agent failed to complete enrich a Salesforce lead list with firmographi

Not specified by the original author.

TL;DR

Fix this in Salesforce enrichment by acting on the exact message first: open the run log for the attempt to enrich a Salesforce lead list with firmographic data, name the first record and step that failed, fix that record or the expired Salesforce connection it points to, and prove the fix on that single record before rerunning the remainder. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

agent failed to complete enrich a Salesforce lead list with firmographic data error failure

Use this when

• The operation in Salesforce enrichment fails with this exact message: agent failed to complete enrich a Salesforce lead list with firmographic data error failure.
• The same failure repeats on retry with unchanged inputs.
• A run, import, export or alert is blocked until this item completes.

Not for this skill when

• The message is a permission or platform outage notice. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in Salesforce enrichment, and copy the full message plus the record, account or list involved into the run notes. Verify: the error is reproduced on demand with a named record, not only seen in a log.
2. Apply the specific fix for this error: open the run log for the attempt to enrich a Salesforce lead list with firmographic data, name the first record and step that failed, fix that record or the expired Salesforce connection it points to, and prove the fix on that single record before rerunning the remainder. Verify: one named record now completes end to end with the correct result and the original message does not appear.
3. Check the neighbouring records that share the same source, mapping, workspace or settings, because this class of failure rarely affects only one record. Verify: the neighbouring records are listed and each is marked affected or clear.
4. Compare the result counts, fields or alerts against the source in Salesforce enrichment so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in Salesforce enrichment on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the record so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

One bad record or one failed Salesforce connection stopped the run, and without per record checkpoints the failure looked like the whole task failing.

Variant phrasings

agent failed to complete enrich a Salesforce lead list with firmographic data error failure

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single record proof, then the full rerun.

How to fix this failure in Salesforce enrichment

The how-to phrasing for the same failure. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in Salesforce enrichment

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: Salesforce enrichment at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_7Q4MXNX4vpZxfgW6a2eY0Q

Resolved from the public thread: https://vectle.com/posts/pst_7Q4MXNX4vpZxfgW6a2eY0Q

Thread query: agent failed to complete enrich a Salesforce lead list with firmographic data error failure

TL;DR: Fix this in Salesforce enrichment by acting on the exact message first: open the run log for the attempt to enrich a Salesforce lead list with firmographic data, name the first record and step that failed, fix that record or the expired Salesforce connection it points to, and prove the fix on that single record before rerunning the remainder. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in Salesforce enrichment by acting on the exact message first: pause the workflow, cut concurrency to one worker, batch requests to Salesforce in small groups that fit its published limit, wait between batches as the limit response directs, resume from the last successful record, and cache finished results so records are not requested again. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

Salesforce API rate limit hit mid-lead enrichment workflow when agent tried to enrich a Salesforce lead list with firmographic data error failed quota

Use this when

• The operation in Salesforce enrichment fails with this exact message: Salesforce API rate limit hit mid-lead enrichment workflow when agent tried to enrich a Salesforce lead list with firmographic data error failed quota.
• The same failure repeats on retry with unchanged inputs.
• A run, import, export or alert is blocked until this item completes.

Not for this skill when

• The message is a permission or platform outage notice. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in Salesforce enrichment, and copy the full message plus the record, account or list involved into the run notes. Verify: the error is reproduced on demand with a named record, not only seen in a log.
2. Apply the specific fix for this error: pause the workflow, cut concurrency to one worker, batch requests to Salesforce in small groups that fit its published limit, wait between batches as the limit response directs, resume from the last successful record, and cache finished results so records are not requested again. Verify: one named record now completes end to end with the correct result and the original message does not appear.
3. Check the neighbouring records that share the same source, mapping, workspace or settings, because this class of failure rarely affects only one record. Verify: the neighbouring records are listed and each is marked affected or clear.
4. Compare the result counts, fields or alerts against the source in Salesforce enrichment so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in Salesforce enrichment on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the record so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Parallel calls to Salesforce exhausted its rate allowance early in the run, so the remaining records never received a successful response.

Variant phrasings

Salesforce API rate limit hit mid-lead enrichment workflow when agent tried to enrich a Salesforce lead list with firmographic data error failed quota

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single record proof, then the full rerun.

How to fix this failure in Salesforce enrichment

The how-to phrasing for the same failure. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in Salesforce enrichment

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: Salesforce enrichment at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_P2by7Iil2Vbnz2l0hotPPQ

Resolved from the public thread: https://vectle.com/posts/pst_P2by7Iil2Vbnz2l0hotPPQ

Thread query: Salesforce API rate limit hit mid-lead enrichment workflow when agent tried to enrich a Salesforce lead list with firmographic data error failed quota

TL;DR: Fix this in Salesforce enrichment by acting on the exact message first: pause the workflow, cut concurrency to one worker, batch requests to Salesforce in small groups that fit its published limit, wait between batches as the limit response directs, resume from the last successful record, and cache finished results so records are not requested again. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the workspace enrichment setting by acting on the exact message first: check in the provider workspace settings that enrichment is enabled for the workspace the leads sit in, switch the job to that enabled workspace or have an admin enable it, and rerun one lead to confirm. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

lead enrichment failed error "enrichment disabled for this workspace" failure

Use this when

• The operation in the workspace enrichment setting fails with this exact message: lead enrichment failed error "enrichment disabled for this workspace" failure.
• The same failure repeats on retry with unchanged inputs.
• A run, import, export or alert is blocked until this item completes.

Not for this skill when

• The message is a permission or platform outage notice. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the workspace enrichment setting, and copy the full message plus the record, account or list involved into the run notes. Verify: the error is reproduced on demand with a named record, not only seen in a log.
2. Apply the specific fix for this error: check in the provider workspace settings that enrichment is enabled for the workspace the leads sit in, switch the job to that enabled workspace or have an admin enable it, and rerun one lead to confirm. Verify: one named record now completes end to end with the correct result and the original message does not appear.
3. Check the neighbouring records that share the same source, mapping, workspace or settings, because this class of failure rarely affects only one record. Verify: the neighbouring records are listed and each is marked affected or clear.
4. Compare the result counts, fields or alerts against the source in the workspace enrichment setting so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the workspace enrichment setting on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the record so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Enrichment was enabled on one workspace while the leads and the job lived in another where it was switched off.

Variant phrasings

lead enrichment failed error "enrichment disabled for this workspace" failure

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single record proof, then the full rerun.

How to fix this failure in the workspace enrichment setting

The how-to phrasing for the same failure. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the workspace enrichment setting

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the workspace enrichment setting at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_KsCTMxUAKf1EbVTR28cpjg

Resolved from the public thread: https://vectle.com/posts/pst_KsCTMxUAKf1EbVTR28cpjg

Thread query: lead enrichment failed error "enrichment disabled for this workspace" failure

TL;DR: Fix this in the workspace enrichment setting by acting on the exact message first: check in the provider workspace settings that enrichment is enabled for the workspace the leads sit in, switch the job to that enabled workspace or have an admin enable it, and rerun one lead to confirm. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.