agent stuck on SOC alert enrichment approval step error timeout failure loop

Not specified by the original author.

TL;DR

Fix this in the agent workflow for SOC alert enrichment by acting on the exact message first: detect the waiting-on-approval state explicitly, notify the approver with the item link, and escalate after the wait limit instead of polling the step forever. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent stuck on SOC alert enrichment approval step error timeout failure loop

Use this when

• The operation in the agent workflow for SOC alert enrichment fails with this exact message: agent stuck on SOC alert enrichment approval step error timeout failure loop.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the agent workflow for SOC alert enrichment, and copy the full message plus the alert, incident or enrichment record involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: detect the waiting-on-approval state explicitly, notify the approver with the item link, and escalate after the wait limit instead of polling the step forever. Verify: a test item in the approval step notifies the approver and escalates on schedule.
3. Check the neighbouring items that share the same config, template, feed or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions or alerts against the source in the agent workflow for SOC alert enrichment so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the agent workflow for SOC alert enrichment on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

the agent had no representation of a human wait state, so it polled an approval step that only a person can advance.

Variant phrasings

agent stuck on SOC alert enrichment approval step error timeout failure loop

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent stuck on SOC alert enrichment approval step error timeout failure loop

The how-to phrasing for the same failure in the agent workflow for SOC alert enrichment. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the agent workflow for SOC alert enrichment troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the agent workflow for SOC alert enrichment at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_73VB5mNK-9gciIo6aHY6XQ

Resolved from the public thread: https://vectle.com/posts/pst_73VB5mNK-9gciIo6aHY6XQ

Thread query: agent stuck on SOC alert enrichment approval step error timeout failure loop

TL;DR: Fix this in the agent workflow for SOC alert enrichment by acting on the exact message first: detect the waiting-on-approval state explicitly, notify the approver with the item link, and escalate after the wait limit instead of polling the step forever. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the SOAR playbook by acting on the exact message first: raise the timeout on the hung enrichment action to cover its real upstream latency, convert that step to run asynchronously with a completion callback, and cancel the stuck run before retrying. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

action timeout

Use this when

• The operation in the SOAR playbook fails with this exact message: action timeout.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the SOAR playbook, and copy the full message plus the alert, incident or enrichment record involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: raise the timeout on the hung enrichment action to cover its real upstream latency, convert that step to run asynchronously with a completion callback, and cancel the stuck run before retrying. Verify: the playbook completes the enrichment step on a test alert within the new limit.
3. Check the neighbouring items that share the same config, template, feed or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions or alerts against the source in the SOAR playbook so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the SOAR playbook on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

the downstream action regularly runs longer than the playbook step limit, so the step was killed mid-call and the run hung waiting on it.

Variant phrasings

action timeout

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: SOAR playbook failed error "action timeout" enrichment step hung failure

The how-to phrasing for the same failure in the SOAR playbook. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the SOAR playbook troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the SOAR playbook at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_DKvszGAm7sM8BiBiUWUTiw

Resolved from the public thread: https://vectle.com/posts/pst_DKvszGAm7sM8BiBiUWUTiw

Thread query: SOAR playbook failed error "action timeout" enrichment step hung failure

TL;DR: Fix this in the SOAR playbook by acting on the exact message first: raise the timeout on the hung enrichment action to cover its real upstream latency, convert that step to run asynchronously with a completion callback, and cancel the stuck run before retrying. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the SOC agent by acting on the exact message first: add an approval ageing check that escalates a containment approval waiting past its threshold to a backup approver, assign the currently aged critical alert to that backup now, and record the escalation time on the incident. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent stuck on containment approval step critical alert aged past SLA unassigned

Use this when

• The operation in the SOC agent fails with this exact message: agent stuck on containment approval step critical alert aged past SLA unassigned.
• The same failure repeats on retry with unchanged inputs.
• An alert, incident or enrichment step is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the SOC agent, and copy the full message plus the alert, incident or enrichment record involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: add an approval ageing check that escalates a containment approval waiting past its threshold to a backup approver, assign the currently aged critical alert to that backup now, and record the escalation time on the incident. Verify: the single failing item now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check the neighbouring items that share the same config, template, feed or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions or alerts against the source in the SOC agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the SOC agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Approval steps with a single approver and no ageing rule wait indefinitely when that person is away, and a critical alert ages past its service target in silence.

Variant phrasings

agent stuck on containment approval step critical alert aged past SLA unassigned

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix - agent stuck on containment approval step critical alert aged past SLA unassigned

The how-to phrasing for the same failure in the SOC agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the SOC agent troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the SOC agent at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_DGLD41PPjKMLlvy7FpvQKQ

Resolved from the public thread: https://vectle.com/posts/pst_DGLD41PPjKMLlvy7FpvQKQ

Thread query: agent stuck on containment approval step critical alert aged past SLA unassigned

TL;DR: Fix this in the SOC agent by acting on the exact message first: add an approval ageing check that escalates a containment approval waiting past its threshold to a backup approver, assign the currently aged critical alert to that backup now, and record the escalation time on the incident. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.