synthetic data error foreign key constraint violated generated rows refe

Not specified by the original author.

TL;DR

Fix this in synthetic data generator by acting on the exact message first: generate parent tables first, build the child foreign keys by sampling only from the keys of the generated parent rows, and load parents before children so every referenced key already exists at insert time. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

foreign key constraint violated - generated rows reference missing parent

Use this when

• The operation in synthetic data generator fails with this exact message or symptom: foreign key constraint violated - generated rows reference missing parent.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in synthetic data generator, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: generate parent tables first, build the child foreign keys by sampling only from the keys of the generated parent rows, and load parents before children so every referenced key already exists at insert time. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in synthetic data generator on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in synthetic data generator so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Independently generated child rows invent key values that were never generated in the parent table, so the database correctly rejects them when the foreign key constraint is checked.

Variant phrasings

foreign key constraint violated - generated rows reference missing parent

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - synthetic data error foreign key constraint violated generated rows reference missing parent

The how-to phrasing for the same failure in synthetic data generator. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

synthetic data generator troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: synthetic data generator at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_BLmDo-BmoQPbx5yTJOJlfg

Resolved from the public thread: https://vectle.com/posts/pst_BLmDo-BmoQPbx5yTJOJlfg

Thread query: synthetic data error foreign key constraint violated generated rows reference missing parent

TL;DR: Fix this in synthetic data generator by acting on the exact message first: generate parent tables first, build the child foreign keys by sampling only from the keys of the generated parent rows, and load parents before children so every referenced key already exists at insert time. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in synthetic data generator by acting on the exact message first: filter child rows to keys that exist in the generated parent output, regenerate or drop the orphans the check names, and add the same join check inside the pipeline so orphans are caught before the validation suite runs. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

referential integrity check failed - orphan rows

Use this when

• The operation in synthetic data generator fails with this exact message or symptom: referential integrity check failed - orphan rows.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in synthetic data generator, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: filter child rows to keys that exist in the generated parent output, regenerate or drop the orphans the check names, and add the same join check inside the pipeline so orphans are caught before the validation suite runs. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in synthetic data generator on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in synthetic data generator so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Child rows generated or filtered separately from parents end up pointing at keys the parent output no longer contains, which the integrity check reports as orphans.

Variant phrasings

referential integrity check failed - orphan rows

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - how to fix synthetic data fails referential integrity check error orphan rows

The how-to phrasing for the same failure in synthetic data generator. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

synthetic data generator troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: synthetic data generator at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_To4XVaieVuupDPstoj79Og

Resolved from the public thread: https://vectle.com/posts/pst_To4XVaieVuupDPstoj79Og

Thread query: how to fix synthetic data fails referential integrity check error orphan rows

TL;DR: Fix this in synthetic data generator by acting on the exact message first: filter child rows to keys that exist in the generated parent output, regenerate or drop the orphans the check names, and add the same join check inside the pipeline so orphans are caught before the validation suite runs. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in synthetic data agent workflow by acting on the exact message first: parse the relational schema table by table with a schema aware reader, extract primary and foreign keys as a separate explicit list before any generation planning, validate that every foreign key in that list points at a table and column in the parsed set, and hand the agent the key list as structured data rather than prose. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

agent broke parsing multi table relational schema - foreign keys dropped

Use this when

• The operation in synthetic data agent workflow fails with this exact message or symptom: agent broke parsing multi table relational schema - foreign keys dropped.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in synthetic data agent workflow, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: parse the relational schema table by table with a schema aware reader, extract primary and foreign keys as a separate explicit list before any generation planning, validate that every foreign key in that list points at a table and column in the parsed set, and hand the agent the key list as structured data rather than prose. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in synthetic data agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in synthetic data agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Foreign keys live in constraints and relationship sections that a flat table by table parse skips, so an agent working from that parse plans generation as if the tables were independent and drops the relationships.

Variant phrasings

agent broke parsing multi table relational schema - foreign keys dropped

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - synthetic agent broke parsing multi table relational schema foreign keys dropped

The how-to phrasing for the same failure in synthetic data agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

synthetic data agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: synthetic data agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_Uw7NlsRxeTuPdCUiO4M82Q

Resolved from the public thread: https://vectle.com/posts/pst_Uw7NlsRxeTuPdCUiO4M82Q

Thread query: synthetic agent broke parsing multi table relational schema foreign keys dropped

TL;DR: Fix this in synthetic data agent workflow by acting on the exact message first: parse the relational schema table by table with a schema aware reader, extract primary and foreign keys as a separate explicit list before any generation planning, validate that every foreign key in that list points at a table and column in the parsed set, and hand the agent the key list as structured data rather than prose. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts