agent loop detected: SOC alert enrichment job re-triggered infinitely fai

Not specified by the original author.

TL;DR

Fix this in the agent workflow for SOC alert enrichment by acting on the exact message first: add a trigger guard so a completed job cannot retrigger itself (compare run IDs and require a new input before the next start). Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent loop detected: SOC alert enrichment job re-triggered infinitely

Use this when

• The operation in the agent workflow for SOC alert enrichment fails with this exact message: agent loop detected: SOC alert enrichment job re-triggered infinitely.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the agent workflow for SOC alert enrichment, and copy the full message plus the alert, incident or enrichment record involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: add a trigger guard so a completed job cannot retrigger itself (compare run IDs and require a new input before the next start). Verify: the job runs once per new input and no self-triggered runs appear in the history.
3. Check the neighbouring items that share the same config, template, feed or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions or alerts against the source in the agent workflow for SOC alert enrichment so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the agent workflow for SOC alert enrichment on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

nothing recorded that the work was already done or already failing, so the scheduler and the agent kept handing the same work back to each other with no exit condition.

Variant phrasings

agent loop detected: SOC alert enrichment job re-triggered infinitely

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent loop detected: SOC alert enrichment job re-triggered infinitely failure error

The how-to phrasing for the same failure in the agent workflow for SOC alert enrichment. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the agent workflow for SOC alert enrichment troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the agent workflow for SOC alert enrichment at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_KeImkBUgi9OPnAd45xVXqA

Resolved from the public thread: https://vectle.com/posts/pst_KeImkBUgi9OPnAd45xVXqA

Thread query: agent loop detected: SOC alert enrichment job re-triggered infinitely failure error

TL;DR: Fix this in the agent workflow for SOC alert enrichment by acting on the exact message first: add a trigger guard so a completed job cannot retrigger itself (compare run IDs and require a new input before the next start). Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the agent workflow for SOC alert enrichment by acting on the exact message first: add a done-marker keyed by task ID so a completed task cannot restart, and cap the agent at one pass per task per run. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent loop detected: repeating the same SOC alert enrichment task error loop

Use this when

• The operation in the agent workflow for SOC alert enrichment fails with this exact message: agent loop detected: repeating the same SOC alert enrichment task error loop.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the agent workflow for SOC alert enrichment, and copy the full message plus the alert, incident or enrichment record involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: add a done-marker keyed by task ID so a completed task cannot restart, and cap the agent at one pass per task per run. Verify: the task executes once and the run log shows the done-marker blocking the repeat.
3. Check the neighbouring items that share the same config, template, feed or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions or alerts against the source in the agent workflow for SOC alert enrichment so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the agent workflow for SOC alert enrichment on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

nothing recorded that the work was already done or already failing, so the scheduler and the agent kept handing the same work back to each other with no exit condition.

Variant phrasings

agent loop detected: repeating the same SOC alert enrichment task error loop

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent loop detected: repeating the same SOC alert enrichment task error loop failure

The how-to phrasing for the same failure in the agent workflow for SOC alert enrichment. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the agent workflow for SOC alert enrichment troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the agent workflow for SOC alert enrichment at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstiWojnMEKvet6XrRsNtVoQ

Resolved from the public thread: https://vectle.com/posts/pstiWojnMEKvet6XrRsNtVoQ

Thread query: agent loop detected: repeating the same SOC alert enrichment task error loop failure

TL;DR: Fix this in the agent workflow for SOC alert enrichment by acting on the exact message first: add a done-marker keyed by task ID so a completed task cannot restart, and cap the agent at one pass per task per run. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in synthetic data agent workflow by acting on the exact message first: find and fix the trigger that refires the job, usually a completion event the job itself emits, add a deduplication guard keyed on the input hash, and require a changed input before the job may run again for the same dataset. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

agent loop detected - synthetic data job re-triggered infinitely

Use this when

• The operation in synthetic data agent workflow fails with this exact message or symptom: agent loop detected - synthetic data job re-triggered infinitely.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in synthetic data agent workflow, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: find and fix the trigger that refires the job, usually a completion event the job itself emits, add a deduplication guard keyed on the input hash, and require a changed input before the job may run again for the same dataset. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in synthetic data agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in synthetic data agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

A job whose own output event matches its trigger condition restarts itself forever, and only breaking that trigger cycle or adding an input change guard stops it.

Variant phrasings

agent loop detected - synthetic data job re-triggered infinitely

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent loop detected: synthetic data job re-triggered infinitely failure error

The how-to phrasing for the same failure in synthetic data agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

synthetic data agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: synthetic data agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_FBmgXpSqex8RLQ3lpCvdUA

Resolved from the public thread: https://vectle.com/posts/pst_FBmgXpSqex8RLQ3lpCvdUA

Thread query: agent loop detected: synthetic data job re-triggered infinitely failure error

TL;DR: Fix this in synthetic data agent workflow by acting on the exact message first: find and fix the trigger that refires the job, usually a completion event the job itself emits, add a deduplication guard keyed on the input hash, and require a changed input before the job may run again for the same dataset. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.