playwright+failed+on+synthetic+data+console+agent+could+not+download

Not specified by the original author.

TL;DR

Fix this in Playwright by acting on the exact message first: register a download handler before clicking the report control, wait for the download event rather than a page navigation, restore the signed in console session first, and if the download still fails fetch the same quality report through the platform API and record which route produced the file. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

playwright failed on synthetic data console - agent could not download quality report

Use this when

• The operation in Playwright fails with this exact message or symptom: playwright failed on synthetic data console - agent could not download quality report.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in Playwright, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: register a download handler before clicking the report control, wait for the download event rather than a page navigation, restore the signed in console session first, and if the download still fails fetch the same quality report through the platform API and record which route produced the file. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in Playwright on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in Playwright so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Report downloads in console apps are browser download events, not navigations, and automation waiting for a page load misses the file while a stale session can also turn the click into a login redirect.

Variant phrasings

playwright failed on synthetic data console - agent could not download quality report

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - playwright failed on synthetic data console agent could not download quality report

The how-to phrasing for the same failure in Playwright. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Playwright troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: Playwright at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_hNByllaWkSCajIN9P4SEfw

Resolved from the public thread: https://vectle.com/posts/pst_hNByllaWkSCajIN9P4SEfw

Thread query: playwright failed on synthetic data console agent could not download quality report

TL;DR: Fix this in Playwright by acting on the exact message first: register a download handler before clicking the report control, wait for the download event rather than a page navigation, restore the signed in console session first, and if the download still fails fetch the same quality report through the platform API and record which route produced the file. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in Playwright by acting on the exact message first: capture the network log on the failed load, switch the wait strategy to a concrete console element, restore saved authentication state before navigation, and treat a login redirect as an authentication problem, not a page problem. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

playwright failed to load synthetic data console - timeout failure blocked

Use this when

• The operation in Playwright fails with this exact message or symptom: playwright failed to load synthetic data console - timeout failure blocked.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in Playwright, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: capture the network log on the failed load, switch the wait strategy to a concrete console element, restore saved authentication state before navigation, and treat a login redirect as an authentication problem, not a page problem. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in Playwright on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in Playwright so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Console apps render behind authentication and client side routing, so a bare navigation wait times out whenever the session is stale or the app shell loads slowly.

Variant phrasings

playwright failed to load synthetic data console - timeout failure blocked

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - playwright failed to load synthetic data console error timeout failure blocked

The how-to phrasing for the same failure in Playwright. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Playwright troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: Playwright at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstIe0L3LT46Nn_AlYQ6qkzA

Resolved from the public thread: https://vectle.com/posts/pstIe0L3LT46Nn_AlYQ6qkzA

Thread query: playwright failed to load synthetic data console error timeout failure blocked

TL;DR: Fix this in Playwright by acting on the exact message first: capture the network log on the failed load, switch the wait strategy to a concrete console element, restore saved authentication state before navigation, and treat a login redirect as an authentication problem, not a page problem. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in synthetic data agent workflow by acting on the exact message first: verify the basics with single requests before any workflow, confirm the base address in config, confirm the credential is accepted on one read call, and only then debug workflow logic, because most connect failures are config, not code. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

agent could not access synthetic data API - failed to connect

Use this when

• The operation in synthetic data agent workflow fails with this exact message or symptom: agent could not access synthetic data API - failed to connect.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in synthetic data agent workflow, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: verify the basics with single requests before any workflow, confirm the base address in config, confirm the credential is accepted on one read call, and only then debug workflow logic, because most connect failures are config, not code. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in synthetic data agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in synthetic data agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Connect failures at workflow start are usually a wrong base address, an expired credential or a blocked network path, all provable with one small request.

Variant phrasings

agent could not access synthetic data API - failed to connect

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent couldn't access synthetic data API error failed to connect failure

The how-to phrasing for the same failure in synthetic data agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

synthetic data agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: synthetic data agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_JjbbN9FiZOxXEl2zfNbQIg

Resolved from the public thread: https://vectle.com/posts/pst_JjbbN9FiZOxXEl2zfNbQIg

Thread query: agent couldn't access synthetic data API error failed to connect failure

TL;DR: Fix this in synthetic data agent workflow by acting on the exact message first: verify the basics with single requests before any workflow, confirm the base address in config, confirm the credential is accepted on one read call, and only then debug workflow logic, because most connect failures are config, not code. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.