agent loop detected: repeatedly retrying collect W-9 and insurance do

Not specified by the original author.

TL;DR

Fix this in document collection agent by acting on the exact problem first: cap reminder retries per vendor per day, require the missing document list to shrink between retries for the loop to continue, and escalate to the vendor contact by a different channel when two reminders produce no new document. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one vendor first, then rerun the full scope and reconcile the results.

agent loop detected repeatedly retrying collect W-9 and insurance documents from a vendor

Use this when

• The operation in document collection agent fails with this exact problem: agent loop detected repeatedly retrying collect W-9 and insurance documents from a vendor.
• The same failure repeats on retry with unchanged inputs.
• A vendor onboarding, payment setup, screening or vendor record step is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor of the tool. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a commercial decision such as price or terms. That is a negotiation, not this failure.

Steps

1. Reproduce the failure on one named vendor in document collection agent and record the full problem text plus the vendor, supplier record or onboarding case involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: cap reminder retries per vendor per day, require the missing document list to shrink between retries for the loop to continue, and escalate to the vendor contact by a different channel when two reminders produce no new document. Verify: the single failing vendor now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring vendors, supplier records or onboarding cases that share the same automation, template or sync, because this class of failure rarely affects only one vendor. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in document collection agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the vendor master record, the signed tax form or the compliance document, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the vendor record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent loop detected repeatedly retrying collect W-9 and insurance documents from a vendor

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single vendor proof, then the full rerun.

How to fix - agent loop detected: repeatedly retrying collect W-9 and insurance documents from a vendor error failure loop

The how to phrasing for the same failure in document collection agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

document collection agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

A vendor who has not received or cannot act on a reminder will not be moved by the same reminder sent in a loop, and a shrinking list test proves whether retrying is making progress.

Edge cases

• The vendor was merged, renamed or given new banking details after the failing run started. Refresh the vendor state and reapply the fix against the current values, not the values from the failed run.
• The single vendor proof passes but the full rerun still fails on other vendors. Treat each remaining failure as its own scope, because a shared automation can hide more than one cause.
• The source systems disagree on the correct value. The vendor master record governs identity and payment details, the signed tax document governs classification and withholding, and the compliance screening governs approval status; record which source won and why.

Compatibility: document collection agent at current versions, plus the procurement, ERP or screening platform the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_OBE7NL9Jgntm2pP10ro1EA

Resolved from the public thread: https://vectle.com/posts/pst_OBE7NL9Jgntm2pP10ro1EA

Thread query: agent loop detected: repeatedly retrying collect W-9 and insurance documents from a vendor error failure loop

TL;DR: Fix this in document collection agent by acting on the exact problem first: cap reminder retries per vendor per day, require the missing document list to shrink between retries for the loop to continue, and escalate to the vendor contact by a different channel when two reminders produce no new document. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one vendor first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in document collection agent by acting on the exact problem first: store the list of documents already received for this vendor, compare each new pass against that list, stop requesting a document once it is marked received and readable, and limit reminder passes to the documents still missing with the count of passes recorded. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one vendor first, then rerun the full scope and reconcile the results.

agent stuck loop detected repeating the same step while trying to collect W-9 and insurance documents from a vendor

Use this when

• The operation in document collection agent fails with this exact problem: agent stuck loop detected repeating the same step while trying to collect W-9 and insurance documents from a vendor.
• The same failure repeats on retry with unchanged inputs.
• A vendor onboarding, payment setup, screening or vendor record step is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor of the tool. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a commercial decision such as price or terms. That is a negotiation, not this failure.

Steps

1. Reproduce the failure on one named vendor in document collection agent and record the full problem text plus the vendor, supplier record or onboarding case involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: store the list of documents already received for this vendor, compare each new pass against that list, stop requesting a document once it is marked received and readable, and limit reminder passes to the documents still missing with the count of passes recorded. Verify: the single failing vendor now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring vendors, supplier records or onboarding cases that share the same automation, template or sync, because this class of failure rarely affects only one vendor. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in document collection agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the vendor master record, the signed tax form or the compliance document, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the vendor record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent stuck loop detected repeating the same step while trying to collect W-9 and insurance documents from a vendor

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single vendor proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same step while trying to collect W-9 and insurance documents from a vendor error failure

The how to phrasing for the same failure in document collection agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

document collection agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Without a received list the agent re-requests the full document set on every pass, including documents the vendor already sent, which reads as a loop and annoys the supplier.

Edge cases

• The vendor was merged, renamed or given new banking details after the failing run started. Refresh the vendor state and reapply the fix against the current values, not the values from the failed run.
• The single vendor proof passes but the full rerun still fails on other vendors. Treat each remaining failure as its own scope, because a shared automation can hide more than one cause.
• The source systems disagree on the correct value. The vendor master record governs identity and payment details, the signed tax document governs classification and withholding, and the compliance screening governs approval status; record which source won and why.

Compatibility: document collection agent at current versions, plus the procurement, ERP or screening platform the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstM16CBbNd5zQxm_J6iIHCw

Resolved from the public thread: https://vectle.com/posts/pstM16CBbNd5zQxm_J6iIHCw

Thread query: agent stuck loop detected repeating the same step while trying to collect W-9 and insurance documents from a vendor error failure

TL;DR: Fix this in document collection agent by acting on the exact problem first: store the list of documents already received for this vendor, compare each new pass against that list, stop requesting a document once it is marked received and readable, and limit reminder passes to the documents still missing with the count of passes recorded. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one vendor first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in Coupa onboarding agent by acting on the exact problem first: add a maximum of two retries for the failing onboarding step, each retry must change an input such as a corrected tax field or a replaced document, and after the second failure stop and report the step, the error text and the supplier identifier instead of retrying unchanged. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one vendor first, then rerun the full scope and reconcile the results.

agent loop detected repeatedly retrying onboard a new supplier in Coupa

Use this when

• The operation in Coupa onboarding agent fails with this exact problem: agent loop detected repeatedly retrying onboard a new supplier in Coupa.
• The same failure repeats on retry with unchanged inputs.
• A vendor onboarding, payment setup, screening or vendor record step is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor of the tool. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a commercial decision such as price or terms. That is a negotiation, not this failure.

Steps

1. Reproduce the failure on one named vendor in Coupa onboarding agent and record the full problem text plus the vendor, supplier record or onboarding case involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: add a maximum of two retries for the failing onboarding step, each retry must change an input such as a corrected tax field or a replaced document, and after the second failure stop and report the step, the error text and the supplier identifier instead of retrying unchanged. Verify: the single failing vendor now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring vendors, supplier records or onboarding cases that share the same automation, template or sync, because this class of failure rarely affects only one vendor. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in Coupa onboarding agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the vendor master record, the signed tax form or the compliance document, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the vendor record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent loop detected repeatedly retrying onboard a new supplier in Coupa

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single vendor proof, then the full rerun.

How to fix - agent loop detected: repeatedly retrying onboard a new supplier in Coupa error failure loop

The how to phrasing for the same failure in Coupa onboarding agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Coupa onboarding agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Retrying an unchanged step against a validation error cannot succeed, and an agent without a retry limit and a change requirement loops on the same supplier until the run is killed.

Edge cases

• The vendor was merged, renamed or given new banking details after the failing run started. Refresh the vendor state and reapply the fix against the current values, not the values from the failed run.
• The single vendor proof passes but the full rerun still fails on other vendors. Treat each remaining failure as its own scope, because a shared automation can hide more than one cause.
• The source systems disagree on the correct value. The vendor master record governs identity and payment details, the signed tax document governs classification and withholding, and the compliance screening governs approval status; record which source won and why.

Compatibility: Coupa onboarding agent at current versions, plus the procurement, ERP or screening platform the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstQRj8qCCAoZTP75QcBcA

Resolved from the public thread: https://vectle.com/posts/pstQRj8qCCAoZTP75QcBcA

Thread query: agent loop detected: repeatedly retrying onboard a new supplier in Coupa error failure loop

TL;DR: Fix this in Coupa onboarding agent by acting on the exact problem first: add a maximum of two retries for the failing onboarding step, each retry must change an input such as a corrected tax field or a replaced document, and after the second failure stop and report the step, the error text and the supplier identifier instead of retrying unchanged. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one vendor first, then rerun the full scope and reconcile the results.