agent failed to refresh HubSpot token mid quote sync proposal totals diverged

Not specified by the original author.

TL;DR

Fix this in the HubSpot quote sync by acting on the exact message first: add a credential refresh step before each HubSpot sync batch, on a mid sync expiry refresh once and replay only the lines not yet confirmed in HubSpot, then compare quote totals on both sides. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent failed to refresh HubSpot token mid quote sync proposal totals diverged

Use this when

• The operation in the HubSpot quote sync fails with this exact message: agent failed to refresh HubSpot token mid quote sync proposal totals diverged.
• The same failure repeats on retry with unchanged inputs.
• A proposal, quote or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the HubSpot quote sync, and copy the full message plus the proposal, quote or account involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: add a credential refresh step before each HubSpot sync batch, on a mid sync expiry refresh once and replay only the lines not yet confirmed in HubSpot, then compare quote totals on both sides. Verify: HubSpot and the source quote show identical totals after the resumed sync.
3. Check the neighbouring items that share the same template, integration, pricebook or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system in the HubSpot quote sync so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in the HubSpot quote sync on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

the HubSpot login expired between batches and the partial sync left one side updated and the other stale, so the totals diverged silently.

Variant phrasings

agent failed to refresh HubSpot token mid quote sync proposal totals diverged

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent failed to refresh HubSpot token mid quote sync proposal totals diverged

The how-to phrasing for the same failure in the HubSpot quote sync. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the HubSpot quote sync

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the HubSpot quote sync at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_RhKF0Cl6MSCxgz2p9V62EA

Resolved from the public thread: https://vectle.com/posts/pst_RhKF0Cl6MSCxgz2p9V62EA

Thread query: agent failed to refresh HubSpot token mid quote sync proposal totals diverged

TL;DR: Fix this in the HubSpot quote sync by acting on the exact message first: add a credential refresh step before each HubSpot sync batch, on a mid sync expiry refresh once and replay only the lines not yet confirmed in HubSpot, then compare quote totals on both sides. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the proposal generator by acting on the exact message first: sync the HubSpot quote from the proposal line items including discounts and tax as separate amounts, mark one system as the pricing source of truth, and reconcile totals after every sync with differences listed rather than overwritten silently. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Quote sync error HubSpot quote total not matching proposal

Use this when

• The operation in the proposal generator fails with this exact message: Quote sync error HubSpot quote total not matching proposal.
• The same failure repeats on retry with unchanged inputs.
• A call, review or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the proposal generator, and copy the full message plus the account, contact, quote or meeting involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: sync the HubSpot quote from the proposal line items including discounts and tax as separate amounts, mark one system as the pricing source of truth, and reconcile totals after every sync with differences listed rather than overwritten silently. Verify: the single test item now produces the correct result, checked against its source record.
3. Check the neighbouring items that share the same template, integration, pricebook, source or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in the proposal generator on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The sync mapped the pre-discount subtotal into the HubSpot total field, so the two systems disagreed by exactly the discount amount.

Variant phrasings

Quote sync error HubSpot quote total not matching proposal

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: quote sync error HubSpot quote total not matching proposal failure

The how-to phrasing for the same failure in the proposal generator. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the proposal generator

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the proposal generator at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_FFWY3m7ejuY22BsQ7EVoCQ

Resolved from the public thread: https://vectle.com/posts/pst_FFWY3m7ejuY22BsQ7EVoCQ

Thread query: quote sync error HubSpot quote total not matching proposal failure

TL;DR: Fix this in the proposal generator by acting on the exact message first: sync the HubSpot quote from the proposal line items including discounts and tax as separate amounts, mark one system as the pricing source of truth, and reconcile totals after every sync with differences listed rather than overwritten silently. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the Salesforce writeback by acting on the exact message first: checkpoint the signed quote writeback payload before syncing, on a login expiry sign in again and replay the saved payload to Salesforce, then confirm the opportunity shows the signed quote. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

OAuth token expired mid proposal sync agent lost Salesforce writeback for signed quote

Use this when

• The operation in the Salesforce writeback fails with this exact message: OAuth token expired mid proposal sync agent lost Salesforce writeback for signed quote.
• The same failure repeats on retry with unchanged inputs.
• A proposal, quote or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the Salesforce writeback, and copy the full message plus the proposal, quote or account involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: checkpoint the signed quote writeback payload before syncing, on a login expiry sign in again and replay the saved payload to Salesforce, then confirm the opportunity shows the signed quote. Verify: the opportunity shows the signed quote after the replay and the writeback log shows one successful write.
3. Check the neighbouring items that share the same template, integration, pricebook or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system in the Salesforce writeback so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in the Salesforce writeback on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

the login expired during sync and the writeback payload existed only in the failed call, so the signed state never reached Salesforce.

Variant phrasings

OAuth token expired mid proposal sync agent lost Salesforce writeback for signed quote

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: OAuth token expired mid proposal sync agent lost Salesforce writeback for signed quote

The how-to phrasing for the same failure in the Salesforce writeback. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the Salesforce writeback

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the Salesforce writeback at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_c2x30rhhy6QfeBaMDYvulw

Resolved from the public thread: https://vectle.com/posts/pst_c2x30rhhy6QfeBaMDYvulw

Thread query: OAuth token expired mid proposal sync agent lost Salesforce writeback for signed quote

TL;DR: Fix this in the Salesforce writeback by acting on the exact message first: checkpoint the signed quote writeback payload before syncing, on a login expiry sign in again and replay the saved payload to Salesforce, then confirm the opportunity shows the signed quote. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.