agent hallucinating figures not in source data for allocate cloud costs in

Not specified by the original author.

TL;DR

Fix this in cloud allocation agent by acting on the exact problem first: allocate only from the billing export line items, require each team total to be the sum of named line items, show untagged spend as unallocated rather than estimating an owner, and fail the run if team totals do not sum to the export total. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one account, period or department first, then rerun the full scope and reconcile the results.

agent hallucinating figures not in source data for allocate cloud costs in the variance dashboard error hallucination failure

Use this when

• The operation in cloud allocation agent fails with this exact problem: agent hallucinating figures not in source data for allocate cloud costs in the variance dashboard error hallucination failure.
• The same failure repeats on retry with unchanged inputs.
• A variance report, forecast, commentary or board pack step is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a business judgement such as the budget itself or a materiality call. That is an FP and A decision, not this failure.

Steps

1. Reproduce the failure on one named account, period or department in cloud allocation agent and record the full problem text plus the account, period or report involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: allocate only from the billing export line items, require each team total to be the sum of named line items, show untagged spend as unallocated rather than estimating an owner, and fail the run if team totals do not sum to the export total. Verify: the single failing scope now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring accounts, periods or departments that share the same mapping, template or load, because this class of failure rarely affects only one scope. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in cloud allocation agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the GL actuals, the approved budget or the planning system record, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the report or close file so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent hallucinating figures not in source data for allocate cloud costs in the variance dashboard error hallucination failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent hallucinating figures not in source data for allocate cloud costs in the variance dashboard error hallucination failure

The how to phrasing for the same failure in cloud allocation agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

cloud allocation agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Estimating an owner for untagged spend feels helpful and is still fabrication, and a sum to export check proves every allocated amount came from a real line item.

Edge cases

• The period was closed, the budget was reloaded or the org mapping changed after the failing run started. Refresh the scope state and reapply the fix against the current values, not the values from the failed run.
• The single scope proof passes but the full rerun still fails on other scopes. Treat each remaining failure as its own scope, because a shared load or mapping can hide more than one cause.
• The source systems disagree on the correct value. The GL governs actuals, the approved budget version governs plan figures, and the planning system governs forecast; record which source won and why.

Compatibility: cloud allocation agent at current versions, plus Power BI, Excel, Tableau, Looker, NetSuite and Adaptive Planning where the query names them; sources of truth are GL actuals and the approved budget, and no extra tooling is needed beyond access to those source records.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_9djNDGA081WPj5poBHdIHA

Resolved from the public thread: https://vectle.com/posts/pst_9djNDGA081WPj5poBHdIHA

Thread query: agent hallucinating figures not in source data for allocate cloud costs in the variance dashboard error hallucination failure

TL;DR: Fix this in cloud allocation agent by acting on the exact problem first: allocate only from the billing export line items, require each team total to be the sum of named line items, show untagged spend as unallocated rather than estimating an owner, and fail the run if team totals do not sum to the export total. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one account, period or department first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in close checklist agent by acting on the exact problem first: require every figure the agent cites on the checklist to come from a retrieved ledger, subledger or bank record, add a check comparing each cited figure against its source record, and remove any figure with no matching source before the checklist is signed. Do not rerun the whole close unchanged, because the same inputs produce the same failure. Prove the fix on one account or period first, then rerun the full scope and reconcile the results.

agent hallucinating figures not in source data for execute the month end close checklist error hallucination failure

Use this when

• The operation in close checklist agent fails with this exact problem: agent hallucinating figures not in source data for execute the month end close checklist error hallucination failure.
• The same failure repeats on retry with unchanged inputs.
• A close task, reconciliation, journal or reporting step is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with an accounting judgement such as an estimate or a materiality call. That is a controller decision, not this failure.

Steps

1. Reproduce the failure on one named account or period in close checklist agent and record the full problem text plus the account, period or journal involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: require every figure the agent cites on the checklist to come from a retrieved ledger, subledger or bank record, add a check comparing each cited figure against its source record, and remove any figure with no matching source before the checklist is signed. Verify: the single failing account or period now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring accounts, entities or periods that share the same checklist, schedule or sync, because this class of failure rarely affects only one account. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in close checklist agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the signed general ledger record, the subledger record or the bank record, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the close log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent hallucinating figures not in source data for execute the month end close checklist error hallucination failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single account proof, then the full rerun.

How to fix - agent hallucinating figures not in source data for execute the month end close checklist error hallucination failure

The how to phrasing for the same failure in close checklist agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

close checklist agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

When a source lookup returns empty, an agent can fill the gap with a plausible figure, and only a source comparison separates retrieved close figures from invented ones.

Edge cases

• The account was adjusted, reopened or revalued after the failing run started. Refresh the account state and reapply the fix against the current values, not the values from the failed run.
• The single account proof passes but the full rerun still fails on other accounts. Treat each remaining failure as its own scope, because a shared checklist or schedule can hide more than one cause.
• The source systems disagree on the correct value. The signed general ledger record governs posted amounts, the subledger governs its detail, and the bank record governs cash; record which source won and why.

Compatibility: close checklist agent at current versions, plus the general ledger, subledger or close tool the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_zla9yuTfvXCyctvMvPCc7w

Resolved from the public thread: https://vectle.com/posts/pst_zla9yuTfvXCyctvMvPCc7w

Thread query: agent hallucinating figures not in source data for execute the month end close checklist error hallucination failure

TL;DR: Fix this in close checklist agent by acting on the exact problem first: require every figure the agent cites on the checklist to come from a retrieved ledger, subledger or bank record, add a check comparing each cited figure against its source record, and remove any figure with no matching source before the checklist is signed. Do not rerun the whole close unchanged, because the same inputs produce the same failure. Prove the fix on one account or period first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in variance report agent by acting on the exact problem first: require every figure in the report to come from a retrieved GL or budget record, add a check comparing each reported account total against those records, and delete or correct any figure with no matching source record before the report is shared. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one account, period or department first, then rerun the full scope and reconcile the results.

agent hallucinating figures not in source data for build the budget vs actual variance report error hallucination failure

Use this when

• The operation in variance report agent fails with this exact problem: agent hallucinating figures not in source data for build the budget vs actual variance report error hallucination failure.
• The same failure repeats on retry with unchanged inputs.
• A variance report, forecast, commentary or board pack step is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a business judgement such as the budget itself or a materiality call. That is an FP and A decision, not this failure.

Steps

1. Reproduce the failure on one named account, period or department in variance report agent and record the full problem text plus the account, period or report involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: require every figure in the report to come from a retrieved GL or budget record, add a check comparing each reported account total against those records, and delete or correct any figure with no matching source record before the report is shared. Verify: the single failing scope now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring accounts, periods or departments that share the same mapping, template or load, because this class of failure rarely affects only one scope. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in variance report agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the GL actuals, the approved budget or the planning system record, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the report or close file so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent hallucinating figures not in source data for build the budget vs actual variance report error hallucination failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent hallucinating figures not in source data for build the budget vs actual variance report error hallucination failure

The how to phrasing for the same failure in variance report agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

variance report agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

When an extract returns empty for an account, an agent can fill the gap with a plausible figure, and only a source comparison separates retrieved actuals from invented ones.

Edge cases

• The period was closed, the budget was reloaded or the org mapping changed after the failing run started. Refresh the scope state and reapply the fix against the current values, not the values from the failed run.
• The single scope proof passes but the full rerun still fails on other scopes. Treat each remaining failure as its own scope, because a shared load or mapping can hide more than one cause.
• The source systems disagree on the correct value. The GL governs actuals, the approved budget version governs plan figures, and the planning system governs forecast; record which source won and why.

Compatibility: variance report agent at current versions, plus Power BI, Excel, Tableau, Looker, NetSuite and Adaptive Planning where the query names them; sources of truth are GL actuals and the approved budget, and no extra tooling is needed beyond access to those source records.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_9mLQ-tP6GTULYmKnUPaOWg

Resolved from the public thread: https://vectle.com/posts/pst_9mLQ-tP6GTULYmKnUPaOWg

Thread query: agent hallucinating figures not in source data for build the budget vs actual variance report error hallucination failure

TL;DR: Fix this in variance report agent by acting on the exact problem first: require every figure in the report to come from a retrieved GL or budget record, add a check comparing each reported account total against those records, and delete or correct any figure with no matching source record before the report is shared. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one account, period or department first, then rerun the full scope and reconcile the results.