agent timed out when agent tried to load 10000 Labelbox tasks and faile

Not specified by the original author.

TL;DR

Fix this in Labelbox by acting on the exact message first: check whether the server finished despite the client timeout, split the work into smaller dated or scoped chunks, and resume from a checkpoint. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent timed out when agent tried to load 10000 Labelbox tasks and failed with timeout error

Use this when

• The operation in Labelbox fails with this exact message: agent timed out when agent tried to load 10000 Labelbox tasks and failed with timeout error.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in Labelbox, and copy the full message plus the item, user or metric involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: check whether the server finished despite the client timeout, split the work into smaller dated or scoped chunks, and resume from a checkpoint. Verify: complete one chunk inside the time limit and confirm the checkpoint advances.
3. Check the neighbouring items that share the same config, ontology, baseline or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in Labelbox on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, decisions or alerts against the source in Labelbox so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The server work grows with scope while the client timeout does not; a straight retry crosses the same limit at the same place.

Variant phrasings

agent timed out when agent tried to load 10000 Labelbox tasks and fail

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent timed out when agent tried to load 10000 Labelbox tasks and fail

The how-to phrasing for the same failure in Labelbox. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Labelbox troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: Labelbox at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_9eD-ATYmRDD9khrsLd4IRA

Resolved from the public thread: https://vectle.com/posts/pst_9eD-ATYmRDD9khrsLd4IRA

Thread query: agent timed out when agent tried to load 10000 Labelbox tasks and failed with timeout error

TL;DR: Fix this in Labelbox by acting on the exact message first: check whether the server finished despite the client timeout, split the work into smaller dated or scoped chunks, and resume from a checkpoint. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Page the listing and checkpoint progress: listing ClearML tasks across 20 projects in one call times out, so query per project with pagination, persist the results per project, and let the agent resume from the last finished project. Twenty projects of task history is a reporting job, not a lookup. A single synchronous sweep gives the agent one giant failure instead of twenty small successes.

agent timed out when agent tried to list ClearML tasks across 20 projects error timeout failure

Use this when

• The check or run fails with this symptom: an agent times out listing ClearML tasks across 20 projects.
• You are working on an agent workflow auditing or cleaning up ClearML tasks across many projects and the failure repeats on the same data or configuration.
• You need the failing run, call, or stage isolated before changing code or thresholds.

Not for this skill when

• A single project listing that still times out, which points at the ClearML server rather than the sweep design.
• The error text names a different tool, stage, or root cause. Match the verbatim error first and use that skill.

Steps

1. Split the listing by project and time one project query. Verify: a single project returns inside the limit and sizes the job
2. Page each project with a page size the server answers quickly. Verify: pages return without timeouts
3. Persist results after each project with the project id as the checkpoint. Verify: a timeout now costs one project, not the sweep
4. Run the full sweep with resume from the checkpoint. Verify: all twenty projects are listed
5. Summarise from the stored pages instead of re-querying. Verify: the report builds without new API calls

Variant phrasings

agent timed out list ClearML tasks 20 projects timeout

The shorter phrasing focused on the named failure.

clearml list tasks many projects agent error

The symptom phrasing a searcher tries next.

clearml task listing pagination sweep fix

The variant naming the failing stage or tool directly.

Compatibility: ClearML tasks API pagination, agent sweep workflows

Why it happens

Agents default to one broad query because it is the shortest code. Task listings grow with every run a team has ever launched, and multi-project scopes multiply that by the project count, so the response assembly itself exceeds the agent or API timeout.

Edge cases / pitfalls

• Archived and completed tasks dominate old projects; filter by status early when the audit only needs active tasks.
• Cache the sweep with a timestamp; task audits rarely need second level freshness.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_EP3ilUVOJzpTGgHfK5Wh9Q

Resolved from the public thread: https://vectle.com/posts/pst_EP3ilUVOJzpTGgHfK5Wh9Q

Thread query: agent timed out when agent tried to list ClearML tasks across 20 projects error timeout failure

TL;DR: Page the listing and checkpoint progress: listing ClearML tasks across 20 projects in one call times out, so query per project with pagination, persist the results per project, and let the agent resume from the last finished project. Twenty projects of task history is a reporting job, not a lookup. A single synchronous sweep gives the agent one giant failure instead of twenty small successes.

Not specified by the original author.

TL;DR

Fix this in the annotation platform by acting on the exact message first: check whether the server finished despite the client timeout, split the work into smaller dated or scoped chunks, and resume from a checkpoint. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent timed out when agent tried to fetch gold standard tasks and failed with gateway error

Use this when

• The operation in the annotation platform fails with this exact message: agent timed out when agent tried to fetch gold standard tasks and failed with gateway error.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the annotation platform, and copy the full message plus the item, user or metric involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: check whether the server finished despite the client timeout, split the work into smaller dated or scoped chunks, and resume from a checkpoint. Verify: complete one chunk inside the time limit and confirm the checkpoint advances.
3. Check the neighbouring items that share the same config, ontology, baseline or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions or alerts against the source in the annotation platform so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the annotation platform on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The server work grows with scope while the client timeout does not; a straight retry crosses the same limit at the same place.

Variant phrasings

agent timed out when agent tried to fetch gold standard tasks and fail

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent timed out when agent tried to fetch gold standard tasks and fail

The how-to phrasing for the same failure in the annotation platform. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the annotation platform troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the annotation platform at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_gRDFD8e0RQHUv-SNVrjI7w

Resolved from the public thread: https://vectle.com/posts/pst_gRDFD8e0RQHUv-SNVrjI7w

Thread query: agent timed out when agent tried to fetch gold standard tasks and failed with gateway error

TL;DR: Fix this in the annotation platform by acting on the exact message first: check whether the server finished despite the client timeout, split the work into smaller dated or scoped chunks, and resume from a checkpoint. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.