Playwright failed loading the Clay table enrichment run history never confirmed

Not specified by the original author.

TL;DR

Fix this in Clay and Playwright by acting on the exact message first: confirm run status from the Clay run history view or export rather than the table page alone, wait for the table rows to render before reading status, and record the run identifier from the run itself. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

Playwright failed loading the Clay table, the enrichment run history was never confirmed

Use this when

• The operation in Clay and Playwright fails with this exact message: Playwright failed loading the Clay table, the enrichment run history was never confirmed.
• The same failure repeats on retry with unchanged inputs.
• A run, import, export or alert is blocked until this item completes.

Not for this skill when

• The message is a permission or platform outage notice. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in Clay and Playwright, and copy the full message plus the record, account or list involved into the run notes. Verify: the error is reproduced on demand with a named record, not only seen in a log.
2. Apply the specific fix for this error: confirm run status from the Clay run history view or export rather than the table page alone, wait for the table rows to render before reading status, and record the run identifier from the run itself. Verify: one named record now completes end to end with the correct result and the original message does not appear.
3. Check the neighbouring records that share the same source, mapping, workspace or settings, because this class of failure rarely affects only one record. Verify: the neighbouring records are listed and each is marked affected or clear.
4. Compare the result counts, fields or alerts against the source in Clay and Playwright so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in Clay and Playwright on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the record so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The table page rendered slowly and the automation read it before rows loaded, so it reported no status for a run that had in fact completed.

Variant phrasings

Playwright failed loading the Clay table, the enrichment run history was never confirmed

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single record proof, then the full rerun.

How to fix this failure in Clay and Playwright

The how to phrasing for the same failure. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in Clay and Playwright

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: Clay and Playwright at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_Ly3I3s1hfYf6c-DwjQLu5w

Resolved from the public thread: https://vectle.com/posts/pst_Ly3I3s1hfYf6c-DwjQLu5w

Thread query: Playwright failed loading the Clay table enrichment run history never confirmed

TL;DR: Fix this in Clay and Playwright by acting on the exact message first: confirm run status from the Clay run history view or export rather than the table page alone, wait for the table rows to render before reading status, and record the run identifier from the run itself. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the Clay enrichment table by acting on the exact message first: split the table run into chunks, run the timing out step as an async enrichment on a smaller row set, and check whether one provider step is slow for every row or only for rows with a particular input. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

lead enrichment workflow failed error Clay table enrichment step timeout failure

Use this when

• The operation in the Clay enrichment table fails with this exact message: lead enrichment workflow failed error Clay table enrichment step timeout failure.
• The same failure repeats on retry with unchanged inputs.
• A run, import, export or alert is blocked until this item completes.

Not for this skill when

• The message is a permission or platform outage notice. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the Clay enrichment table, and copy the full message plus the record, account or list involved into the run notes. Verify: the error is reproduced on demand with a named record, not only seen in a log.
2. Apply the specific fix for this error: split the table run into chunks, run the timing out step as an async enrichment on a smaller row set, and check whether one provider step is slow for every row or only for rows with a particular input. Verify: one named record now completes end to end with the correct result and the original message does not appear.
3. Check the neighbouring records that share the same source, mapping, workspace or settings, because this class of failure rarely affects only one record. Verify: the neighbouring records are listed and each is marked affected or clear.
4. Compare the result counts, fields or alerts against the source in the Clay enrichment table so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the Clay enrichment table on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the record so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

A synchronous step with a slow provider multiplied by a full table exceeds the table run timeout.

Variant phrasings

lead enrichment workflow failed error Clay table enrichment step timeout failure

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single record proof, then the full rerun.

How to fix this failure in the Clay enrichment table

The how-to phrasing for the same failure. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the Clay enrichment table

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the Clay enrichment table at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_Pb33D6qGCWKUcyFAUkFLNA

Resolved from the public thread: https://vectle.com/posts/pst_Pb33D6qGCWKUcyFAUkFLNA

Thread query: lead enrichment workflow failed error Clay table enrichment step timeout failure

TL;DR: Fix this in the Clay enrichment table by acting on the exact message first: split the table run into chunks, run the timing out step as an async enrichment on a smaller row set, and check whether one provider step is slow for every row or only for rows with a particular input. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in Clay enrichment by acting on the exact message first: open the run log for the attempt to run a waterfall enrichment in Clay, name the first record and step that failed, fix that record or the expired Clay connection it points to, and prove the fix on that single record before rerunning the remainder. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

agent failed to complete run a waterfall enrichment in Clay error failure

Use this when

• The operation in Clay enrichment fails with this exact message: agent failed to complete run a waterfall enrichment in Clay error failure.
• The same failure repeats on retry with unchanged inputs.
• A run, import, export or alert is blocked until this item completes.

Not for this skill when

• The message is a permission or platform outage notice. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in Clay enrichment, and copy the full message plus the record, account or list involved into the run notes. Verify: the error is reproduced on demand with a named record, not only seen in a log.
2. Apply the specific fix for this error: open the run log for the attempt to run a waterfall enrichment in Clay, name the first record and step that failed, fix that record or the expired Clay connection it points to, and prove the fix on that single record before rerunning the remainder. Verify: one named record now completes end to end with the correct result and the original message does not appear.
3. Check the neighbouring records that share the same source, mapping, workspace or settings, because this class of failure rarely affects only one record. Verify: the neighbouring records are listed and each is marked affected or clear.
4. Compare the result counts, fields or alerts against the source in Clay enrichment so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in Clay enrichment on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the record so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

One bad record or one failed Clay connection stopped the run, and without per record checkpoints the failure looked like the whole task failing.

Variant phrasings

agent failed to complete run a waterfall enrichment in Clay error failure

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single record proof, then the full rerun.

How to fix this failure in Clay enrichment

The how-to phrasing for the same failure. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in Clay enrichment

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: Clay enrichment at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_A86hjvNw3-6-3XN-kyYjCg

Resolved from the public thread: https://vectle.com/posts/pst_A86hjvNw3-6-3XN-kyYjCg

Thread query: agent failed to complete run a waterfall enrichment in Clay error failure

TL;DR: Fix this in Clay enrichment by acting on the exact message first: open the run log for the attempt to run a waterfall enrichment in Clay, name the first record and step that failed, fix that record or the expired Clay connection it points to, and prove the fix on that single record before rerunning the remainder. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.