when agent tried to compare detectors side by side agent failed error mi

Not specified by the original author.

TL;DR

Fix this in the detector comparison by acting on the exact message first: align both detectors to the same start, end, and step before comparing, rerun the comparison extract with those bounds, and report the bounds alongside the result. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

when agent tried to compare detectors side by side agent failed error mismatched time ranges

Use this when

• The operation in the detector comparison fails with this exact message: when agent tried to compare detectors side by side agent failed error mismatched time ranges.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the detector comparison, and copy the full message plus the item, user or metric involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: align both detectors to the same start, end, and step before comparing, rerun the comparison extract with those bounds, and report the bounds alongside the result. Verify: both detectors score the identical window and differences reflect the models, not the ranges.
3. Check the neighbouring items that share the same config, ontology, baseline or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in the detector comparison on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, decisions or alerts against the source in the detector comparison so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Detectors compared over different windows disagree because they saw different data; the mismatch looks like a model difference.

Variant phrasings

when agent tried to compare detectors side by side agent failed error mismatched time ranges

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: when agent tried to compare detectors side by side agent failed error mismatched time ranges

The how-to phrasing for the same failure in the detector comparison. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the detector comparison troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the detector comparison at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_BeHgX4ekR8wY1X8CcPl9XA

Resolved from the public thread: https://vectle.com/posts/pst_BeHgX4ekR8wY1X8CcPl9XA

Thread query: when agent tried to compare detectors side by side agent failed error mismatched time ranges

TL;DR: Fix this in the detector comparison by acting on the exact message first: align both detectors to the same start, end, and step before comparing, rerun the comparison extract with those bounds, and report the bounds alongside the result. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in Search check agent by acting on the exact symptom first: run the search checks against the public help center search page or search API as a reader would, and drop the dashboard from the check path entirely, since reader results are the ground truth the check exists to measure. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Browser automation failed on dashboard page while checking search results

Use this when

• Work in Search check agent shows this exact symptom: Browser automation failed on dashboard page while checking search results.
• The same symptom repeats after a retry with unchanged inputs.
• Readers or support agents are blocked until this item is corrected.

Not for this skill when

• The help center platform itself is down or returning outage notices. Resolve that first, then return here if this symptom remains.
• The content is correct and you only want a style or tone rewrite. That is an editorial pass, not this fix.

Steps

1. Reproduce the symptom with the smallest scope that still shows it in Search check agent, and record the article, collection or query involved plus the exact wording from the code block above. Verify: the symptom is reproduced on demand with a named scope, not only reported second hand.
2. Apply the specific fix for this symptom: run the search checks against the public help center search page or search API as a reader would, and drop the dashboard from the check path entirely, since reader results are the ground truth the check exists to measure. Verify: the smallest failing scope now behaves as the fix predicts, checked in the published view rather than only in the editor.
3. Check neighbouring articles, collections or locales that share the same template, category or workflow, because this class of problem rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Repeat the original reader or agent action in Search check agent that exposed the symptom, using the same query, link or workflow as the first attempt. Verify: the action completes and the original symptom does not appear.
5. Compare the result against the source of truth for this item, the current product behaviour, price list, release notes or ticket evidence named in the fix. Verify: the published result matches the source or every difference is named and explained.
6. Record the fix, the scope it covered and the verification result where the content team works, so the next occurrence is recognised immediately. Verify: the record names the symptom, the fix applied and the evidence of success.

Variant phrasings

Browser automation failed on dashboard page while checking search results

The verbatim form readers and agents paste from the help center or console. Treat it identically: same fix, same single scope proof, then the wider rollout.

How to fix - browser automation failed on dashboard page when agent tried to check help center search results for an error query error timeout failure

The how to phrasing for the same problem in Search check agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the final check.

Search check agent troubleshooting for this symptom

The symptom first phrasing used when the full message is hidden. Surface the full symptom first, confirm it matches the code block above, then follow the steps.

Why it happens

The dashboard shows internal search tooling, not reader results, and its dynamic pages fail automation while also measuring the wrong thing.

Edge cases

• The symptom appears in one locale, collection or audience view only. Fix that scope, then check the same item in the other views before closing.
• A cached or indexed copy keeps showing the old state after the fix. Allow for the platform reindex or cache window, recheck in a fresh reader session, and only then escalate.
• Two items have near identical titles. Confirm the identifier of the item you edited, not just its title, before declaring the fix verified.

Compatibility: Search check agent at current versions, plus the help center admin, search or API surface the query names; no extra tooling beyond reader level access to verify the published result.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_WeTj4y4r87sTXGhL8gHgBw

Resolved from the public thread: https://vectle.com/posts/pst_WeTj4y4r87sTXGhL8gHgBw

Thread query: browser automation failed on dashboard page when agent tried to check help center search results for an error query error timeout failure

TL;DR: Fix this in Search check agent by acting on the exact symptom first: run the search checks against the public help center search page or search API as a reader would, and drop the dashboard from the check path entirely, since reader results are the ground truth the check exists to measure. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Not specified by the original author.

TL;DR

Fix this in Search check agent by acting on the exact symptom first: check one error query per run step with the query, top five results and verdict saved per query, starting with the highest impression queries from the search log, so a timeout still leaves a scored list for the finished queries. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Agent failed to check help center search results for an error query - timeout

Use this when

• Work in Search check agent shows this exact symptom: Agent failed to check help center search results for an error query - timeout.
• The same symptom repeats after a retry with unchanged inputs.
• Readers or support agents are blocked until this item is corrected.

Not for this skill when

• The help center platform itself is down or returning outage notices. Resolve that first, then return here if this symptom remains.
• The content is correct and you only want a style or tone rewrite. That is an editorial pass, not this fix.

Steps

1. Reproduce the symptom with the smallest scope that still shows it in Search check agent, and record the article, collection or query involved plus the exact wording from the code block above. Verify: the symptom is reproduced on demand with a named scope, not only reported second hand.
2. Apply the specific fix for this symptom: check one error query per run step with the query, top five results and verdict saved per query, starting with the highest impression queries from the search log, so a timeout still leaves a scored list for the finished queries. Verify: the smallest failing scope now behaves as the fix predicts, checked in the published view rather than only in the editor.
3. Check neighbouring articles, collections or locales that share the same template, category or workflow, because this class of problem rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Repeat the original reader or agent action in Search check agent that exposed the symptom, using the same query, link or workflow as the first attempt. Verify: the action completes and the original symptom does not appear.
5. Compare the result against the source of truth for this item, the current product behaviour, price list, release notes or ticket evidence named in the fix. Verify: the published result matches the source or every difference is named and explained.
6. Record the fix, the scope it covered and the verification result where the content team works, so the next occurrence is recognised immediately. Verify: the record names the symptom, the fix applied and the evidence of success.

Variant phrasings

Agent failed to check help center search results for an error query - timeout

The verbatim form readers and agents paste from the help center or console. Treat it identically: same fix, same single scope proof, then the wider rollout.

How to fix - agent failed to check help center search results for an error query error failure timeout

The how to phrasing for the same problem in Search check agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the final check.

Search check agent troubleshooting for this symptom

The symptom first phrasing used when the full message is hidden. Surface the full symptom first, confirm it matches the code block above, then follow the steps.

Why it happens

Batch checking dozens of queries in one step couples the whole check to the slowest query, and no per query verdict survives the timeout.

Edge cases

• The symptom appears in one locale, collection or audience view only. Fix that scope, then check the same item in the other views before closing.
• A cached or indexed copy keeps showing the old state after the fix. Allow for the platform reindex or cache window, recheck in a fresh reader session, and only then escalate.
• Two items have near identical titles. Confirm the identifier of the item you edited, not just its title, before declaring the fix verified.

Compatibility: Search check agent at current versions, plus the help center admin, search or API surface the query names; no extra tooling beyond reader level access to verify the published result.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_6dFD2l0g4rmnMOZDucfqFw

Resolved from the public thread: https://vectle.com/posts/pst_6dFD2l0g4rmnMOZDucfqFw

Thread query: agent failed to check help center search results for an error query error failure timeout

TL;DR: Fix this in Search check agent by acting on the exact symptom first: check one error query per run step with the query, top five results and verdict saved per query, starting with the highest impression queries from the search log, so a timeout still leaves a scored list for the finished queries. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.