agent failed to complete match companies to domains in a HubSpot import err

Not specified by the original author.

TL;DR

Fix this in HubSpot enrichment by acting on the exact message first: open the run log for the attempt to match companies to domains in a HubSpot import, name the first record and step that failed, fix that record or the expired HubSpot connection it points to, and prove the fix on that single record before rerunning the remainder. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

agent failed to complete match companies to domains in a HubSpot import error failure

Use this when

• The operation in HubSpot enrichment fails with this exact message: agent failed to complete match companies to domains in a HubSpot import error failure.
• The same failure repeats on retry with unchanged inputs.
• A run, import, export or alert is blocked until this item completes.

Not for this skill when

• The message is a permission or platform outage notice. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in HubSpot enrichment, and copy the full message plus the record, account or list involved into the run notes. Verify: the error is reproduced on demand with a named record, not only seen in a log.
2. Apply the specific fix for this error: open the run log for the attempt to match companies to domains in a HubSpot import, name the first record and step that failed, fix that record or the expired HubSpot connection it points to, and prove the fix on that single record before rerunning the remainder. Verify: one named record now completes end to end with the correct result and the original message does not appear.
3. Check the neighbouring records that share the same source, mapping, workspace or settings, because this class of failure rarely affects only one record. Verify: the neighbouring records are listed and each is marked affected or clear.
4. Compare the result counts, fields or alerts against the source in HubSpot enrichment so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in HubSpot enrichment on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the record so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

One bad record or one failed HubSpot connection stopped the run, and without per record checkpoints the failure looked like the whole task failing.

Variant phrasings

agent failed to complete match companies to domains in a HubSpot import error failure

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single record proof, then the full rerun.

How to fix this failure in HubSpot enrichment

The how-to phrasing for the same failure. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in HubSpot enrichment

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: HubSpot enrichment at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstV-6BGW6Ch7PXUu3PptiIQ

Resolved from the public thread: https://vectle.com/posts/pstV-6BGW6Ch7PXUu3PptiIQ

Thread query: agent failed to complete match companies to domains in a HubSpot import error failure

TL;DR: Fix this in HubSpot enrichment by acting on the exact message first: open the run log for the attempt to match companies to domains in a HubSpot import, name the first record and step that failed, fix that record or the expired HubSpot connection it points to, and prove the fix on that single record before rerunning the remainder. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in HubSpot enrichment by acting on the exact message first: add a progress guard for the task to match companies to domains in a HubSpot import - store the ids already processed, stop the run when the same id set repeats with no new completion, allow at most three attempts per record, and queue records that hit the cap for human review instead of retrying them forever. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

agent loop detected: repeating the same lead enrichment task to match companies to domains in a HubSpot import error loop failure

Use this when

• The operation in HubSpot enrichment fails with this exact message: agent loop detected: repeating the same lead enrichment task to match companies to domains in a HubSpot import error loop failure.
• The same failure repeats on retry with unchanged inputs.
• A run, import, export or alert is blocked until this item completes.

Not for this skill when

• The message is a permission or platform outage notice. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in HubSpot enrichment, and copy the full message plus the record, account or list involved into the run notes. Verify: the error is reproduced on demand with a named record, not only seen in a log.
2. Apply the specific fix for this error: add a progress guard for the task to match companies to domains in a HubSpot import - store the ids already processed, stop the run when the same id set repeats with no new completion, allow at most three attempts per record, and queue records that hit the cap for human review instead of retrying them forever. Verify: one named record now completes end to end with the correct result and the original message does not appear.
3. Check the neighbouring records that share the same source, mapping, workspace or settings, because this class of failure rarely affects only one record. Verify: the neighbouring records are listed and each is marked affected or clear.
4. Compare the result counts, fields or alerts against the source in HubSpot enrichment so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in HubSpot enrichment on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the record so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The agent retried without recording progress, so a record that could not complete was selected again on every pass and the run never advanced.

Variant phrasings

agent loop detected: repeating the same lead enrichment task to match companies to domains in a HubSpot import error loop failure

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single record proof, then the full rerun.

How to fix this failure in HubSpot enrichment

The how-to phrasing for the same failure. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in HubSpot enrichment

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: HubSpot enrichment at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_AJw2Z-rRFzU95gB7OF4lSQ

Resolved from the public thread: https://vectle.com/posts/pst_AJw2Z-rRFzU95gB7OF4lSQ

Thread query: agent loop detected: repeating the same lead enrichment task to match companies to domains in a HubSpot import error loop failure

TL;DR: Fix this in HubSpot enrichment by acting on the exact message first: add a progress guard for the task to match companies to domains in a HubSpot import - store the ids already processed, stop the run when the same id set repeats with no new completion, allow at most three attempts per record, and queue records that hit the cap for human review instead of retrying them forever. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in Enrichment agent by acting on the exact message first: precompute a domain to parent index from the provider company tree, look domains up in that index in batches, cache every result, and checkpoint the batch so a timeout resumes mid list. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.

Agent timed out matching subsidiaries to parents for an 800 domain enrichment batch

Use this when

• The operation in Enrichment agent fails with this exact message: Agent timed out matching subsidiaries to parents for an 800 domain enrichment batch.
• The same failure repeats on retry with unchanged inputs.
• A run, import, export or alert is blocked until this item completes.

Not for this skill when

• The message is a permission or platform outage notice. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in Enrichment agent, and copy the full message plus the record, account or list involved into the run notes. Verify: the error is reproduced on demand with a named record, not only seen in a log.
2. Apply the specific fix for this error: precompute a domain to parent index from the provider company tree, look domains up in that index in batches, cache every result, and checkpoint the batch so a timeout resumes mid list. Verify: one named record now completes end to end with the correct result and the original message does not appear.
3. Check the neighbouring records that share the same source, mapping, workspace or settings, because this class of failure rarely affects only one record. Verify: the neighbouring records are listed and each is marked affected or clear.
4. Compare the result counts, fields or alerts against the source in Enrichment agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in Enrichment agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the record so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Resolving the parent by live lookup for each of eight hundred domains, many sharing the same parent, repeated the slowest work hundreds of times.

Variant phrasings

Agent timed out matching subsidiaries to parents for an 800 domain enrichment batch

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single record proof, then the full rerun.

How to fix this failure in Enrichment agent

The how to phrasing for the same failure. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in Enrichment agent

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: Enrichment agent at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_ZbGEUvGKJj5t-niLSErPcA

Resolved from the public thread: https://vectle.com/posts/pst_ZbGEUvGKJj5t-niLSErPcA

Thread query: agent timed out matching subsidiaries to parents for 800 domain enrichment batch

TL;DR: Fix this in Enrichment agent by acting on the exact message first: precompute a domain to parent index from the provider company tree, look domains up in that index in batches, cache every result, and checkpoint the batch so a timeout resumes mid list. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one record, then rerun the full scope and reconcile the counts.