agent timed out when agent tried to verify a new hire I-9 document su

Not specified by the original author.

TL;DR

Fix this in verify I-9 document agent by acting on the exact problem first: narrow the run to one hire at a time within a fixed step budget, check the document list for that hire before opening any document, and deliver each finished verification as it completes so HR holds verified hires even if the run cannot finish the full list. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.

agent timed out when agent tried to verify a new hire I-9 document submission error timeout failure

Use this when

• The operation in verify I-9 document agent fails with this exact problem: agent timed out when agent tried to verify a new hire I-9 document submission error timeout failure.
• The same failure repeats on retry with unchanged inputs.
• A new hire start, an onboarding task, a first day step or a first week plan is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with an HR policy call such as eligibility or a start date decision. That is a people team decision, not this failure.

Steps

1. Reproduce the failure on one named hire or task in verify I-9 document agent and record the full problem text plus the hire, task or start date involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: narrow the run to one hire at a time within a fixed step budget, check the document list for that hire before opening any document, and deliver each finished verification as it completes so HR holds verified hires even if the run cannot finish the full list. Verify: the single failing hire or task now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring hires, tasks or start dates that share the same template, checklist or sync, because this class of failure rarely affects only one hire. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in verify I-9 document agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the HRIS hire record, the signed offer or the current handbook page, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the onboarding log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent timed out when agent tried to verify a new hire I-9 document submission error timeout failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single hire proof, then the full rerun.

How to fix - agent timed out when agent tried to verify a new hire I-9 document submission error timeout failure

The how to phrasing for the same failure in verify I-9 document agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

verify I-9 document agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Opening every hire document before checking any of them spends the budget on retrieval, while one hire completion at a time guarantees progress is recorded even under a hard time limit.

Edge cases

• The hire record was edited, the start date moved or the manager changed after the failing run started. Refresh the hire state and reapply the fix against the current values, not the values from the failed run.
• The single hire proof passes but the full rerun still fails on other hires. Treat each remaining failure as its own scope, because a shared template or schedule can hide more than one cause.
• The source systems disagree on the correct value. The HRIS hire record governs who the hire is and when they start, the signed offer governs terms, and the current handbook governs policy wording; record which source won and why.

Compatibility: verify I-9 document agent at current versions, plus the HRIS, handbook or onboarding tool the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_PMLiSrVy7l6Jh6oRoyxdBQ

Resolved from the public thread: https://vectle.com/posts/pst_PMLiSrVy7l6Jh6oRoyxdBQ

Thread query: agent timed out when agent tried to verify a new hire I-9 document submission error timeout failure

TL;DR: Fix this in verify I-9 document agent by acting on the exact problem first: narrow the run to one hire at a time within a fixed step budget, check the document list for that hire before opening any document, and deliver each finished verification as it completes so HR holds verified hires even if the run cannot finish the full list. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in verify I-9 document agent by acting on the exact problem first: record each verification step already completed in a run file, check that file before starting a step again, break out after a repeated step, and report the completed steps with their evidence instead of repeating the same document review in a circle. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.

agent stuck loop detected repeating the same step while trying to verify a new hire I-9 document submission error failure

Use this when

• The operation in verify I-9 document agent fails with this exact problem: agent stuck loop detected repeating the same step while trying to verify a new hire I-9 document submission error failure.
• The same failure repeats on retry with unchanged inputs.
• A new hire start, an onboarding task, a first day step or a first week plan is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with an HR policy call such as eligibility or a start date decision. That is a people team decision, not this failure.

Steps

1. Reproduce the failure on one named hire or task in verify I-9 document agent and record the full problem text plus the hire, task or start date involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: record each verification step already completed in a run file, check that file before starting a step again, break out after a repeated step, and report the completed steps with their evidence instead of repeating the same document review in a circle. Verify: the single failing hire or task now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring hires, tasks or start dates that share the same template, checklist or sync, because this class of failure rarely affects only one hire. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in verify I-9 document agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the HRIS hire record, the signed offer or the current handbook page, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the onboarding log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent stuck loop detected repeating the same step while trying to verify a new hire I-9 document submission error failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single hire proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same step while trying to verify a new hire I-9 document submission error failure

The how to phrasing for the same failure in verify I-9 document agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

verify I-9 document agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

The agent loops because its completion check reads a status that updates after the check itself runs, so a finished verification step looks unfinished forever until completion is recorded where the check reads.

Edge cases

• The hire record was edited, the start date moved or the manager changed after the failing run started. Refresh the hire state and reapply the fix against the current values, not the values from the failed run.
• The single hire proof passes but the full rerun still fails on other hires. Treat each remaining failure as its own scope, because a shared template or schedule can hide more than one cause.
• The source systems disagree on the correct value. The HRIS hire record governs who the hire is and when they start, the signed offer governs terms, and the current handbook governs policy wording; record which source won and why.

Compatibility: verify I-9 document agent at current versions, plus the HRIS, handbook or onboarding tool the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_Y51uhDmShhs6NNfQ-JWyuw

Resolved from the public thread: https://vectle.com/posts/pst_Y51uhDmShhs6NNfQ-JWyuw

Thread query: agent stuck loop detected repeating the same step while trying to verify a new hire I-9 document submission error failure

TL;DR: Fix this in verify I-9 document agent by acting on the exact problem first: record each verification step already completed in a run file, check that file before starting a step again, break out after a repeated step, and report the completed steps with their evidence instead of repeating the same document review in a circle. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in verify I-9 document agent by acting on the exact problem first: cap retries per hire verification at a small fixed number, record each attempt with its failure reason, mark a hire whose verification fails the same way twice as blocked with that reason for HR to inspect, and continue with the remaining hires instead of retrying one hire until the run ends. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.

agent loop detected: repeatedly retrying verify a new hire I-9 document submission error failure loop

Use this when

• The operation in verify I-9 document agent fails with this exact problem: agent loop detected: repeatedly retrying verify a new hire I-9 document submission error failure loop.
• The same failure repeats on retry with unchanged inputs.
• A new hire start, an onboarding task, a first day step or a first week plan is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with an HR policy call such as eligibility or a start date decision. That is a people team decision, not this failure.

Steps

1. Reproduce the failure on one named hire or task in verify I-9 document agent and record the full problem text plus the hire, task or start date involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: cap retries per hire verification at a small fixed number, record each attempt with its failure reason, mark a hire whose verification fails the same way twice as blocked with that reason for HR to inspect, and continue with the remaining hires instead of retrying one hire until the run ends. Verify: the single failing hire or task now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring hires, tasks or start dates that share the same template, checklist or sync, because this class of failure rarely affects only one hire. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in verify I-9 document agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the HRIS hire record, the signed offer or the current handbook page, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the onboarding log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent loop detected: repeatedly retrying verify a new hire I-9 document submission error failure loop

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single hire proof, then the full rerun.

How to fix - agent loop detected: repeatedly retrying verify a new hire I-9 document submission error failure loop

The how to phrasing for the same failure in verify I-9 document agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

verify I-9 document agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

A single unresolvable hire, an illegible scan or a missing document, absorbs the whole run under uncapped retries, while a recorded block finishes the cohort and hands HR one clear exception.

Edge cases

• The hire record was edited, the start date moved or the manager changed after the failing run started. Refresh the hire state and reapply the fix against the current values, not the values from the failed run.
• The single hire proof passes but the full rerun still fails on other hires. Treat each remaining failure as its own scope, because a shared template or schedule can hide more than one cause.
• The source systems disagree on the correct value. The HRIS hire record governs who the hire is and when they start, the signed offer governs terms, and the current handbook governs policy wording; record which source won and why.

Compatibility: verify I-9 document agent at current versions, plus the HRIS, handbook or onboarding tool the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_5FhhcxusZCa7CWR2BW3Y2g

Resolved from the public thread: https://vectle.com/posts/pst_5FhhcxusZCa7CWR2BW3Y2g

Thread query: agent loop detected: repeatedly retrying verify a new hire I-9 document submission error failure loop

TL;DR: Fix this in verify I-9 document agent by acting on the exact problem first: cap retries per hire verification at a small fixed number, record each attempt with its failure reason, mark a hire whose verification fails the same way twice as blocked with that reason for HR to inspect, and continue with the remaining hires instead of retrying one hire until the run ends. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.