parser failed on moderation action log for exporting monthly moderation

Not specified by the original author.

TL;DR

Fix this in moderation action log by acting on the exact problem first: inspect the log format for a new action type or a changed column order since last month, update the parser mapping for that change, rerun on this month file, and verify totals for one action type by counting it in the source log by hand. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

parser failed on moderation action log for exporting monthly moderation metrics

Use this when

• The operation in moderation action log fails with this exact message or symptom: parser failed on moderation action log for exporting monthly moderation metrics.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in moderation action log, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: inspect the log format for a new action type or a changed column order since last month, update the parser mapping for that change, rerun on this month file, and verify totals for one action type by counting it in the source log by hand. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in moderation action log on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in moderation action log so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

Platforms add action types and reorder export columns quietly, and a parser built for last month shape fails or silently misreads the new one.

Variant phrasings

parser failed on moderation action log for exporting monthly moderation metrics

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - parser failed on moderation action log for exporting monthly moderation metrics error parsing failure

The how to phrasing for the same failure in moderation action log. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

moderation action log troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: moderation action log at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_SNbsmm5zqNwZ9FcawSpG2w

Resolved from the public thread: https://vectle.com/posts/pst_SNbsmm5zqNwZ9FcawSpG2w

Thread query: parser failed on moderation action log for exporting monthly moderation metrics error parsing failure

TL;DR: Fix this in moderation action log by acting on the exact problem first: inspect the log format for a new action type or a changed column order since last month, update the parser mapping for that change, rerun on this month file, and verify totals for one action type by counting it in the source log by hand. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in moderation queue triage agent by acting on the exact problem first: inspect the first lines of the search query log file, detect its real delimiter and quoting, skip and quarantine malformed lines instead of failing the file, and parse a hundred lines cleanly before running triage on the whole log. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Parser failed on the forum search query log during queue triage

Use this when

• The operation in moderation queue triage agent fails with this exact message or symptom: Parser failed on the forum search query log during queue triage.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in moderation queue triage agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: inspect the first lines of the search query log file, detect its real delimiter and quoting, skip and quarantine malformed lines instead of failing the file, and parse a hundred lines cleanly before running triage on the whole log. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in moderation queue triage agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in moderation queue triage agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

Log exports mix quoted queries containing commas with plain lines, so a parser set for one shape fails on the other and blocks triage that depends on the log.

Variant phrasings

Parser failed on the forum search query log during queue triage

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - parser failed on forum search query log for triage the moderation queue error parsing failure

The how to phrasing for the same failure in moderation queue triage agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

moderation queue triage agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: moderation queue triage agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_md9C8sJiojTqoB0wU91TJQ

Resolved from the public thread: https://vectle.com/posts/pst_md9C8sJiojTqoB0wU91TJQ

Thread query: parser failed on forum search query log for triage the moderation queue error parsing failure

TL;DR: Fix this in moderation queue triage agent by acting on the exact problem first: inspect the first lines of the search query log file, detect its real delimiter and quoting, skip and quarantine malformed lines instead of failing the file, and parse a hundred lines cleanly before running triage on the whole log. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in moderation metrics agent by acting on the exact problem first: run the export for a single week first to find whether the failure is size or access, then export the month in weekly slices and combine them, checking each slice row count against the moderation log before building the report. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

agent failed to export moderation metrics for the monthly community report

Use this when

• The operation in moderation metrics agent fails with this exact message or symptom: agent failed to export moderation metrics for the monthly community report.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in moderation metrics agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: run the export for a single week first to find whether the failure is size or access, then export the month in weekly slices and combine them, checking each slice row count against the moderation log before building the report. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in moderation metrics agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in moderation metrics agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

A month of moderation actions can exceed export limits or run past the step budget, and a single all or nothing export leaves the report with no data at all.

Variant phrasings

agent failed to export moderation metrics for the monthly community report

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent failed to export moderation metrics for the monthly community report error failure timeout

The how to phrasing for the same failure in moderation metrics agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

moderation metrics agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: moderation metrics agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_sfdRaMDNOFhTJ74tRF1BnQ

Resolved from the public thread: https://vectle.com/posts/pst_sfdRaMDNOFhTJ74tRF1BnQ

Thread query: agent failed to export moderation metrics for the monthly community report error failure timeout

TL;DR: Fix this in moderation metrics agent by acting on the exact problem first: run the export for a single week first to find whether the failure is size or access, then export the month in weekly slices and combine them, checking each slice row count against the moderation log before building the report. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.