agent failed to complete refresh proposal pricing after a product change err

Not specified by the original author.

TL;DR

Fix this in the proposal generator by acting on the exact message first: validate every input for the task, refresh proposal pricing after a product change, before starting, account or opportunity resolved, sources reachable, required fields present, then checkpoint after each stage and retry only the failed stage with its underlying error surfaced in the run log instead of a generic failure. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Agent failed to complete refresh proposal pricing after a product change error

Use this when

• The operation in the proposal generator fails with this exact message: Agent failed to complete refresh proposal pricing after a product change error.
• The same failure repeats on retry with unchanged inputs.
• A call, review or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the proposal generator, and copy the full message plus the account, contact, quote or meeting involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: validate every input for the task, refresh proposal pricing after a product change, before starting, account or opportunity resolved, sources reachable, required fields present, then checkpoint after each stage and retry only the failed stage with its underlying error surfaced in the run log instead of a generic failure. Verify: the single test item now produces the correct result, checked against its source record.
3. Check the neighbouring items that share the same template, integration, pricebook, source or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in the proposal generator on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

One stage inside refresh proposal pricing after a product change failed partway and the agent had no checkpoints or input validation, so the whole task was reported failed with no way to resume or see which stage broke.

Variant phrasings

Agent failed to complete refresh proposal pricing after a product change error

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent failed to complete refresh proposal pricing after a product change error failure

The how-to phrasing for the same failure in the proposal generator. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the proposal generator

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the proposal generator at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_Q4DTcdngmExXYhqJPN47zg

Resolved from the public thread: https://vectle.com/posts/pst_Q4DTcdngmExXYhqJPN47zg

Thread query: agent failed to complete refresh proposal pricing after a product change error failure

TL;DR: Fix this in the proposal generator by acting on the exact message first: validate every input for the task, refresh proposal pricing after a product change, before starting, account or opportunity resolved, sources reachable, required fields present, then checkpoint after each stage and retry only the failed stage with its underlying error surfaced in the run log instead of a generic failure. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the proposal generator by acting on the exact message first: split the task, refresh proposal pricing after a product change, into staged subcalls with a deadline per stage, cache each finished stage result under the meeting or deal ID, shrink the largest single fetch in the slowest stage by paging it, and on a timeout resume from the last cached stage instead of restarting the whole task. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Agent timed out when agent tried to refresh proposal pricing after a product change error timeout

Use this when

• The operation in the proposal generator fails with this exact message: Agent timed out when agent tried to refresh proposal pricing after a product change error timeout.
• The same failure repeats on retry with unchanged inputs.
• A call, review or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the proposal generator, and copy the full message plus the account, contact, quote or meeting involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: split the task, refresh proposal pricing after a product change, into staged subcalls with a deadline per stage, cache each finished stage result under the meeting or deal ID, shrink the largest single fetch in the slowest stage by paging it, and on a timeout resume from the last cached stage instead of restarting the whole task. Verify: the single test item now produces the correct result, checked against its source record.
3. Check the neighbouring items that share the same template, integration, pricebook, source or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in the proposal generator on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The agent ran refresh proposal pricing after a product change as one long unbroken call chain, so a single slow source consumed the entire time budget and all completed work was lost when the limit hit.

Variant phrasings

Agent timed out when agent tried to refresh proposal pricing after a product change error timeout

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent timed out when agent tried to refresh proposal pricing after a product change error timeout failure

The how-to phrasing for the same failure in the proposal generator. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the proposal generator

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the proposal generator at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_n1ZMzKG8ApVMOR8ErAWWMw

Resolved from the public thread: https://vectle.com/posts/pst_n1ZMzKG8ApVMOR8ErAWWMw

Thread query: agent timed out when agent tried to refresh proposal pricing after a product change error timeout failure

TL;DR: Fix this in the proposal generator by acting on the exact message first: split the task, refresh proposal pricing after a product change, into staged subcalls with a deadline per stage, cache each finished stage result under the meeting or deal ID, shrink the largest single fetch in the slowest stage by paging it, and on a timeout resume from the last cached stage instead of restarting the whole task. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the proposal generator by acting on the exact message first: fingerprint every attempt at the task, refresh proposal pricing after a product change, from its inputs plus its last result, stop after two identical fingerprints, and change one thing before retrying, a different source, a narrower query or a human check, recording the repeated action in the run log so the loop is visible. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Agent loop detected: repeating the same proposal task to refresh proposal pricing after a product change error loop

Use this when

• The operation in the proposal generator fails with this exact message: Agent loop detected: repeating the same proposal task to refresh proposal pricing after a product change error loop.
• The same failure repeats on retry with unchanged inputs.
• A call, review or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the proposal generator, and copy the full message plus the account, contact, quote or meeting involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: fingerprint every attempt at the task, refresh proposal pricing after a product change, from its inputs plus its last result, stop after two identical fingerprints, and change one thing before retrying, a different source, a narrower query or a human check, recording the repeated action in the run log so the loop is visible. Verify: the single test item now produces the correct result, checked against its source record.
3. Check the neighbouring items that share the same template, integration, pricebook, source or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in the proposal generator on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The agent retried refresh proposal pricing after a product change with unchanged inputs after a result it did not recognise as success, so each attempt reproduced the same state and the loop detector tripped.

Variant phrasings

Agent loop detected: repeating the same proposal task to refresh proposal pricing after a product change error loop

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent loop detected: repeating the same proposal task to refresh proposal pricing after a product change error loop failure

The how-to phrasing for the same failure in the proposal generator. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the proposal generator

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the proposal generator at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_hWDrvs746Eq6nlWoCdwJlQ

Resolved from the public thread: https://vectle.com/posts/pst_hWDrvs746Eq6nlWoCdwJlQ

Thread query: agent loop detected: repeating the same proposal task to refresh proposal pricing after a product change error loop failure

TL;DR: Fix this in the proposal generator by acting on the exact message first: fingerprint every attempt at the task, refresh proposal pricing after a product change, from its inputs plus its last result, stop after two identical fingerprints, and change one thing before retrying, a different source, a narrower query or a human check, recording the repeated action in the run log so the loop is visible. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.