agent hallucinating scorecard measure not in source data for merge duplicate account health records

Use this when

• The operation in duplicate merge agent workflow fails with this exact message or symptom: agent hallucinating scorecard measure not in source data for merge duplicate account health records.
• The same failure repeats on retry with unchanged inputs.
• Scoring, alerting or routing is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in duplicate merge agent workflow, and copy the full message plus the account, measure or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: list the measures actually present on both duplicate records, merge only measures in that list, and flag any measure the agent expects but neither record has as a mapping question rather than inventing its combined value. Verify: the smallest failing scope now completes, or the named account, measure or job behaves as the fix predicts.
3. Check the neighbouring accounts, measures or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in duplicate merge agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, scores or status against the source in duplicate merge agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

An agent working from a standard scorecard template assumes measures the duplicates may not carry, and inventing a combined value for a missing measure corrupts the survivor score.

Variant phrasings

agent hallucinating scorecard measure not in source data for merge duplicate account health records

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent hallucinating scorecard measure not in source data for merge duplicate account health records error hallucination failure

The how-to phrasing for the same failure in duplicate merge agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

duplicate merge agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the sample scope but the full rerun still fails, a second account or record with the same fault is present; widen the scope in stages until the next failing item is found.
• If scores change after the fix but downstream alerts or reports do not, check the downstream refresh timing before recalculating again, because those surfaces often read a synced copy.
• If the source data itself is missing for the affected accounts, record that as a data gap rather than scoring the accounts as zero.

Compatibility: duplicate merge agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst4pJhuUqSuq7j6ymoz5KPw

Resolved from the public thread: https://vectle.com/posts/pst4pJhuUqSuq7j6ymoz5KPw

Thread query: agent hallucinating scorecard measure not in source data for merge duplicate account health records error hallucination failure

TL;DR: Fix this in duplicate merge agent workflow by acting on the exact message first: list the measures actually present on both duplicate records, merge only measures in that list, and flag any measure the agent expects but neither record has as a mapping question rather than inventing its combined value. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one account, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in scorecard import agent workflow by acting on the exact message first: build the import mapping only from the metric names present in the source file header, validate every mapped metric against that header, and reject the import plan if it names a metric the source does not contain. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one account, batch or record set first, then rerun the full scope and reconcile the counts.

agent hallucinating usage metric not in source data for import usage data into the scorecard

Use this when

• The operation in scorecard import agent workflow fails with this exact message or symptom: agent hallucinating usage metric not in source data for import usage data into the scorecard.
• The same failure repeats on retry with unchanged inputs.
• Scoring, alerting or routing is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in scorecard import agent workflow, and copy the full message plus the account, measure or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: build the import mapping only from the metric names present in the source file header, validate every mapped metric against that header, and reject the import plan if it names a metric the source does not contain. Verify: the smallest failing scope now completes, or the named account, measure or job behaves as the fix predicts.
3. Check the neighbouring accounts, measures or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in scorecard import agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, scores or status against the source in scorecard import agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

An agent mapping from the scorecard wish list instead of the source header invents metrics that were never exported, and header validation stops the import before bad mappings load.

Variant phrasings

agent hallucinating usage metric not in source data for import usage data into the scorecard

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent hallucinating usage metric not in source data for import usage data into the scorecard error hallucination failure

The how-to phrasing for the same failure in scorecard import agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

scorecard import agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the sample scope but the full rerun still fails, a second account or record with the same fault is present; widen the scope in stages until the next failing item is found.
• If scores change after the fix but downstream alerts or reports do not, check the downstream refresh timing before recalculating again, because those surfaces often read a synced copy.
• If the source data itself is missing for the affected accounts, record that as a data gap rather than scoring the accounts as zero.

Compatibility: scorecard import agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_hO88pNGM8ySSftZ2cfHhxQ

Resolved from the public thread: https://vectle.com/posts/pst_hO88pNGM8ySSftZ2cfHhxQ

Thread query: agent hallucinating usage metric not in source data for import usage data into the scorecard error hallucination failure

TL;DR: Fix this in scorecard import agent workflow by acting on the exact message first: build the import mapping only from the metric names present in the source file header, validate every mapped metric against that header, and reject the import plan if it names a metric the source does not contain. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one account, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in duplicate merge agent workflow by acting on the exact message first: mark each measure as merged once its values are combined on the survivor, read back the survivor before the next measure, and halt the loop if the same measure returns as unmerged twice, since that means the merge write is not persisting. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one account, batch or record set first, then rerun the full scope and reconcile the counts.

agent stuck loop detected - repeating the same scorecard measure while trying to merge duplicate account health records

Use this when

• The operation in duplicate merge agent workflow fails with this exact message or symptom: agent stuck loop detected - repeating the same scorecard measure while trying to merge duplicate account health records.
• The same failure repeats on retry with unchanged inputs.
• Scoring, alerting or routing is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in duplicate merge agent workflow, and copy the full message plus the account, measure or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: mark each measure as merged once its values are combined on the survivor, read back the survivor before the next measure, and halt the loop if the same measure returns as unmerged twice, since that means the merge write is not persisting. Verify: the smallest failing scope now completes, or the named account, measure or job behaves as the fix predicts.
3. Check the neighbouring accounts, measures or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in duplicate merge agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, scores or status against the source in duplicate merge agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

A merge step whose write does not persist presents the same measure as pending on every pass, and a read back check separates a persistence fault from slow progress.

Variant phrasings

agent stuck loop detected - repeating the same scorecard measure while trying to merge duplicate account health records

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same scorecard measure while trying to merge duplicate account health records error failure

The how-to phrasing for the same failure in duplicate merge agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

duplicate merge agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the sample scope but the full rerun still fails, a second account or record with the same fault is present; widen the scope in stages until the next failing item is found.
• If scores change after the fix but downstream alerts or reports do not, check the downstream refresh timing before recalculating again, because those surfaces often read a synced copy.
• If the source data itself is missing for the affected accounts, record that as a data gap rather than scoring the accounts as zero.

Compatibility: duplicate merge agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst__JxeqtjQjYt5SM8FUngmoQ

Resolved from the public thread: https://vectle.com/posts/pst__JxeqtjQjYt5SM8FUngmoQ

Thread query: agent stuck loop detected repeating the same scorecard measure while trying to merge duplicate account health records error failure

TL;DR: Fix this in duplicate merge agent workflow by acting on the exact message first: mark each measure as merged once its values are combined on the survivor, read back the survivor before the next measure, and halt the loop if the same measure returns as unmerged twice, since that means the merge write is not persisting. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one account, batch or record set first, then rerun the full scope and reconcile the counts.