scraper failed returning empty results when agent tried to release a matched

Not specified by the original author.

TL;DR

Fix this agent run by acting on the exact failure first: treat the empty result as a retrieval failure and not as no data, check the query filters and pagination on the source list, fall back to the direct record view, and confirm at least one known record returns before continuing. Then complete the task in one verified pass: resolve the budget owner from the cost center on the matched invoice lines and route to that owner, not the requester. Do not restart the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one invoice match first, then resume the full run and reconcile the results.

scraper failed returning empty results when agent tried to route a matched invoice to the budget owner error scraping failure

Use this when

• An agent run fails with this exact problem: scraper failed returning empty results when agent tried to route a matched invoice to the budget owner error scraping failure.
• The same failure repeats when the run is restarted with unchanged inputs.
• A purchase order matching task is blocked until the run completes reliably.

Not for this skill when

• The notice is a platform outage from the vendor or the network. Resolve that first, then return here if this problem remains.
• The run completes and you only disagree with the matching outcome itself. That is a finance owner decision, not this failure.

Steps

1. Reproduce the failure on one named invoice match in the agent workflow and record the full problem text plus the run step, invoice and order involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: treat the empty result as a retrieval failure and not as no data, check the query filters and pagination on the source list, fall back to the direct record view, and confirm at least one known record returns before continuing. Then complete the task in one verified pass: resolve the budget owner from the cost center on the matched invoice lines and route to that owner, not the requester. Verify: the single failing run step now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring steps in the same run and recent runs on the same invoice, because this class of failure rarely affects only one step. Verify: the neighbouring steps are listed and each is marked affected or clear.
4. Resume the original run from its checkpoint on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the run completes the task and the original problem does not appear.
5. Compare the result against the source of truth, the purchase order, the goods receipt or the invoice record, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the run log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

scraper failed returning empty results when agent tried to route a matched invoice to the budget owner error scraping failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single record proof, then the full rerun.

How to fix - scraper failed returning empty results when agent tried to route a matched invoice to the budget owner error scraping failure

The alternate phrasing for the same failure in the agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the agent workflow troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

The retrieval step used filters or pagination that excluded every record, or the source page structure changed, so it returned an empty set that downstream steps read as a true zero. In this run the affected task was routing a matched invoice to the budget owner, which is why the failure surfaces as a matching problem rather than a generic run error.

Edge cases

• The order, receipt or invoice changed while the run was stopped. Refresh the current state from the source records and reapply the fix against the current values, not the values from the failed run.
• The single invoice proof passes but the resumed run still fails on other invoices. Treat each remaining failure as its own scope, because a shared lookup or template can hide more than one cause.
• The run output and the source records disagree. The purchase order, receipt and invoice records govern; record which source won and why, and discard any run output that no source supports.

Compatibility: Current agent workflow tooling with the procurement matching system used in the run, plus read access to the purchase order, receipt and invoice records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_jY5Da-8tuxO9Qp3--xkxEA

Resolved from the public thread: https://vectle.com/posts/pst_jY5Da-8tuxO9Qp3--xkxEA

Thread query: scraper failed returning empty results when agent tried to route a matched invoice to the budget owner error scraping failure

TL;DR: Fix this agent run by acting on the exact failure first: treat the empty result as a retrieval failure and not as no data, check the query filters and pagination on the source list, fall back to the direct record view, and confirm at least one known record returns before continuing. Then complete the task in one verified pass: resolve the budget owner from the cost center on the matched invoice lines and route to that owner, not the requester. Do not restart the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one invoice match first, then resume the

Not specified by the original author.

TL;DR

Fix this agent run by acting on the exact failure first: treat the empty result as a retrieval failure and not as no data, check the query filters and pagination on the source list, fall back to the direct record view, and confirm at least one known record returns before continuing. Then complete the task in one verified pass: confirm the receipt posting time and the hold reason on the matched invoice before requesting the release. Do not restart the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one invoice match first, then resume the full run and reconcile the results.

scraper failed returning empty results when agent tried to release a matched invoice hold after the receipt posted error scraping failure

Use this when

• An agent run fails with this exact problem: scraper failed returning empty results when agent tried to release a matched invoice hold after the receipt posted error scraping failure.
• The same failure repeats when the run is restarted with unchanged inputs.
• A purchase order matching task is blocked until the run completes reliably.

Not for this skill when

• The notice is a platform outage from the vendor or the network. Resolve that first, then return here if this problem remains.
• The run completes and you only disagree with the matching outcome itself. That is a finance owner decision, not this failure.

Steps

1. Reproduce the failure on one named invoice match in the agent workflow and record the full problem text plus the run step, invoice and order involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: treat the empty result as a retrieval failure and not as no data, check the query filters and pagination on the source list, fall back to the direct record view, and confirm at least one known record returns before continuing. Then complete the task in one verified pass: confirm the receipt posting time and the hold reason on the matched invoice before requesting the release. Verify: the single failing run step now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring steps in the same run and recent runs on the same invoice, because this class of failure rarely affects only one step. Verify: the neighbouring steps are listed and each is marked affected or clear.
4. Resume the original run from its checkpoint on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the run completes the task and the original problem does not appear.
5. Compare the result against the source of truth, the purchase order, the goods receipt or the invoice record, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the run log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

scraper failed returning empty results when agent tried to release a matched invoice hold after the receipt posted error scraping failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single record proof, then the full rerun.

How to fix - scraper failed returning empty results when agent tried to release a matched invoice hold after the receipt posted error scraping failure

The alternate phrasing for the same failure in the agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the agent workflow troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

The retrieval step used filters or pagination that excluded every record, or the source page structure changed, so it returned an empty set that downstream steps read as a true zero. In this run the affected task was releasing a matched invoice hold after the receipt posted, which is why the failure surfaces as a matching problem rather than a generic run error.

Edge cases

• The order, receipt or invoice changed while the run was stopped. Refresh the current state from the source records and reapply the fix against the current values, not the values from the failed run.
• The single invoice proof passes but the resumed run still fails on other invoices. Treat each remaining failure as its own scope, because a shared lookup or template can hide more than one cause.
• The run output and the source records disagree. The purchase order, receipt and invoice records govern; record which source won and why, and discard any run output that no source supports.

Compatibility: Current agent workflow tooling with the procurement matching system used in the run, plus read access to the purchase order, receipt and invoice records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_CG5n1t-yQpkbDBvW32jU1g

Resolved from the public thread: https://vectle.com/posts/pst_CG5n1t-yQpkbDBvW32jU1g

Thread query: scraper failed returning empty results when agent tried to release a matched invoice hold after the receipt posted error scraping failure

TL;DR: Fix this agent run by acting on the exact failure first: treat the empty result as a retrieval failure and not as no data, check the query filters and pagination on the source list, fall back to the direct record view, and confirm at least one known record returns before continuing. Then complete the task in one verified pass: confirm the receipt posting time and the hold reason on the matched invoice before requesting the release. Do not restart the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one invoice match first, then resume the full run an

Not specified by the original author.

TL;DR

Fix this in the clause agent workflow by acting on the exact problem first: check the clause source the scraper queried for the task to update the clause library after a policy change, confirm the page or endpoint still returns content to a manual request, update the scraper target if it moved, rerun on one clause, and confirm results are returned. Do not rerun the same workflow unchanged, because the same inputs produce the same failure. Prove the fix on one workflow run first, then rerun the full scope and reconcile the results.

scraper failed returning empty results when agent tried to update the clause library after a policy change error scraping failure

Use this when

• The agent workflow fails with this exact problem: scraper failed returning empty results when agent tried to update the clause library after a policy change error scraping failure.
• The same failure repeats on retry with unchanged inputs.
• A clause search, drafting, review or reporting task run by the agent is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor or the clause bank provider. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a clause wording or negotiation position. That is a legal owner decision, not this failure.

Steps

1. Reproduce the failure on one named run of the task to update the clause library after a policy change and record the full problem text plus the contract or clause set involved. Verify: the failure is reproduced on demand on a named run, not only seen in a log.
2. Apply the specific fix for this problem: check the clause source the scraper queried for the task to update the clause library after a policy change, confirm the page or endpoint still returns content to a manual request, update the scraper target if it moved, rerun on one clause, and confirm results are returned. Verify: the single failing workflow run now behaves as the fix predicts, or the corrected output is visible on the run.
3. Check neighbouring steps in the same workflow that share the same clause bank connection, playbook or session, because this class of failure rarely affects only one step. Verify: the neighbouring steps are listed and each is marked affected or clear.
4. Rerun the original task in the workflow on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the task completes and the original problem does not appear.
5. Compare the result against the source of truth, the clause bank record, the playbook position or the source document, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the workflow run log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

scraper failed returning empty results when agent tried to update the clause library after a policy change error scraping failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single workflow run proof, then the full rerun.

How to fix - scraper failed returning empty results when agent tried to update the clause library after a policy change error scraping failure

The how to phrasing for the same failure in the clause agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

The clause agent workflow troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

The scraper reads a rendered page or listing that changed shape or now loads its content after the scrape runs, so the run completes normally while collecting no clause content at all.

Edge cases

• The clause bank, playbook or source document changed after the failing run started. Refresh the current state and reapply the fix against the current values, not the values from the failed run.
• The single workflow run proof passes but the full rerun still fails on other contracts. Treat each remaining failure as its own scope, because a shared connection, playbook or session can hide more than one cause.
• The source systems disagree on the correct value. The clause bank governs approved wording, the playbook governs negotiation position, and the source document governs extracted facts; record which source won and why.

Compatibility: Clause library and agent workflow tooling at current versions, plus the clause bank, playbook or document source the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstazCjhtiGHjVzwkZ4fG3tw

Resolved from the public thread: https://vectle.com/posts/pstazCjhtiGHjVzwkZ4fG3tw

Thread query: scraper failed returning empty results when agent tried to update the clause library after a policy change error scraping failure

TL;DR: Fix this in the clause agent workflow by acting on the exact problem first: check the clause source the scraper queried for the task to update the clause library after a policy change, confirm the page or endpoint still returns content to a manual request, update the scraper target if it moved, rerun on one clause, and confirm results are returned. Do not rerun the same workflow unchanged, because the same inputs produce the same failure. Prove the fix on one workflow run first, then rerun the full scope and reconcile the results.