context overflow when agent tried to audit watched words with full

Not specified by the original author.

TL;DR

Fix this in watched words audit agent by acting on the exact problem first: audit the watched words against blocked and flagged posts only, in monthly slices, keeping a running table of matched words and counts, and load the full post history only for a word that the slices show is causing real blocks. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

context overflow when agent tried to audit watched words with full post history

Use this when

• The operation in watched words audit agent fails with this exact message or symptom: context overflow when agent tried to audit watched words with full post history.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in watched words audit agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: audit the watched words against blocked and flagged posts only, in monthly slices, keeping a running table of matched words and counts, and load the full post history only for a word that the slices show is causing real blocks. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in watched words audit agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in watched words audit agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

Full post history for a whole community is far larger than one run can hold, and almost all of it is irrelevant to which words are blocking legitimate posts.

Variant phrasings

context overflow when agent tried to audit watched words with full post history

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - context overflow when agent tried to audit watched words with full post history error context limit failure

The how to phrasing for the same failure in watched words audit agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

watched words audit agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: watched words audit agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_BJMYk0krO9NimsU0X6oH1A

Resolved from the public thread: https://vectle.com/posts/pst_BJMYk0krO9NimsU0X6oH1A

Thread query: context overflow when agent tried to audit watched words with full post history error context limit failure

TL;DR: Fix this in watched words audit agent by acting on the exact problem first: audit the watched words against blocked and flagged posts only, in monthly slices, keeping a running table of matched words and counts, and load the full post history only for a word that the slices show is causing real blocks. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in watched words audit agent by acting on the exact problem first: pause the audit at the limit, record the last post checked, resume from that post when the limit window resets, and lower the request rate for the remaining categories, because restarting the audit repeats the same calls and hits the same limit at the same place. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

API rate limit hit mid-workflow when agent tried to audit watched words blocking legitimate posts

Use this when

• The operation in watched words audit agent fails with this exact message or symptom: API rate limit hit mid-workflow when agent tried to audit watched words blocking legitimate posts.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in watched words audit agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: pause the audit at the limit, record the last post checked, resume from that post when the limit window resets, and lower the request rate for the remaining categories, because restarting the audit repeats the same calls and hits the same limit at the same place. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in watched words audit agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in watched words audit agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

Auditing word matches post by post generates a request per post, and a community sized audit exhausts the allowance long before it reaches the later categories.

Variant phrasings

API rate limit hit mid-workflow when agent tried to audit watched words blocking legitimate posts

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - API rate limit hit mid-workflow when agent tried to audit watched words blocking legitimate posts error failed quota

The how to phrasing for the same failure in watched words audit agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

watched words audit agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: watched words audit agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/psteP0XzilmHdp0iKwwRHkvA

Resolved from the public thread: https://vectle.com/posts/psteP0XzilmHdp0iKwwRHkvA

Thread query: API rate limit hit mid-workflow when agent tried to audit watched words blocking legitimate posts error failed quota

TL;DR: Fix this in watched words audit agent by acting on the exact problem first: pause the audit at the limit, record the last post checked, resume from that post when the limit window resets, and lower the request rate for the remaining categories, because restarting the audit repeats the same calls and hits the same limit at the same place. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in Search check agent by acting on the exact symptom first: check queries against the search log extract for those queries only, load the top results per query as titles and snippets, and pull a full article only when its snippet is ambiguous. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Context overflow checking search results with full account history

Use this when

• Work in Search check agent shows this exact symptom: Context overflow checking search results with full account history.
• The same symptom repeats after a retry with unchanged inputs.
• Readers or support agents are blocked until this item is corrected.

Not for this skill when

• The help center platform itself is down or returning outage notices. Resolve that first, then return here if this symptom remains.
• The content is correct and you only want a style or tone rewrite. That is an editorial pass, not this fix.

Steps

1. Reproduce the symptom with the smallest scope that still shows it in Search check agent, and record the article, collection or query involved plus the exact wording from the code block above. Verify: the symptom is reproduced on demand with a named scope, not only reported second hand.
2. Apply the specific fix for this symptom: check queries against the search log extract for those queries only, load the top results per query as titles and snippets, and pull a full article only when its snippet is ambiguous. Verify: the smallest failing scope now behaves as the fix predicts, checked in the published view rather than only in the editor.
3. Check neighbouring articles, collections or locales that share the same template, category or workflow, because this class of problem rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Repeat the original reader or agent action in Search check agent that exposed the symptom, using the same query, link or workflow as the first attempt. Verify: the action completes and the original symptom does not appear.
5. Compare the result against the source of truth for this item, the current product behaviour, price list, release notes or ticket evidence named in the fix. Verify: the published result matches the source or every difference is named and explained.
6. Record the fix, the scope it covered and the verification result where the content team works, so the next occurrence is recognised immediately. Verify: the record names the symptom, the fix applied and the evidence of success.

Variant phrasings

Context overflow checking search results with full account history

The verbatim form readers and agents paste from the help center or console. Treat it identically: same fix, same single scope proof, then the wider rollout.

How to fix - context overflow when agent tried to check help center search results for an error query with full account history error context limit failure

The how to phrasing for the same problem in Search check agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the final check.

Search check agent troubleshooting for this symptom

The symptom first phrasing used when the full message is hidden. Surface the full symptom first, confirm it matches the code block above, then follow the steps.

Why it happens

Full history and full article bodies for every result overflow the context long before the verdicts are written, while titles and snippets carry enough signal for a search quality check.

Edge cases

• The symptom appears in one locale, collection or audience view only. Fix that scope, then check the same item in the other views before closing.
• A cached or indexed copy keeps showing the old state after the fix. Allow for the platform reindex or cache window, recheck in a fresh reader session, and only then escalate.
• Two items have near identical titles. Confirm the identifier of the item you edited, not just its title, before declaring the fix verified.

Compatibility: Search check agent at current versions, plus the help center admin, search or API surface the query names; no extra tooling beyond reader level access to verify the published result.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstA3P5TqkMiAaMusGt4vq7A

Resolved from the public thread: https://vectle.com/posts/pstA3P5TqkMiAaMusGt4vq7A

Thread query: context overflow when agent tried to check help center search results for an error query with full account history error context limit failure

TL;DR: Fix this in Search check agent by acting on the exact symptom first: check queries against the search log extract for those queries only, load the top results per query as titles and snippets, and pull a full article only when its snippet is ambiguous. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.