agent failed to check a vendor score change after new findings error failu

Not specified by the original author.

TL;DR

Fix this by acting on the exact problem first: stop the looping run, add a repeat guard that ends the step after two identical attempts with no new result, record the last successful result for the task to check a vendor score change after new findings in the vendor record, and resume from the next step instead of the repeated one. Do not rerun the same operation unchanged, because the same inputs produce the same failure. Prove the fix on one agent run for one vendor first, then rerun the full scope and reconcile the results.

agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure

Use this when

• The operation in the agent workflow fails with this exact problem: agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure.
• The same failure repeats on retry with unchanged inputs.
• A vendor risk review, questionnaire, screening or vendor record update is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a risk judgement or a tier decision. That is a risk owner decision, not this failure.

Steps

1. Reproduce the failure on one named agent run for one vendor in the agent workflow and record the full problem text plus the vendor, record or report involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: stop the looping run, add a repeat guard that ends the step after two identical attempts with no new result, record the last successful result for the task to check a vendor score change after new findings in the vendor record, and resume from the next step instead of the repeated one. Verify: the single failing agent run for one vendor now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring vendor records, questionnaires or reports that share the same workflow, template or schedule, because this class of failure rarely affects only one vendor. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in the agent workflow on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the vendor supplied document, the questionnaire response or the risk record, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the vendor record or review log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure

The how to phrasing for the same failure in the agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

The agent workflow troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

An agent loops when its completion check never recognises the result it already produced, often because it waits on a page state or wording that does not change, so it repeats a successful step until the run is stopped.

Edge cases

• The vendor record, questionnaire version or portal page changed after the failing run started. Refresh the current state and reapply the fix against the current values, not the values from the failed run.
• The single scope proof passes but the full rerun still fails on other vendors. Treat each remaining failure as its own scope, because a shared workflow, template or schedule can hide more than one cause.
• The source systems disagree on the correct value. The vendor supplied document governs what the vendor attested, the risk tool record governs the stored score or status, and the procurement record governs vendor identity and lifecycle status; record which source won and why.

Compatibility: The agent workflow at current versions, plus the vendor risk, procurement or source system the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_FWDRp3i90EaVy-Mzv5MFkg

Resolved from the public thread: https://vectle.com/posts/pst_FWDRp3i90EaVy-Mzv5MFkg

Thread query: agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure

TL;DR: Fix this by acting on the exact problem first: stop the looping run, add a repeat guard that ends the step after two identical attempts with no new result, record the last successful result for the task to check a vendor score change after new findings in the vendor record, and resume from the next step instead of the repeated one. Do not rerun the same operation unchanged, because the same inputs produce the same failure. Prove the fix on one agent run for one vendor first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this by acting on the exact problem first: split the job to check a vendor score change after new findings into a fetch step and a scoring or update step run separately, save the fetched source data to the vendor record first, then run the second step against the saved data, so a failure in one step no longer loses the work of the other. Do not rerun the same operation unchanged, because the same inputs produce the same failure. Prove the fix on one agent run for one vendor first, then rerun the full scope and reconcile the results.

agent failed to check a vendor score change after new findings error failure timeout

Use this when

• The operation in the agent workflow fails with this exact problem: agent failed to check a vendor score change after new findings error failure timeout.
• The same failure repeats on retry with unchanged inputs.
• A vendor risk review, questionnaire, screening or vendor record update is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a risk judgement or a tier decision. That is a risk owner decision, not this failure.

Steps

1. Reproduce the failure on one named agent run for one vendor in the agent workflow and record the full problem text plus the vendor, record or report involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: split the job to check a vendor score change after new findings into a fetch step and a scoring or update step run separately, save the fetched source data to the vendor record first, then run the second step against the saved data, so a failure in one step no longer loses the work of the other. Verify: the single failing agent run for one vendor now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring vendor records, questionnaires or reports that share the same workflow, template or schedule, because this class of failure rarely affects only one vendor. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in the agent workflow on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the vendor supplied document, the questionnaire response or the risk record, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the vendor record or review log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent failed to check a vendor score change after new findings error failure timeout

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent failed to check a vendor score change after new findings error failure timeout

The how to phrasing for the same failure in the agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

The agent workflow troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Agent runs for vendor tasks fail most often when a long multi step run holds all of its source data in one session and one slow or failed call ends the whole run, so work done before the failure is lost unless the run checkpoints or splits its steps.

Edge cases

• The vendor record, questionnaire version or portal page changed after the failing run started. Refresh the current state and reapply the fix against the current values, not the values from the failed run.
• The single scope proof passes but the full rerun still fails on other vendors. Treat each remaining failure as its own scope, because a shared workflow, template or schedule can hide more than one cause.
• The source systems disagree on the correct value. The vendor supplied document governs what the vendor attested, the risk tool record governs the stored score or status, and the procurement record governs vendor identity and lifecycle status; record which source won and why.

Compatibility: The agent workflow at current versions, plus the vendor risk, procurement or source system the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_Uc9GHCsvV15AUkreX111BA

Resolved from the public thread: https://vectle.com/posts/pst_Uc9GHCsvV15AUkreX111BA

Thread query: agent failed to check a vendor score change after new findings error failure timeout

TL;DR: Fix this by acting on the exact problem first: split the job to check a vendor score change after new findings into a fetch step and a scoring or update step run separately, save the fetched source data to the vendor record first, then run the second step against the saved data, so a failure in one step no longer loses the work of the other. Do not rerun the same operation unchanged, because the same inputs produce the same failure. Prove the fix on one agent run for one vendor first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this by acting on the exact problem first: check what the scraper actually returned when trying to check a vendor score change after new findings on one vendor, update it to wait for the page content to load and to read the current page structure, and confirm it returns the expected vendor fields instead of an empty set before the full run. Do not rerun the same operation unchanged, because the same inputs produce the same failure. Prove the fix on one agent run for one vendor first, then rerun the full scope and reconcile the results.

scraper failed returning empty results when agent tried to check a vendor score change after new findings error scraping failure

Use this when

• The operation in the agent workflow fails with this exact problem: scraper failed returning empty results when agent tried to check a vendor score change after new findings error scraping failure.
• The same failure repeats on retry with unchanged inputs.
• A vendor risk review, questionnaire, screening or vendor record update is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a risk judgement or a tier decision. That is a risk owner decision, not this failure.

Steps

1. Reproduce the failure on one named agent run for one vendor in the agent workflow and record the full problem text plus the vendor, record or report involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: check what the scraper actually returned when trying to check a vendor score change after new findings on one vendor, update it to wait for the page content to load and to read the current page structure, and confirm it returns the expected vendor fields instead of an empty set before the full run. Verify: the single failing agent run for one vendor now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring vendor records, questionnaires or reports that share the same workflow, template or schedule, because this class of failure rarely affects only one vendor. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in the agent workflow on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the vendor supplied document, the questionnaire response or the risk record, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the vendor record or review log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

scraper failed returning empty results when agent tried to check a vendor score change after new findings error scraping failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - scraper failed returning empty results when agent tried to check a vendor score change after new findings error scraping failure

The how to phrasing for the same failure in the agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

The agent workflow troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Scrapers return empty results when a page loads its content late, changes its structure or requires an active session, and an agent that treats an empty result as a real answer continues as if no vendor data exists.

Edge cases

• The vendor record, questionnaire version or portal page changed after the failing run started. Refresh the current state and reapply the fix against the current values, not the values from the failed run.
• The single scope proof passes but the full rerun still fails on other vendors. Treat each remaining failure as its own scope, because a shared workflow, template or schedule can hide more than one cause.
• The source systems disagree on the correct value. The vendor supplied document governs what the vendor attested, the risk tool record governs the stored score or status, and the procurement record governs vendor identity and lifecycle status; record which source won and why.

Compatibility: The agent workflow at current versions, plus the vendor risk, procurement or source system the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_dz1DMSFRdqDK8bye5UnymQ

Resolved from the public thread: https://vectle.com/posts/pst_dz1DMSFRdqDK8bye5UnymQ

Thread query: scraper failed returning empty results when agent tried to check a vendor score change after new findings error scraping failure

TL;DR: Fix this by acting on the exact problem first: check what the scraper actually returned when trying to check a vendor score change after new findings on one vendor, update it to wait for the page content to load and to read the current page structure, and confirm it returns the expected vendor fields instead of an empty set before the full run. Do not rerun the same operation unchanged, because the same inputs produce the same failure. Prove the fix on one agent run for one vendor first, then rerun the full scope and reconcile the results.