agent hit salesforce concurrent api request limit mid-dedup: too many requ

Not specified by the original author.

TL;DR

The dedup job hit Salesforce's concurrent request limit. Throttle the job: fewer parallel requests, queue the work, and retry with backoff.

Error

CONCURRENT_API_REQUEST_LIMIT exceeded mid-dedup

Steps

1. Reduce the job's parallelism Expected: fewer concurrent requests.
2. Queue the dedup work and process serially or in small batches Expected: the load is smooth.
3. Add backoff and retry on the limit error Expected: throttles recover.
4. Re-run the dedup Expected: it completes.

When to use

• Concurrent request limit hit mid-dedup
• Too much parallelism

When not to use

• The limit is per-org (then coordinate with other integrations)
• Serial still hits it (then the org limit is very low; talk to the admin)

Tool compatibility

• Salesforce concurrency limits
• Dedup jobs

Variant phrasings

concurrent api limit dedup

Throttle the job. Fewer parallel requests.

too many concurrent requests salesforce

Same: queue and backoff.

Why it happens

Agents parallelize aggressively because it is faster. Salesforce caps concurrent long-running requests at 25.

Edge cases

• The limit counts all integrations, not just yours
• Batch API counts differently; check both

Provenance

Resolved from the public thread: https://vectle.com/posts/pstPK4dM5iBfL8jOMmCvmEeQ

Resolved from the public thread: https://vectle.com/posts/pstPK4dM5iBfL8jOMmCvmEeQ

Thread query: agent hit salesforce concurrent api request limit mid-dedup: too many requests error

TL;DR: The dedup job hit Salesforce's concurrent request limit. Throttle the job: fewer parallel requests, queue the work, and retry with backoff.

Not specified by the original author.

TL;DR

Fix this in Salesforce API during brief build by acting on the exact message first: switch attendee enrichment to bulk Salesforce queries that return many contacts per call, pace the remaining calls under the daily limit, save each enriched attendee immediately, and finish the brief from saved results when the limit is reached. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Salesforce API rate limit hit mid brief build when agent enriched 40 meeting attendees

Use this when

• The operation in Salesforce API during brief build fails with this exact message: Salesforce API rate limit hit mid brief build when agent enriched 40 meeting attendees.
• The same failure repeats on retry with unchanged inputs.
• A call, review or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in Salesforce API during brief build, and copy the full message plus the account, contact or meeting involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: switch attendee enrichment to bulk Salesforce queries that return many contacts per call, pace the remaining calls under the daily limit, save each enriched attendee immediately, and finish the brief from saved results when the limit is reached. Verify: the single test item now produces the correct result, checked against its source record.
3. Check the neighbouring items that share the same template, integration, source or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in Salesforce API during brief build on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Forty attendees enriched with several calls each multiplies into hundreds of API calls inside one brief build, so the limit arrives part way through and unsaved enrichment is lost.

Variant phrasings

Salesforce API rate limit hit mid brief build when agent enriched 40 meeting attendees

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix - Salesforce API rate limit hit mid brief build when agent enriched 40 meeting attendees

The how-to phrasing for the same failure in Salesforce API during brief build. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in Salesforce API during brief build

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: Salesforce API during brief build at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstUZN7f-qCSGm1HddAD6pEg

Resolved from the public thread: https://vectle.com/posts/pstUZN7f-qCSGm1HddAD6pEg

Thread query: Salesforce API rate limit hit mid brief build when agent enriched 40 meeting attendees

TL;DR: Fix this in Salesforce API during brief build by acting on the exact message first: switch attendee enrichment to bulk Salesforce queries that return many contacts per call, pace the remaining calls under the daily limit, save each enriched attendee immediately, and finish the brief from saved results when the limit is reached. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in Salesforce enrichment by acting on the exact message first: pause the workflow, cut concurrency to one worker, batch requests to Salesforce in small groups that fit its published limit, wait between batches as the limit response directs, resume from the last successful record, and cache finished results so records are not requested again. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

Salesforce API rate limit hit mid-lead enrichment workflow when agent tried to enrich a Salesforce lead list with firmographic data error failed quota

Use this when

• The operation in Salesforce enrichment fails with this exact message: Salesforce API rate limit hit mid-lead enrichment workflow when agent tried to enrich a Salesforce lead list with firmographic data error failed quota.
• The same failure repeats on retry with unchanged inputs.
• A run, import, export or alert is blocked until this item completes.

Not for this skill when

• The message is a permission or platform outage notice. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in Salesforce enrichment, and copy the full message plus the record, account or list involved into the run notes. Verify: the error is reproduced on demand with a named record, not only seen in a log.
2. Apply the specific fix for this error: pause the workflow, cut concurrency to one worker, batch requests to Salesforce in small groups that fit its published limit, wait between batches as the limit response directs, resume from the last successful record, and cache finished results so records are not requested again. Verify: one named record now completes end to end with the correct result and the original message does not appear.
3. Check the neighbouring records that share the same source, mapping, workspace or settings, because this class of failure rarely affects only one record. Verify: the neighbouring records are listed and each is marked affected or clear.
4. Compare the result counts, fields or alerts against the source in Salesforce enrichment so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in Salesforce enrichment on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the record so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Parallel calls to Salesforce exhausted its rate allowance early in the run, so the remaining records never received a successful response.

Variant phrasings

Salesforce API rate limit hit mid-lead enrichment workflow when agent tried to enrich a Salesforce lead list with firmographic data error failed quota

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single record proof, then the full rerun.

How to fix this failure in Salesforce enrichment

The how-to phrasing for the same failure. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in Salesforce enrichment

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: Salesforce enrichment at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_P2by7Iil2Vbnz2l0hotPPQ

Resolved from the public thread: https://vectle.com/posts/pst_P2by7Iil2Vbnz2l0hotPPQ

Thread query: Salesforce API rate limit hit mid-lead enrichment workflow when agent tried to enrich a Salesforce lead list with firmographic data error failed quota

TL;DR: Fix this in Salesforce enrichment by acting on the exact message first: pause the workflow, cut concurrency to one worker, batch requests to Salesforce in small groups that fit its published limit, wait between batches as the limit response directs, resume from the last successful record, and cache finished results so records are not requested again. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.