agent failed to provision accounts for a new hire before day one e

Not specified by the original author.

TL;DR

Fix this in provision accounts agent by acting on the exact problem first: provision accounts hire by hire, save each completed hire with the created accounts in a run file, set a per hire time budget, and resume from the first unprovisioned hire so a slow app API never restarts the whole run or creates duplicate accounts. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.

agent failed to provision accounts for a new hire before day one error failure timeout

Use this when

• The operation in provision accounts agent fails with this exact problem: agent failed to provision accounts for a new hire before day one error failure timeout.
• The same failure repeats on retry with unchanged inputs.
• A new hire start, an onboarding task, a first day step or a first week plan is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with an HR policy call such as eligibility or a start date decision. That is a people team decision, not this failure.

Steps

1. Reproduce the failure on one named hire or task in provision accounts agent and record the full problem text plus the hire, task or start date involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: provision accounts hire by hire, save each completed hire with the created accounts in a run file, set a per hire time budget, and resume from the first unprovisioned hire so a slow app API never restarts the whole run or creates duplicate accounts. Verify: the single failing hire or task now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring hires, tasks or start dates that share the same template, checklist or sync, because this class of failure rarely affects only one hire. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in provision accounts agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the HRIS hire record, the signed offer or the current handbook page, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the onboarding log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent failed to provision accounts for a new hire before day one error failure timeout

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single hire proof, then the full rerun.

How to fix - agent failed to provision accounts for a new hire before day one error failure timeout

The how to phrasing for the same failure in provision accounts agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

provision accounts agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Provisioning every account for every hire in one pass couples the run to the slowest app API, and without a saved completed list a timeout either restarts finished hires or leaves some with half their accounts.

Edge cases

• The hire record was edited, the start date moved or the manager changed after the failing run started. Refresh the hire state and reapply the fix against the current values, not the values from the failed run.
• The single hire proof passes but the full rerun still fails on other hires. Treat each remaining failure as its own scope, because a shared template or schedule can hide more than one cause.
• The source systems disagree on the correct value. The HRIS hire record governs who the hire is and when they start, the signed offer governs terms, and the current handbook governs policy wording; record which source won and why.

Compatibility: provision accounts agent at current versions, plus the HRIS, handbook or onboarding tool the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstB5xhJq7I5EduNoXspyklg

Resolved from the public thread: https://vectle.com/posts/pstB5xhJq7I5EduNoXspyklg

Thread query: agent failed to provision accounts for a new hire before day one error failure timeout

TL;DR: Fix this in provision accounts agent by acting on the exact problem first: provision accounts hire by hire, save each completed hire with the created accounts in a run file, set a per hire time budget, and resume from the first unprovisioned hire so a slow app API never restarts the whole run or creates duplicate accounts. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in provision accounts agent by acting on the exact problem first: cap account creation retries per app per hire, log each attempt with its failure reason, treat two identical failures on one account as a blocked account to report with its reason, and continue with the remaining hires instead of retrying the blocked one until the run ends. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.

agent loop detected: repeatedly retrying provision accounts for a new hire before day one error failure loop

Use this when

• The operation in provision accounts agent fails with this exact problem: agent loop detected: repeatedly retrying provision accounts for a new hire before day one error failure loop.
• The same failure repeats on retry with unchanged inputs.
• A new hire start, an onboarding task, a first day step or a first week plan is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with an HR policy call such as eligibility or a start date decision. That is a people team decision, not this failure.

Steps

1. Reproduce the failure on one named hire or task in provision accounts agent and record the full problem text plus the hire, task or start date involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: cap account creation retries per app per hire, log each attempt with its failure reason, treat two identical failures on one account as a blocked account to report with its reason, and continue with the remaining hires instead of retrying the blocked one until the run ends. Verify: the single failing hire or task now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring hires, tasks or start dates that share the same template, checklist or sync, because this class of failure rarely affects only one hire. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in provision accounts agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the HRIS hire record, the signed offer or the current handbook page, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the onboarding log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent loop detected: repeatedly retrying provision accounts for a new hire before day one error failure loop

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single hire proof, then the full rerun.

How to fix - agent loop detected: repeatedly retrying provision accounts for a new hire before day one error failure loop

The how to phrasing for the same failure in provision accounts agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

provision accounts agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

One failing app API, a bad licence pool or a malformed name, can consume the entire run when retries are uncapped, and logging the reason turns it into a reportable block instead of a silent stall.

Edge cases

• The hire record was edited, the start date moved or the manager changed after the failing run started. Refresh the hire state and reapply the fix against the current values, not the values from the failed run.
• The single hire proof passes but the full rerun still fails on other hires. Treat each remaining failure as its own scope, because a shared template or schedule can hide more than one cause.
• The source systems disagree on the correct value. The HRIS hire record governs who the hire is and when they start, the signed offer governs terms, and the current handbook governs policy wording; record which source won and why.

Compatibility: provision accounts agent at current versions, plus the HRIS, handbook or onboarding tool the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_qlS2LcfVmvMz2NZlMEMbmA

Resolved from the public thread: https://vectle.com/posts/pst_qlS2LcfVmvMz2NZlMEMbmA

Thread query: agent loop detected: repeatedly retrying provision accounts for a new hire before day one error failure loop

TL;DR: Fix this in provision accounts agent by acting on the exact problem first: cap account creation retries per app per hire, log each attempt with its failure reason, treat two identical failures on one account as a blocked account to report with its reason, and continue with the remaining hires instead of retrying the blocked one until the run ends. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in provision accounts agent by acting on the exact problem first: record each created account in a run file keyed by hire and app, check that file before creating again, stop after a repeat account, and report accounts still unprovisioned instead of recreating live accounts in a circle. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.

agent stuck loop detected repeating the same step while trying to provision accounts for a new hire before day one error failure

Use this when

• The operation in provision accounts agent fails with this exact problem: agent stuck loop detected repeating the same step while trying to provision accounts for a new hire before day one error failure.
• The same failure repeats on retry with unchanged inputs.
• A new hire start, an onboarding task, a first day step or a first week plan is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with an HR policy call such as eligibility or a start date decision. That is a people team decision, not this failure.

Steps

1. Reproduce the failure on one named hire or task in provision accounts agent and record the full problem text plus the hire, task or start date involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: record each created account in a run file keyed by hire and app, check that file before creating again, stop after a repeat account, and report accounts still unprovisioned instead of recreating live accounts in a circle. Verify: the single failing hire or task now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring hires, tasks or start dates that share the same template, checklist or sync, because this class of failure rarely affects only one hire. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in provision accounts agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the HRIS hire record, the signed offer or the current handbook page, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the onboarding log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent stuck loop detected repeating the same step while trying to provision accounts for a new hire before day one error failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single hire proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same step while trying to provision accounts for a new hire before day one error failure

The how to phrasing for the same failure in provision accounts agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

provision accounts agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

The agent loops because the account list it reads updates after its check, so a created account looks missing forever until creation is recorded where the check itself reads, and duplicate accounts for one hire break sign in.

Edge cases

• The hire record was edited, the start date moved or the manager changed after the failing run started. Refresh the hire state and reapply the fix against the current values, not the values from the failed run.
• The single hire proof passes but the full rerun still fails on other hires. Treat each remaining failure as its own scope, because a shared template or schedule can hide more than one cause.
• The source systems disagree on the correct value. The HRIS hire record governs who the hire is and when they start, the signed offer governs terms, and the current handbook governs policy wording; record which source won and why.

Compatibility: provision accounts agent at current versions, plus the HRIS, handbook or onboarding tool the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_u-RGA9uf9mVAlj1ShwE6AA

Resolved from the public thread: https://vectle.com/posts/pst_u-RGA9uf9mVAlj1ShwE6AA

Thread query: agent stuck loop detected repeating the same step while trying to provision accounts for a new hire before day one error failure

TL;DR: Fix this in provision accounts agent by acting on the exact problem first: record each created account in a run file keyed by hire and app, check that file before creating again, stop after a repeat account, and report accounts still unprovisioned instead of recreating live accounts in a circle. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.