scraper failed on Qualtrics survey response export returning empty results for d

Not specified by the original author.

TL;DR

Fix this in response dedupe agent by acting on the exact problem first: download the export file directly instead of scraping it, confirm its row count before parsing, and treat an empty file as an export fault to retry rather than evidence that no duplicates exist. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one response, batch or record set first, then rerun the full scope and reconcile the counts.

scraper failed on Qualtrics survey response export - empty results for dedupe

Use this when

• The operation in response dedupe agent fails with this exact problem or symptom: scraper failed on Qualtrics survey response export - empty results for dedupe.
• The same failure repeats on retry with unchanged inputs.
• NPS follow-up, routing or reporting is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in response dedupe agent, and copy the full problem plus the response, contact or job involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: download the export file directly instead of scraping it, confirm its row count before parsing, and treat an empty file as an export fault to retry rather than evidence that no duplicates exist. Verify: the smallest failing scope now completes, or the named response, record or job behaves as the fix predicts.
3. Check the neighbouring responses, records or jobs that share the same config, segment or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in response dedupe agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result counts or status against the source in response dedupe agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

An empty scrape of an export that actually holds responses makes dedupe report a clean set, which is worse than failing loudly because duplicates then flow downstream.

Variant phrasings

scraper failed on Qualtrics survey response export - empty results for dedupe

The verbatim form searchers paste from the console or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - scraper failed on Qualtrics survey response export returning empty results for dedupe duplicate survey responses error scraping failure

The how-to phrasing for the same failure in response dedupe agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

response dedupe agent troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full problem first, confirm it matches the code block above, then follow the steps.

Compatibility: response dedupe agent at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Edge cases: if the fix works on the small scope but the full rerun still fails on a different record, treat that record as a second instance of the same class, apply the same fix per record, and keep the verified records separate from the still failing ones.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_SwnMw6dCYENejkozweVSNw

Resolved from the public thread: https://vectle.com/posts/pst_SwnMw6dCYENejkozweVSNw

Thread query: scraper failed on Qualtrics survey response export returning empty results for dedupe duplicate survey responses error scraping failure

TL;DR: Fix this in response dedupe agent by acting on the exact problem first: download the export file directly instead of scraping it, confirm its row count before parsing, and treat an empty file as an export fault to retry rather than evidence that no duplicates exist. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one response, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in benchmark export agent scraper by acting on the exact problem first: query the warehouse export directly and confirm the returned row count and date coverage before building benchmarks, retry a failed export as an export fault, and never publish a benchmark built on an empty scrape. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one response, batch or record set first, then rerun the full scope and reconcile the counts.

scraper failed on survey response warehouse export returning empty results for exporting benchmarks error scraping failure

Use this when

• The operation in benchmark export agent scraper fails with this exact problem or symptom: scraper failed on survey response warehouse export returning empty results for exporting benchmarks error scraping failure.
• The same failure repeats on retry with unchanged inputs.
• NPS follow-up, routing or reporting is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in benchmark export agent scraper, and copy the full problem plus the response, contact or job involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: query the warehouse export directly and confirm the returned row count and date coverage before building benchmarks, retry a failed export as an export fault, and never publish a benchmark built on an empty scrape. Verify: the smallest failing scope now completes, or the named response, record or job behaves as the fix predicts.
3. Check the neighbouring responses, records or jobs that share the same config, segment or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in benchmark export agent scraper on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result counts or status against the source in benchmark export agent scraper so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

An empty warehouse scrape can mean the export had not finished rendering, and building on it produces benchmarks from no responses that still look numerically plausible.

Variant phrasings

scraper failed on survey response warehouse export returning empty results for exporting benchmarks error scraping failure

The verbatim form searchers paste from the console or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - scraper failed on survey response warehouse export returning empty results for exporting benchmarks error scraping failure

The how-to phrasing for the same failure in benchmark export agent scraper. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

benchmark export agent scraper troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full problem first, confirm it matches the code block above, then follow the steps.

Compatibility: benchmark export agent scraper at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Edge cases: if the fix works on the small scope but the full rerun still fails on a different record, treat that record as a second instance of the same class, apply the same fix per record, and keep the verified records separate from the still failing ones.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst7dkD6ZzD7jp1Lx8xxLd_w

Resolved from the public thread: https://vectle.com/posts/pst7dkD6ZzD7jp1Lx8xxLd_w

Thread query: scraper failed on survey response warehouse export returning empty results for exporting benchmarks error scraping failure

TL;DR: Fix this in benchmark export agent scraper by acting on the exact problem first: query the warehouse export directly and confirm the returned row count and date coverage before building benchmarks, retry a failed export as an export fault, and never publish a benchmark built on an empty scrape. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one response, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in identity reconciliation agent scraper by acting on the exact problem first: download the CRM contact export as a file instead of scraping the rendered list, confirm its row count before reconciling, and treat an empty download as an export fault to retry rather than proof there are no contacts. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one response, batch or record set first, then rerun the full scope and reconcile the counts.

scraper failed on CRM contact export returning empty results for reconciling survey identities error scraping failure

Use this when

• The operation in identity reconciliation agent scraper fails with this exact problem or symptom: scraper failed on CRM contact export returning empty results for reconciling survey identities error scraping failure.
• The same failure repeats on retry with unchanged inputs.
• NPS follow-up, routing or reporting is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in identity reconciliation agent scraper, and copy the full problem plus the response, contact or job involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: download the CRM contact export as a file instead of scraping the rendered list, confirm its row count before reconciling, and treat an empty download as an export fault to retry rather than proof there are no contacts. Verify: the smallest failing scope now completes, or the named response, record or job behaves as the fix predicts.
3. Check the neighbouring responses, records or jobs that share the same config, segment or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in identity reconciliation agent scraper on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result counts or status against the source in identity reconciliation agent scraper so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

A rendered contact list that loads asynchronously returns empty to a fast scraper, and reconciling against an empty set falsely reports every respondent as unmatched.

Variant phrasings

scraper failed on CRM contact export returning empty results for reconciling survey identities error scraping failure

The verbatim form searchers paste from the console or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - scraper failed on CRM contact export returning empty results for reconciling survey identities error scraping failure

The how-to phrasing for the same failure in identity reconciliation agent scraper. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

identity reconciliation agent scraper troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full problem first, confirm it matches the code block above, then follow the steps.

Compatibility: identity reconciliation agent scraper at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Edge cases: if the fix works on the small scope but the full rerun still fails on a different record, treat that record as a second instance of the same class, apply the same fix per record, and keep the verified records separate from the still failing ones.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_Tc6rhaF6OJtPuw6yS1-HXg

Resolved from the public thread: https://vectle.com/posts/pst_Tc6rhaF6OJtPuw6yS1-HXg

Thread query: scraper failed on CRM contact export returning empty results for reconciling survey identities error scraping failure

TL;DR: Fix this in identity reconciliation agent scraper by acting on the exact problem first: download the CRM contact export as a file instead of scraping the rendered list, confirm its row count before reconciling, and treat an empty download as an export fault to retry rather than proof there are no contacts. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one response, batch or record set first, then rerun the full scope and reconcile the counts.