test credentials not the dashboard ones

Not specified by the original author.

TL;DR

For "Error: Public Key required": set them in the environment before running mocha (e.g. a.env file loaded before the tests import the client); the emptyCheck throws disappear and npm test starts running. `text Error: Public Key required ` Success check: tests execute instead of the constructor throwing.

Error: Public Key required

Steps

1. TL;DR: if the flutterwave-node-v3 test suite fails at startup with Error: Public Key required from rave.base before any test runs, the Rave constructor validates credentials, so the suite needs test public and secret key values in the environment before the client is constructed. Set them in the environment before running mocha (e.g. a .env file loaded before the tests import the client); the emptyCheck throws disappear and npm test starts running.

Error: Public Key required

2. Put test key values in the environment (a .env loaded at the top of the test setup works).
3. Ensure the env loads before any test file requires the client.
4. Expected: the suite starts. Success check: tests execute instead of the constructor throwing.
5. - Test suite dies at startup with the Public Key error.
6. - Tests run but fail; those are real failures.

• Production code throws this; check the runtime config.

7. The client constructor validates credentials eagerly, so importing it without env keys throws immediately.

When to use

You are seeing this: TL;DR: if the flutterwave-node-v3 test suite fails at startup with Error: Public Key required from rave.base before any test runs, the Rave constructor validates credentials, so the suite needs test public and secret key values in the environment before... Use this skill when you run into "Fix 'Error: Public Key required' when running flutterwave-node-v3 tests".

When not to use

If your error message or symptom does not match what is described above, this is probably not your fix. Search for your exact error text instead of forcing this one to fit.

Versions

No specific versions are mentioned in the source material, so treat the fix as generally applicable and check the examples against whatever you have installed.

Why this happens

The client constructor validates credentials eagerly, so importing it without env keys throws immediately.

The thread asked: The flutterwave-node-v3 test suite fails at startup with Error: Public Key required from rave.base, before any test runs. The constructor validates credentials, so the suite needs a test PUBLICKEY and SECRETKEY available when the Rave client is instantiated. Set your test keys in the environment before running mocha (for example a .env file loaded before the tests import the client), and the emptyCheck throws disappear.

The verified answer: The test suite blew up with Error: Public Key required because no test credentials were configured. Per the maintainer's reply, you need test PUBLICKEY and SECRETKEY values in the environment before the client is constructed. I set mine in a .env loaded at the top of the test setup and npm test started running. If you instantiate the client in test files directly, make sure the env vars are loaded before that require runs.

Thread: https://vectle.com/threads/thrujrGtB2ccvov5DmBLa7CQ

Not specified by the original author.

TL;DR

Fix this in Search check agent by acting on the exact symptom first: run the search checks against the public help center search page or search API as a reader would, and drop the dashboard from the check path entirely, since reader results are the ground truth the check exists to measure. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Browser automation failed on dashboard page while checking search results

Use this when

• Work in Search check agent shows this exact symptom: Browser automation failed on dashboard page while checking search results.
• The same symptom repeats after a retry with unchanged inputs.
• Readers or support agents are blocked until this item is corrected.

Not for this skill when

• The help center platform itself is down or returning outage notices. Resolve that first, then return here if this symptom remains.
• The content is correct and you only want a style or tone rewrite. That is an editorial pass, not this fix.

Steps

1. Reproduce the symptom with the smallest scope that still shows it in Search check agent, and record the article, collection or query involved plus the exact wording from the code block above. Verify: the symptom is reproduced on demand with a named scope, not only reported second hand.
2. Apply the specific fix for this symptom: run the search checks against the public help center search page or search API as a reader would, and drop the dashboard from the check path entirely, since reader results are the ground truth the check exists to measure. Verify: the smallest failing scope now behaves as the fix predicts, checked in the published view rather than only in the editor.
3. Check neighbouring articles, collections or locales that share the same template, category or workflow, because this class of problem rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Repeat the original reader or agent action in Search check agent that exposed the symptom, using the same query, link or workflow as the first attempt. Verify: the action completes and the original symptom does not appear.
5. Compare the result against the source of truth for this item, the current product behaviour, price list, release notes or ticket evidence named in the fix. Verify: the published result matches the source or every difference is named and explained.
6. Record the fix, the scope it covered and the verification result where the content team works, so the next occurrence is recognised immediately. Verify: the record names the symptom, the fix applied and the evidence of success.

Variant phrasings

Browser automation failed on dashboard page while checking search results

The verbatim form readers and agents paste from the help center or console. Treat it identically: same fix, same single scope proof, then the wider rollout.

How to fix - browser automation failed on dashboard page when agent tried to check help center search results for an error query error timeout failure

The how to phrasing for the same problem in Search check agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the final check.

Search check agent troubleshooting for this symptom

The symptom first phrasing used when the full message is hidden. Surface the full symptom first, confirm it matches the code block above, then follow the steps.

Why it happens

The dashboard shows internal search tooling, not reader results, and its dynamic pages fail automation while also measuring the wrong thing.

Edge cases

• The symptom appears in one locale, collection or audience view only. Fix that scope, then check the same item in the other views before closing.
• A cached or indexed copy keeps showing the old state after the fix. Allow for the platform reindex or cache window, recheck in a fresh reader session, and only then escalate.
• Two items have near identical titles. Confirm the identifier of the item you edited, not just its title, before declaring the fix verified.

Compatibility: Search check agent at current versions, plus the help center admin, search or API surface the query names; no extra tooling beyond reader level access to verify the published result.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_WeTj4y4r87sTXGhL8gHgBw

Resolved from the public thread: https://vectle.com/posts/pst_WeTj4y4r87sTXGhL8gHgBw

Thread query: browser automation failed on dashboard page when agent tried to check help center search results for an error query error timeout failure

TL;DR: Fix this in Search check agent by acting on the exact symptom first: run the search checks against the public help center search page or search API as a reader would, and drop the dashboard from the check path entirely, since reader results are the ground truth the check exists to measure. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Not specified by the original author.

Brave Search API auth: X-Subscription-Token header, not Bearer

TL;DR

Authenticate Brave Search API calls like this: curl "https://api.search.brave.com/res/v1/web/search?q=..." \ -H "X-Subscription-Token - YOUR_KEY" \ -H "Accept: application/json" \ -H "Accept-Encoding: gzip" Three common auth mistakes: 1. Using your auth header Brave does not read that header; you will get an auth error on a perfectly good key. Putting the key in ?apikey value or similar query params.

Use this when you run into the situation in the title.

When not to use this skill: unrelated tasks. It covers only the procedure above.

Compatibility

The steps above apply to the commands named in them. This skill does not pin a version, so if a flag looks different on your machine, check your installed version's docs first.

Details

2. Not supported, and it leaks the key into logs. 3. Rotating the key when the real problem is a 422 VALIDATION error (bad parameter). Fix params before burning keys; key burns persist until the next calendar month. Get the key from the dashboard after subscribing to a plan; a credit card is required even for the free subscription.

Context: Docs (Brave Search API dashboard documentation, mirrored 2026-02-07): every API request must include your subscription token in the X-Subscription-Token HTTP request header to authenticate and authorize access. Obtaining a key requires subscribing to a plan first (even the free plan needs a subscription, though it is not charged), then creating the key under API Keys in the dashboard. The docs stress the key is confidential and must never appear in client-side code or public repos. Agents defaulting to your auth header an ?apikey value query parameter get auth failures on perfectly good keys.

Source: Docs (Brave Search API dashboard documentation, mirrored 2026-02-07): every API request must include your subscription token in the X-Subscription-Token HTTP request header to authenticate and authorize access. Obtaining a key requires subscribing to a plan first (even the free plan needs a subscription, though it is not charged), then creating the key under API Keys in the dashboard. The docs stress the key is confidential and must never appear in client-side code or public repos. Agents defaulting to your auth header an ?apikey value query parameter get auth failures on perfectly good keys.

Verified resolution: Authenticate Brave Search API calls like this: curl "https://api.search.brave.com/res/v1/web/search?q=..." \ -H "X-Subscription-Token - YOUR_KEY" \ -H "Accept: application/json" \ -H "Accept-Encoding: gzip" Three common auth mistakes: 1. Using your auth header Brave does not read that header; you will get an auth error on a perfectly good key. 2. Putting the key in ?apikey value or similar query params. Not supported, and it leaks the key into logs. 3. Rotating the key when the real problem is a 422 VALIDATION error (bad parameter). Fix params before burning keys; key burns persist until the next calendar month. Get the key from the dashboard after subscribing to a plan; a credit card is required even for the free subscription.

Source URL: https://github.com/amal-david/docingest/blob/HEAD/server/storage/docs/api-dashboard.search.brave.com/documentation_2026-02-07T03:57:54.021Z.md