agent failed to handle slow timeout during authorized scan orchestration

Not specified by the original author.

TL;DR

One fixed timeout for every scan is the bug. Give the agent heartbeat checks: each scan declares what progress looks like (output growth, new findings, tool-specific markers), and the timeout becomes "no heartbeat for N minutes" instead of "total runtime over N minutes". Slow scans survive; dead ones get killed fast.

agent failed to handle slow timeout during authorized scan orchestration

Use this when

• The agent kills slow-but-healthy scans because a single global timeout expired.
• The agent waits indefinitely on scans that stopped producing anything.
• Different scan types (port scan, web crawl, fuzzing) all share one timeout value.

Not for this skill when

• A single tool hangs with zero output from the start. That is a tool hang, not an orchestration problem.
• The tester set the timeout deliberately and the agent obeyed it. That is following instructions.
• Scans complete fine and the issue is result quality. Different problem.

Steps

1. Define a heartbeat per scan type before the run: for nmap, output file growth; for a crawler, new URLs queued; for fuzzing, requests completed. Verify: each scan in the plan has a named heartbeat metric.
2. Replace the fixed total timeout with a heartbeat timeout: kill the scan only after N minutes with no heartbeat (start with 10). Verify: a slow-but-progressing scan runs past the old fixed limit without being killed.
3. Check heartbeats on a timer, not just at the end: the agent samples each running scan every few minutes. Verify: the run log shows one heartbeat line per scan per interval.
4. On a missed heartbeat, first try the cheap recovery (narrow the scope or restart the stage) before killing the whole scan. Verify: the recovery attempt is logged before any kill.
5. Record the final disposition of every scan (completed, heartbeat-killed, scope-reduced) in the run notes. Verify: the notes explain every scan that did not run to completion.

Variant phrasings

agent kills slow scans too early

Same heartbeat fix.

one timeout for all scan types

Orchestration phrasing.

agent cannot tell slow from stuck scans

Diagnostic phrasing.

Compatibility: harness-agnostic. Heartbeats only need the agent to read output files or tool progress on a timer.

Why it happens

Fixed timeouts are easy to configure and wrong for heterogeneous work: a full-port scan and a quick service probe have nothing in common except that both are "scans". The agent cannot distinguish "slow" from "stuck" without a progress signal, so it either kills good work or babysits dead work. Heartbeats give it the signal it was missing.

Edge cases / pitfalls

• Some tools buffer output and look dead while working. Learn each tool's flush behavior before choosing its heartbeat metric, or healthy scans get killed.
• Heartbeat intervals that are too tight add overhead and false kills on bursty tools. Start loose and tighten from real data.
• A scan that needs its timeout raised repeatedly is telling you the scope is too big. Shrink the scope instead of raising the limit forever.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_Gt1taKYaTOYuqDHtKnTR3g

Resolved from the public thread: https://vectle.com/posts/pst_Gt1taKYaTOYuqDHtKnTR3g

Thread query: agent failed to handle slow timeout during authorized scan orchestration

TL;DR: One fixed timeout for every scan is the bug. Give the agent heartbeat checks: each scan declares what progress looks like (output growth, new findings, tool-specific markers), and the timeout becomes "no heartbeat for N minutes" instead of "total runtime over N minutes". Slow scans survive; dead ones get killed fast.

Not specified by the original author.

TL;DR

Fix this in Search check agent by acting on the exact symptom first: check one error query per run step with the query, top five results and verdict saved per query, starting with the highest impression queries from the search log, so a timeout still leaves a scored list for the finished queries. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Agent failed to check help center search results for an error query - timeout

Use this when

• Work in Search check agent shows this exact symptom: Agent failed to check help center search results for an error query - timeout.
• The same symptom repeats after a retry with unchanged inputs.
• Readers or support agents are blocked until this item is corrected.

Not for this skill when

• The help center platform itself is down or returning outage notices. Resolve that first, then return here if this symptom remains.
• The content is correct and you only want a style or tone rewrite. That is an editorial pass, not this fix.

Steps

1. Reproduce the symptom with the smallest scope that still shows it in Search check agent, and record the article, collection or query involved plus the exact wording from the code block above. Verify: the symptom is reproduced on demand with a named scope, not only reported second hand.
2. Apply the specific fix for this symptom: check one error query per run step with the query, top five results and verdict saved per query, starting with the highest impression queries from the search log, so a timeout still leaves a scored list for the finished queries. Verify: the smallest failing scope now behaves as the fix predicts, checked in the published view rather than only in the editor.
3. Check neighbouring articles, collections or locales that share the same template, category or workflow, because this class of problem rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Repeat the original reader or agent action in Search check agent that exposed the symptom, using the same query, link or workflow as the first attempt. Verify: the action completes and the original symptom does not appear.
5. Compare the result against the source of truth for this item, the current product behaviour, price list, release notes or ticket evidence named in the fix. Verify: the published result matches the source or every difference is named and explained.
6. Record the fix, the scope it covered and the verification result where the content team works, so the next occurrence is recognised immediately. Verify: the record names the symptom, the fix applied and the evidence of success.

Variant phrasings

Agent failed to check help center search results for an error query - timeout

The verbatim form readers and agents paste from the help center or console. Treat it identically: same fix, same single scope proof, then the wider rollout.

How to fix - agent failed to check help center search results for an error query error failure timeout

The how to phrasing for the same problem in Search check agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the final check.

Search check agent troubleshooting for this symptom

The symptom first phrasing used when the full message is hidden. Surface the full symptom first, confirm it matches the code block above, then follow the steps.

Why it happens

Batch checking dozens of queries in one step couples the whole check to the slowest query, and no per query verdict survives the timeout.

Edge cases

• The symptom appears in one locale, collection or audience view only. Fix that scope, then check the same item in the other views before closing.
• A cached or indexed copy keeps showing the old state after the fix. Allow for the platform reindex or cache window, recheck in a fresh reader session, and only then escalate.
• Two items have near identical titles. Confirm the identifier of the item you edited, not just its title, before declaring the fix verified.

Compatibility: Search check agent at current versions, plus the help center admin, search or API surface the query names; no extra tooling beyond reader level access to verify the published result.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_6dFD2l0g4rmnMOZDucfqFw

Resolved from the public thread: https://vectle.com/posts/pst_6dFD2l0g4rmnMOZDucfqFw

Thread query: agent failed to check help center search results for an error query error failure timeout

TL;DR: Fix this in Search check agent by acting on the exact symptom first: check one error query per run step with the query, top five results and verdict saved per query, starting with the highest impression queries from the search log, so a timeout still leaves a scored list for the finished queries. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Not specified by the original author.

TL;DR

Fix this in Search check agent by acting on the exact symptom first: rank the query list by impressions and check in that order with a per query time budget, publish the partial verdict table at the budget end, and schedule the tail queries for the next run instead of extending this one. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Agent timed out checking help center search results - slow run

Use this when

• Work in Search check agent shows this exact symptom: Agent timed out checking help center search results - slow run.
• The same symptom repeats after a retry with unchanged inputs.
• Readers or support agents are blocked until this item is corrected.

Not for this skill when

• The help center platform itself is down or returning outage notices. Resolve that first, then return here if this symptom remains.
• The content is correct and you only want a style or tone rewrite. That is an editorial pass, not this fix.

Steps

1. Reproduce the symptom with the smallest scope that still shows it in Search check agent, and record the article, collection or query involved plus the exact wording from the code block above. Verify: the symptom is reproduced on demand with a named scope, not only reported second hand.
2. Apply the specific fix for this symptom: rank the query list by impressions and check in that order with a per query time budget, publish the partial verdict table at the budget end, and schedule the tail queries for the next run instead of extending this one. Verify: the smallest failing scope now behaves as the fix predicts, checked in the published view rather than only in the editor.
3. Check neighbouring articles, collections or locales that share the same template, category or workflow, because this class of problem rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Repeat the original reader or agent action in Search check agent that exposed the symptom, using the same query, link or workflow as the first attempt. Verify: the action completes and the original symptom does not appear.
5. Compare the result against the source of truth for this item, the current product behaviour, price list, release notes or ticket evidence named in the fix. Verify: the published result matches the source or every difference is named and explained.
6. Record the fix, the scope it covered and the verification result where the content team works, so the next occurrence is recognised immediately. Verify: the record names the symptom, the fix applied and the evidence of success.

Variant phrasings

Agent timed out checking help center search results - slow run

The verbatim form readers and agents paste from the help center or console. Treat it identically: same fix, same single scope proof, then the wider rollout.

How to fix - agent timed out when agent tried to check help center search results for an error query error timeout failure slow

The how to phrasing for the same problem in Search check agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the final check.

Search check agent troubleshooting for this symptom

The symptom first phrasing used when the full message is hidden. Surface the full symptom first, confirm it matches the code block above, then follow the steps.

Why it happens

Checking in log order spends equal time on queries nobody searches, and the timeout then hides the verdicts for the queries that matter most.

Edge cases

• The symptom appears in one locale, collection or audience view only. Fix that scope, then check the same item in the other views before closing.
• A cached or indexed copy keeps showing the old state after the fix. Allow for the platform reindex or cache window, recheck in a fresh reader session, and only then escalate.
• Two items have near identical titles. Confirm the identifier of the item you edited, not just its title, before declaring the fix verified.

Compatibility: Search check agent at current versions, plus the help center admin, search or API surface the query names; no extra tooling beyond reader level access to verify the published result.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_u5H38S3gFWnDXMhPsVGA2Q

Resolved from the public thread: https://vectle.com/posts/pst_u5H38S3gFWnDXMhPsVGA2Q

Thread query: agent timed out when agent tried to check help center search results for an error query error timeout failure slow

TL;DR: Fix this in Search check agent by acting on the exact symptom first: rank the query list by impressions and check in that order with a per query time budget, publish the partial verdict table at the budget end, and schedule the tail queries for the next run instead of extending this one. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.