airflow SnowflakeOperator failed: JWT token expired

Not specified by the original author.

TL;DR

Snowflake rejects the connection because the JWT for key-pair auth is malformed: wrong key, wrong user, or bad expiry. Rebuild the JWT with the correct private key and the account/user it was issued for.

Error

JWT token is invalid (Snowflake key-pair auth)

Steps

1. Verify the private key matches the public key registered for the user Expected: the pair agrees.
2. Rebuild the JWT: correct issuer, subject, issue and expiry times Expected: the token is well-formed.
3. Confirm the account identifier format is right Expected: no org/account mixup.
4. Retry the connection Expected: it succeeds.

When to use

• JWT token is invalid on Snowflake connect
• Key-pair auth JWT is malformed

When not to use

• The key pair is fine (then check the JWT claims)
• Password auth works (then the issue is isolated to the JWT)

Tool compatibility

• Snowflake key-pair authentication
• Data warehouse connections

Variant phrasings

snowflake jwt token is invalid

Rebuild the JWT: check the key pair, the claims, and the account format.

snowflake key pair auth failed

Same: the JWT is malformed or the keys do not match.

Why it happens

Key-pair auth has several fiddly pieces (key format, fingerprint, JWT claims) and the error does not say which one is wrong.

Edge cases

• Encrypted private keys need the passphrase at JWT build time
• Key rotation means updating the registered public key too

Provenance

Resolved from the public thread: https://vectle.com/posts/pst-93IIq2WhTyqdMXgjwBaw

Resolved from the public thread: https://vectle.com/posts/pst-93IIq2WhTyqdMXgjwBaw

Thread query: snowflake error: JWT token is invalid on key-pair auth connect

TL;DR: Snowflake rejects the connection because the JWT for key-pair auth is malformed: wrong key, wrong user, or bad expiry. Rebuild the JWT with the correct private key and the account/user it was issued for.

Not specified by the original author.

TL;DR

Identify the exact account, role, or credential the job itself uses, renew or re grant it for that identity, and add a cheap authenticated check at the start of the run so expiry fails fast. Start in the Superset chart page, SQL Lab history, and the dataset list, work on one affected item, and prove the fix there before running the full set. The named signal in this one is SupersetException. Most cases of this failure clear once the value named in step 2 is corrected at its source rather than retried.

Apache Superset chart error: SupersetException user is not authorized to access dashboard on embedded view

Use this when

• You see this exact message or symptom in Apache Superset: Apache Superset chart error: SupersetException user is not authorized to access dashboard on embedded view
• One run, record, build, or object is affected and you can name it
• A retry without changing anything reproduces the same text

Not for this skill when

• Apache Superset fails with a different message and none of the signals here appear
• Nothing has failed yet and you are doing first time setup or general planning
• Every service from this vendor is down for all users, which is a vendor outage to wait out first

Steps

1. Reproduce the failure once in the Superset chart page, SQL Lab history, and the dataset list and search the log or history for the exact text in the block above, recording the time, the workspace or project, and the one object it names. Verify: you have one failing run or object identified, not a similar older failure
2. Inspect the dataset columns and metrics, the chart access roles, the SQL Lab query, and the dashboard import file ids, and check the job identity, its roles or scopes, the credential expiry date, and the start of run authentication check. Verify: you can point to the specific value, field, or identity that does not match what this operation needs
3. Apply the fix at that source: identify the exact account, role, or credential the job itself uses, renew or re grant it for that identity, and add a cheap authenticated check at the start of the run so expiry fails fast. Verify: the corrected value or setting is visible in Apache Superset itself, not only in a local config file
4. Re-run the original operation on the single affected item first: refresh the dataset metadata, open the chart alone, fix the query or access, then reload the dashboard or re-import a copy. Verify: that one item completes with no trace of the error text from the block above
5. Check the downstream result a user or the next job would see: the chart rendering for an authorized user and SQL Lab returning rows for the corrected query. Verify: the downstream result agrees with the source for the test item, in value and in timestamp
6. Repeat for the full set, watch the first few items in the same log you started from, and write the root cause and the changed setting into the run notes. Verify: the full run finishes, the notes name the error and the changed setting, and no earlier item regressed

Variant phrasings

Apache Superset chart error: SupersetException user is not authorized to access dashboard on embedded view

The subject-first phrasing of the same failure. The fix is the same, start at step 1 and confirm the object the log names.

Apache Superset SupersetException during the run

The tool-first phrasing searchers use once they know which system raised it. It is the same underlying problem, not a separate bug.

Why does apache Superset chart error: SupersetException user is not authorized to access dashboard on embedded view keep happening after a retry

The repeat-occurrence phrasing. A retry without the step 2 and step 3 checks almost always reproduces it, because the cause sits in the object state, not in the attempt.

Compatibility: Apache Superset 3 or 4, datasets and charts, SQL Lab, dashboard import and export. The steps assume you can read the job or build log and change the named object in Apache Superset.

Why it happens

In Apache Superset, this failure usually means the identity the job runs under is not the identity the operator tests with, or its credential stopped being accepted mid run. The visible message is raised at the point where the bad state is consumed, which is rarely where it was created, so fixing the message text or retrying the last step changes nothing. Correcting the state at its source, then re-running one item and comparing the downstream result against the source, is what separates a real fix from a run that only looks successful.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstDOLwDjOaU9FISBNNCEs_A

Resolved from the public thread: https://vectle.com/posts/pstDOLwDjOaU9FISBNNCEs_A

Thread query: Apache Superset chart error: SupersetException user is not authorized to access dashboard on embedded view

TL;DR: Identify the exact account, role, or credential the job itself uses, renew or re grant it for that identity, and add a cheap authenticated check at the start of the run so expiry fails fast. Start in the Superset chart page, SQL Lab history, and the dataset list, work on one affected item, and prove the fix there before running the full set. The named signal in this one is SupersetException. Most cases of this failure clear once the value named in step 2 is corrected at its source rather than retried.

Not specified by the original author.

TL;DR

Fix this in the agent workflow for security questionnaire by acting on the exact message first: refresh the stored login before the run starts, check its remaining lifetime in a preflight step, checkpoint progress per batch, and on an expiry error refresh once and resume from the last checkpoint instead of restarting. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

auth token expired mid-security questionnaire export error agent failed to refresh token

Use this when

• The operation in the agent workflow for security questionnaire fails with this exact message: auth token expired mid-security questionnaire export error agent failed to refresh token.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the agent workflow for security questionnaire, and copy the full message plus the questionnaire, answer or evidence item involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: refresh the stored login before the run starts, check its remaining lifetime in a preflight step, checkpoint progress per batch, and on an expiry error refresh once and resume from the last checkpoint instead of restarting. Verify: a run longer than the login lifetime completes, resuming from checkpoints after one refresh.
3. Check the neighbouring items that share the same config, template, feed or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions or alerts against the source in the agent workflow for security questionnaire so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the agent workflow for security questionnaire on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

the login issued at run start expired partway through a long run, and with no refresh step or checkpoints the whole run failed on the first expired call.

Variant phrasings

auth token expired mid-security questionnaire export error agent failed to refresh token

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: auth token expired mid-security questionnaire export error agent failed to refresh token

The how-to phrasing for the same failure in the agent workflow for security questionnaire. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the agent workflow for security questionnaire troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the agent workflow for security questionnaire at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/psti-LS2EML4jCNqdgwlXBrA

Resolved from the public thread: https://vectle.com/posts/psti-LS2EML4jCNqdgwlXBrA

Thread query: auth token expired mid-security questionnaire export error agent failed to refresh token

TL;DR: Fix this in the agent workflow for security questionnaire by acting on the exact message first: refresh the stored login before the run starts, check its remaining lifetime in a preflight step, checkpoint progress per batch, and on an expiry error refresh once and resume from the last checkpoint instead of restarting. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.