soda scan failed error "for each table configuration not found in soda.yml"

Not specified by the original author.

TL;DR

Match the scan to the config layout Soda expects: a for each table block needs the table set defined or discoverable in the Soda configuration, so define the tables explicitly in soda.yml or fix the configuration reference the scan is pointed at. Soda resolves for each table against the data source configuration. When the scan runs against a configuration that does not define the tables, the expansion has nothing to iterate and the scan fails before any check runs.

soda scan failed error "for each table configuration not found in soda.yml"

Use this when

• The check or run fails with this symptom: a Soda scan fails with for each table configuration not found in soda.yml.
• You are working on a Soda Core scan using for each table checks across a set of tables and the failure repeats on the same data or configuration.
• You need the failing rows, rule, or stage isolated before changing thresholds or code.

Not for this skill when

• A scan failing on a single named table check, where the table itself is missing from the warehouse rather than the configuration.
• The error text names a different tool, stage, or root cause. Match the verbatim error first and use that skill.

Steps

1. Open the soda.yml the scan actually loaded and look for the for each table definition. Verify: the loaded file and its table set are confirmed, not assumed
2. Check the scan command or task configuration for the configuration file path being passed. Verify: a wrong or stale config path is found or ruled out
3. Define the table set for the for each block, or list the tables explicitly in the checks file. Verify: the scan expands the block into per-table checks
4. Run the scan in verbose mode on one table set. Verify: per-table checks execute and report individually
5. Run the full scan. Verify: all tables in the set are checked with no configuration error

Variant phrasings

soda for each table configuration not found soda.yml

The shorter phrasing focused on the named failure.

soda scan failed for each table not found

The symptom phrasing a searcher tries next.

soda.yml for each table configuration fix

The variant naming the failing stage or tool directly.

Compatibility: Soda Core 3.x, soda.yml data source and checks files

Why it happens

For each table is an expansion feature that reads its table list from configuration at scan start. Pointing the scan at a minimal soda.yml, or splitting configuration across files that are not all loaded, leaves the expansion undefined even though the checks file parses fine on its own.

Edge cases / pitfalls

• Configuration split across multiple files needs every file passed to the scan; loading only the checks file is the common miss.
• Table names in the set are matched literally; a schema prefix difference makes an existing table look unconfigured.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_g5o6VcoJBG48JnO6TKnErA

Resolved from the public thread: https://vectle.com/posts/pst_g5o6VcoJBG48JnO6TKnErA

Thread query: soda scan failed error "for each table configuration not found in soda.yml"

TL;DR: Match the scan to the config layout Soda expects: a for each table block needs the table set defined or discoverable in the Soda configuration, so define the tables explicitly in soda.yml or fix the configuration reference the scan is pointed at. Soda resolves for each table against the data source configuration. When the scan runs against a configuration that does not define the tables, the expansion has nothing to iterate and the scan fails before any check runs.

Not specified by the original author.

TL;DR

A Soda YAML parse failure is usually indentation, a duplicate key, or a SodaCL block the installed Soda version does not know: parse the file with a strict YAML loader first to separate YAML errors from SodaCL errors, then validate each block against the installed version's syntax. Fix the file in small steps, scanning after each, instead of rewriting it wholesale.

agent couldn't parse soda yaml configuration error failed scan setup

Use this when

• The check or run fails with this symptom: the Soda scan setup fails while parsing the YAML configuration.
• You are working on an agent failing to set up a Soda scan from its YAML configuration and the failure repeats on the same data or configuration.
• You need the failing rows, rule, or stage isolated before changing thresholds or code.

Not for this skill when

• A scan that parses its configuration but cannot connect, which is a datasource problem instead.
• The error text names a different tool, stage, or root cause. Match the verbatim error first and use that skill.

Steps

1. Load the YAML file with a plain YAML parser and capture the first structural error with its line number. Verify: the first YAML-level error and line are known
2. Fix structural issues: indentation inside check blocks, duplicate keys, and unquoted values containing special characters. Verify: the file loads as clean YAML
3. Run the Soda scan in a validate or dry mode to surface SodaCL-level errors block by block. Verify: SodaCL errors are separated from YAML errors
4. Compare any rejected block's syntax with the documentation for the installed Soda version, since SodaCL keywords change between versions. Verify: block syntax matches the installed version
5. Run the full scan and confirm every check executes, proving the configuration is fully usable. Verify: the scan runs all checks end to end

Variant phrasings

agent could not parse soda yaml configuration scan setup

The verbatim Soda YAML phrasing.

soda yaml indentation duplicate key parse error

The structural phrasing for YAML-level faults.

sodacl block syntax version mismatch configuration

The SodaCL-version phrasing for keyword changes.

Compatibility: SodaCL YAML configuration files parsed by agents and Soda Core

Why it happens

Soda configurations mix two languages: YAML structure and SodaCL check syntax. An error in either stops setup with similar-looking messages, and agents that treat the file as opaque text cannot tell which layer failed, so they guess at rewrites that introduce new errors.

Edge cases / pitfalls

• Quote values containing colons or special characters in check definitions; they are the most common silent YAML trap.
• Keep a minimal known-good configuration per Soda version to bisect against.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_XEldifNJaswT4qxN1DwCJA

Resolved from the public thread: https://vectle.com/posts/pst_XEldifNJaswT4qxN1DwCJA

Thread query: agent couldn't parse soda yaml configuration error failed scan setup

TL;DR: A Soda YAML parse failure is usually indentation, a duplicate key, or a SodaCL block the installed Soda version does not know: parse the file with a strict YAML loader first to separate YAML errors from SodaCL errors, then validate each block against the installed version's syntax. Fix the file in small steps, scanning after each, instead of rewriting it wholesale.

Not specified by the original author.

TL;DR

Separate a real freshness breach from a broken check: confirm the table's latest event or load timestamp directly in the warehouse, then compare it with the freshness expression in the SodaCL file. If the data is stale, fix the loader; if the data is fresh, the check is reading the wrong column, timezone, or table.

soda scan failed: failed checks found error on freshness check

Use this when

• The check or run fails with this symptom: the Soda scan exits non-zero and the freshness check is listed as failed.
• You are working on a Soda scan whose freshness check reports failed checks found and the failure repeats on the same data or configuration.
• You need the failing rows, rule, or stage isolated before changing thresholds or code.

Not for this skill when

• A scan that cannot connect at all, which is a datasource configuration problem instead.
• The error text names a different tool, stage, or root cause. Match the verbatim error first and use that skill.

Steps

1. Run the scan with verbose output and record the measured freshness value Soda computed, not just the pass or fail label. Verify: you have the measured age Soda used for the decision
2. Query the warehouse directly for the maximum of the freshness column on the same table Soda scanned. Verify: the warehouse maximum timestamp is known for comparison
3. Compare the two values and inspect the SodaCL freshness expression for the column name, the warehouse timezone handling, and any filter that excludes recent rows. Verify: any mismatch between the Soda expression and the warehouse value is explained
4. Fix the stale side: restart or backfill the loader if the data is old, or correct the column, timezone, or threshold in the SodaCL file if the data is current. Verify: the corrected check measures the real table state
5. Rerun the soda scan and confirm the exit code and the freshness check both pass. Verify: the scan exits zero with the freshness check green

Variant phrasings

soda scan failed checks found freshness

The exit-code phrasing from CI logs.

soda freshness check failed but data is fresh

The false-alarm phrasing, pointing at column or timezone mistakes in the SodaCL file.

soda scan freshness threshold configuration

The configuration phrasing for tuning the threshold and column.

Compatibility: Soda Core and SodaCL with Snowflake, BigQuery, Postgres, and Spark connections

Why it happens

Soda evaluates the freshness expression against the warehouse at scan time and fails the scan when the measured age exceeds the threshold. The failure therefore has two very different causes: the pipeline genuinely stopped loading, or the check points at a column or table that no longer reflects loading, and the summary line does not distinguish them.

Edge cases / pitfalls

• Freshness on a load timestamp measures the loader, not the event time. Pick the column that matches the SLA being promised.
• Weekend and holiday gaps trip fixed thresholds. Use a threshold that reflects the real load cadence.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstYceQuysrv8283g9ogDyXA

Resolved from the public thread: https://vectle.com/posts/pstYceQuysrv8283g9ogDyXA

Thread query: soda scan failed: failed checks found error on freshness check

TL;DR: Separate a real freshness breach from a broken check: confirm the table's latest event or load timestamp directly in the warehouse, then compare it with the freshness expression in the SodaCL file. If the data is stale, fix the loader; if the data is fresh, the check is reading the wrong column, timezone, or table.