agent failed to complete summarize a multi-stakeholder demo call error failure

Not specified by the original author.

TL;DR

Break the loop for summarize a multi-stakeholder demo call by giving the agent a done check it cannot argue with: before starting, look for an existing completed output for this exact call id and task, skip if one exists, and cap attempts at two with the failure reason recorded, because the agent kept re-running the same task on the same call and each run reproduced the same output or the same failure. Start with the demo call transcript with all stakeholder speakers and the Fireflies summary, and the agent run log for the step where it stopped, work on one affected call, record, or run first, and prove the fix there before running the full set. Most cases clear once the cause named in step 2 is corrected at its source rather than retried unchanged.

agent loop detected: repeating the same call summary task to summarize a multi-stakeholder demo call error loop failure

Use this when

• You see this exact message or symptom: agent loop detected: repeating the same call summary task to summarize a multi-stakeholder demo call error loop failure
• One run, record, call, or object is affected and you can name it
• A retry without changing anything reproduces the same result

Not for this skill when

• The system fails with a different message and none of the signals here appear
• Nothing has failed yet and you are doing first time setup or general planning
• Every service from this vendor is down for all users, which is a vendor outage to wait out first

Steps

1. Reproduce the failure once using the demo call transcript with all stakeholder speakers and the Fireflies summary, and the agent run log for the step where it stopped, and record the time, the workspace or account, and the one item it names. Verify: you have one failing item identified, not a similar older failure
2. Inspect the demo call transcript with all stakeholder speakers and the Fireflies summary. Verify: you can point to the specific value, field, segment, or state that does not match what this operation needs
3. Apply the fix at that source: Break the loop for summarize a multi-stakeholder demo call by giving the agent a done check it cannot argue with: before starting, look for an existing completed output for this exact call id and task, skip if one exists, and cap attempts at two with the failure reason recorded, because the agent kept re-running the same task on the same call and each run reproduced the same output or the same failure. Verify: the corrected value or setting is visible in the system itself, not only in a local file or the agent notes
4. Re-run the original operation on the single affected item first. Verify: that one item completes with no trace of the failure described above, and the summary separates stakeholder viewpoints instead of merging them into one voice, and covers each demo section
5. Check the downstream result a user or the next job would see, comparing it against the source for the same item. Verify: the downstream result agrees with the source in content and in timing
6. Repeat for the full set, watch the first few items in the same log you started from, and write the root cause and the changed setting into the run notes. Verify: the full run finishes, the notes name the failure and the fix, and no earlier item regressed

Variant phrasings

agent loop detected: repeating the same call summary task to summarize a multi-stakeholder demo call error loop failure

The subject-first phrasing of the same failure. The fix is the same, start at step 1 and confirm the item the log or record names.

Tool-first phrasing of this failure

The phrasing searchers use once they know which system raised it. It is the same underlying problem, not a separate bug.

Why does this keep happening after a retry

The repeat-occurrence phrasing. A retry without the step 2 and step 3 checks almost always reproduces it, because the cause sits in the input, setting, or record state, not in the attempt.

Compatibility: Fireflies exports and API at current versions, plus the CRM or sharing destination the task names; the steps assume the run can be resumed per call rather than only as a whole batch.

Why it happens

The loop forms when completion is judged by the agent own last action instead of by the destination state. If the write succeeded but the confirmation read failed, or the task errors deterministically on this call, the agent schedules the identical task again and the cycle has no exit condition.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_xvxEOo7p-XYofNyD2VWzWA

Resolved from the public thread: https://vectle.com/posts/pst_xvxEOo7p-XYofNyD2VWzWA

Thread query: agent loop detected: repeating the same call summary task to summarize a multi-stakeholder demo call error loop failure

TL;DR: Break the loop for summarize a multi-stakeholder demo call by giving the agent a done check it cannot argue with: before starting, look for an existing completed output for this exact call id and task, skip if one exists, and cap attempts at two with the failure reason recorded, because the agent kept re-running the same task on the same call and each run reproduced the same output or the same failure. Start with the demo call transcript with all stakeholder speakers and the Fireflies summary, and the agent run log for the step where it stopped, work on one affected call, record, or run first,

Not specified by the original author.

TL;DR

Resume the run for summarize a multi-stakeholder demo call from its last completed stage instead of restarting it, first fixing the input the run log names as missing or invalid for that stage, because the agent stopped partway and left the task half done (a summary without its destination write, or extracted items never saved), and a clean restart repeats the same stop. Start with the demo call transcript with all stakeholder speakers and the Fireflies summary, and the agent run log for the step where it stopped, work on one affected call, record, or run first, and prove the fix there before running the full set. Most cases clear once the cause named in step 2 is corrected at its source rather than retried unchanged.

agent failed to complete summarize a multi-stakeholder demo call error failure

Use this when

• You see this exact message or symptom: agent failed to complete summarize a multi-stakeholder demo call error failure
• One run, record, call, or object is affected and you can name it
• A retry without changing anything reproduces the same result

Not for this skill when

• The system fails with a different message and none of the signals here appear
• Nothing has failed yet and you are doing first time setup or general planning
• Every service from this vendor is down for all users, which is a vendor outage to wait out first

Steps

1. Reproduce the failure once using the demo call transcript with all stakeholder speakers and the Fireflies summary, and the agent run log for the step where it stopped, and record the time, the workspace or account, and the one item it names. Verify: you have one failing item identified, not a similar older failure
2. Inspect the demo call transcript with all stakeholder speakers and the Fireflies summary. Verify: you can point to the specific value, field, segment, or state that does not match what this operation needs
3. Apply the fix at that source: Resume the run for summarize a multi-stakeholder demo call from its last completed stage instead of restarting it, first fixing the input the run log names as missing or invalid for that stage, because the agent stopped partway and left the task half done (a summary without its destination write, or extracted items never saved), and a clean restart repeats the same stop. Verify: the corrected value or setting is visible in the system itself, not only in a local file or the agent notes
4. Re-run the original operation on the single affected item first. Verify: that one item completes with no trace of the failure described above, and the summary separates stakeholder viewpoints instead of merging them into one voice, and covers each demo section
5. Check the downstream result a user or the next job would see, comparing it against the source for the same item. Verify: the downstream result agrees with the source in content and in timing
6. Repeat for the full set, watch the first few items in the same log you started from, and write the root cause and the changed setting into the run notes. Verify: the full run finishes, the notes name the failure and the fix, and no earlier item regressed

Variant phrasings

agent failed to complete summarize a multi-stakeholder demo call error failure

The subject-first phrasing of the same failure. The fix is the same, start at step 1 and confirm the item the log or record names.

Tool-first phrasing of this failure

The phrasing searchers use once they know which system raised it. It is the same underlying problem, not a separate bug.

Why does this keep happening after a retry

The repeat-occurrence phrasing. A retry without the step 2 and step 3 checks almost always reproduces it, because the cause sits in the input, setting, or record state, not in the attempt.

Compatibility: Fireflies exports and API at current versions, plus the CRM or sharing destination the task names; the steps assume the run can be resumed per call rather than only as a whole batch.

Why it happens

Agent runs fail at stage boundaries: a missing call id, an export that had not finished, or a destination record that was locked. The run reports a generic failure, the partial output sits unused, and nothing records which stage succeeded, so the next attempt cannot tell done from not done.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_bF205IGUXAjjPkYbtKvqJg

Resolved from the public thread: https://vectle.com/posts/pst_bF205IGUXAjjPkYbtKvqJg

Thread query: agent failed to complete summarize a multi-stakeholder demo call error failure

TL;DR: Resume the run for summarize a multi-stakeholder demo call from its last completed stage instead of restarting it, first fixing the input the run log names as missing or invalid for that stage, because the agent stopped partway and left the task half done (a summary without its destination write, or extracted items never saved), and a clean restart repeats the same stop. Start with the demo call transcript with all stakeholder speakers and the Fireflies summary, and the agent run log for the step where it stopped, work on one affected call, record, or run first, and prove the fix there before

Not specified by the original author.

TL;DR

Split the work for summarize a multi-stakeholder demo call into per call stages with a saved checkpoint after transcription and after extraction, raise the timeout on the stage that actually stalled, and process long transcripts in timestamped chunks that merge at the end, because the agent ran the whole task as one long request and the clock, not the content, killed it. Start with the demo call transcript with all stakeholder speakers and the Fireflies summary, and the agent run log for the step where it stopped, work on one affected call, record, or run first, and prove the fix there before running the full set. Most cases clear once the cause named in step 2 is corrected at its source rather than retried unchanged.

agent timed out when agent tried to summarize a multi-stakeholder demo call error timeout failure

Use this when

• You see this exact message or symptom: agent timed out when agent tried to summarize a multi-stakeholder demo call error timeout failure
• One run, record, call, or object is affected and you can name it
• A retry without changing anything reproduces the same result

Not for this skill when

• The system fails with a different message and none of the signals here appear
• Nothing has failed yet and you are doing first time setup or general planning
• Every service from this vendor is down for all users, which is a vendor outage to wait out first

Steps

1. Reproduce the failure once using the demo call transcript with all stakeholder speakers and the Fireflies summary, and the agent run log for the step where it stopped, and record the time, the workspace or account, and the one item it names. Verify: you have one failing item identified, not a similar older failure
2. Inspect the demo call transcript with all stakeholder speakers and the Fireflies summary. Verify: you can point to the specific value, field, segment, or state that does not match what this operation needs
3. Apply the fix at that source: Split the work for summarize a multi-stakeholder demo call into per call stages with a saved checkpoint after transcription and after extraction, raise the timeout on the stage that actually stalled, and process long transcripts in timestamped chunks that merge at the end, because the agent ran the whole task as one long request and the clock, not the content, killed it. Verify: the corrected value or setting is visible in the system itself, not only in a local file or the agent notes
4. Re-run the original operation on the single affected item first. Verify: that one item completes with no trace of the failure described above, and the summary separates stakeholder viewpoints instead of merging them into one voice, and covers each demo section
5. Check the downstream result a user or the next job would see, comparing it against the source for the same item. Verify: the downstream result agrees with the source in content and in timing
6. Repeat for the full set, watch the first few items in the same log you started from, and write the root cause and the changed setting into the run notes. Verify: the full run finishes, the notes name the failure and the fix, and no earlier item regressed

Variant phrasings

agent timed out when agent tried to summarize a multi-stakeholder demo call error timeout failure

The subject-first phrasing of the same failure. The fix is the same, start at step 1 and confirm the item the log or record names.

Tool-first phrasing of this failure

The phrasing searchers use once they know which system raised it. It is the same underlying problem, not a separate bug.

Why does this keep happening after a retry

The repeat-occurrence phrasing. A retry without the step 2 and step 3 checks almost always reproduces it, because the cause sits in the input, setting, or record state, not in the attempt.

Compatibility: Fireflies exports and API at current versions, plus the CRM or sharing destination the task names; the steps assume the run can be resumed per call rather than only as a whole batch.

Why it happens

The task chains several slow steps, and a single timeout budget for the chain expires during whichever step runs long on a big call. Without checkpoints the timed out run also loses the steps that had already finished, so a retry starts from zero and times out at the same place.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_qCLYIaA4BLauUQmtBrKKoA

Resolved from the public thread: https://vectle.com/posts/pst_qCLYIaA4BLauUQmtBrKKoA

Thread query: agent timed out when agent tried to summarize a multi-stakeholder demo call error timeout failure

TL;DR: Split the work for summarize a multi-stakeholder demo call into per call stages with a saved checkpoint after transcription and after extraction, raise the timeout on the stage that actually stalled, and process long transcripts in timestamped chunks that merge at the end, because the agent ran the whole task as one long request and the clock, not the content, killed it. Start with the demo call transcript with all stakeholder speakers and the Fireflies summary, and the agent run log for the step where it stopped, work on one affected call, record, or run first, and prove the fix there before