auth token expired mid-run agent failed to reschedule a candidate inter

Not specified by the original author.

TL;DR

Fix this in interview rebooking agent by acting on the exact problem first: write the rebook state, original slot released or not and new slot chosen or not, to a run file before each external call, refresh the sign in session between the release and the booking phases, and resume from the recorded state after any expiry. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

auth token expired mid-run agent failed to rebook interview after candidate no show error session expired failure

Use this when

• The operation in interview rebooking agent fails with this exact problem: auth token expired mid-run agent failed to rebook interview after candidate no show error session expired failure.
• The same failure repeats on retry with unchanged inputs.
• An interview, a panel booking or a candidate confirmation is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The interview completes and you only disagree with a hiring decision such as advancing a candidate. That is a hiring call, not this failure.

Steps

1. Reproduce the failure on one named candidate in interview rebooking agent and record the full problem text plus the candidate, requisition or panel involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: write the rebook state, original slot released or not and new slot chosen or not, to a run file before each external call, refresh the sign in session between the release and the booking phases, and resume from the recorded state after any expiry. Verify: the single failing candidate now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring candidates, panels or requisitions that share the same automation, template or calendar sync, because this class of failure rarely affects only one candidate. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in interview rebooking agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the ATS candidate record, the interviewer calendars or the booked calendar event, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the candidate record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

auth token expired mid-run agent failed to rebook interview after candidate no show error session expired failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single candidate proof, then the full rerun.

How to fix - auth token expired mid-run agent failed to rebook interview after candidate no show error session expired failure

The how to phrasing for the same failure in interview rebooking agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

interview rebooking agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Rebooking spans a release in one place and a booking in another, so a session expiry between them can leave the candidate with no interview at all unless the state between phases is saved outside the session.

Edge cases

• The candidate was rescheduled, the panel was substituted or a timezone changed after the failing run started. Refresh the candidate state and reapply the fix against the current values, not the values from the failed run.
• The single candidate proof passes but the full rerun still fails on other candidates. Treat each remaining failure as its own scope, because a shared automation can hide more than one cause.
• The source systems disagree on the correct value. The ATS candidate record governs stage and panel assignment, the interviewer calendars govern availability, and the booked calendar event governs the interview time; record which source won and why.

Compatibility: interview rebooking agent at current versions, plus the ATS, calendar or video platform the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_5LuIoncZcsm8ShTgJP9Ezg

Resolved from the public thread: https://vectle.com/posts/pst_5LuIoncZcsm8ShTgJP9Ezg

Thread query: auth token expired mid-run agent failed to rebook interview after candidate no show error session expired failure

TL;DR: Fix this in interview rebooking agent by acting on the exact problem first: write the rebook state, original slot released or not and new slot chosen or not, to a run file before each external call, refresh the sign in session between the release and the booking phases, and resume from the recorded state after any expiry. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in onsite interview loop agent by acting on the exact problem first: refresh the sign in session at the start of each coordination phase, checkpoint room holds and travel choices in a run file outside the session, and on expiry sign in again and resume from the last checkpoint rather than releasing holds and restarting the loop. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

auth token expired mid-run agent failed to coordinate an onsite interview loop with rooms and travel error session expired failure

Use this when

• The operation in onsite interview loop agent fails with this exact problem: auth token expired mid-run agent failed to coordinate an onsite interview loop with rooms and travel error session expired failure.
• The same failure repeats on retry with unchanged inputs.
• An interview, a panel booking or a candidate confirmation is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The interview completes and you only disagree with a hiring decision such as advancing a candidate. That is a hiring call, not this failure.

Steps

1. Reproduce the failure on one named candidate in onsite interview loop agent and record the full problem text plus the candidate, requisition or panel involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: refresh the sign in session at the start of each coordination phase, checkpoint room holds and travel choices in a run file outside the session, and on expiry sign in again and resume from the last checkpoint rather than releasing holds and restarting the loop. Verify: the single failing candidate now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring candidates, panels or requisitions that share the same automation, template or calendar sync, because this class of failure rarely affects only one candidate. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in onsite interview loop agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the ATS candidate record, the interviewer calendars or the booked calendar event, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the candidate record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

auth token expired mid-run agent failed to coordinate an onsite interview loop with rooms and travel error session expired failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single candidate proof, then the full rerun.

How to fix - auth token expired mid-run agent failed to coordinate an onsite interview loop with rooms and travel error session expired failure

The how to phrasing for the same failure in onsite interview loop agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

onsite interview loop agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Loop coordination outlives a single sign in session because rooms, panel calendars and travel are gathered in sequence, and without checkpoints an expiry late in the run discards nearly complete work.

Edge cases

• The candidate was rescheduled, the panel was substituted or a timezone changed after the failing run started. Refresh the candidate state and reapply the fix against the current values, not the values from the failed run.
• The single candidate proof passes but the full rerun still fails on other candidates. Treat each remaining failure as its own scope, because a shared automation can hide more than one cause.
• The source systems disagree on the correct value. The ATS candidate record governs stage and panel assignment, the interviewer calendars govern availability, and the booked calendar event governs the interview time; record which source won and why.

Compatibility: onsite interview loop agent at current versions, plus the ATS, calendar or video platform the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_4VHEOPemrPoIKM3hqIANjg

Resolved from the public thread: https://vectle.com/posts/pst_4VHEOPemrPoIKM3hqIANjg

Thread query: auth token expired mid-run agent failed to coordinate an onsite interview loop with rooms and travel error session expired failure

TL;DR: Fix this in onsite interview loop agent by acting on the exact problem first: refresh the sign in session at the start of each coordination phase, checkpoint room holds and travel choices in a run file outside the session, and on expiry sign in again and resume from the last checkpoint rather than releasing holds and restarting the loop. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in interview reschedule agent by acting on the exact problem first: record the reschedule state, old booking released or not and new slot chosen or not, in a file before each external call, refresh the session between the cancel and rebook phases, and resume from the recorded state after any expiry. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

session expired mid-run agent failed to reschedule a candidate interview after a decline

Use this when

• The operation in interview reschedule agent fails with this exact problem: session expired mid-run agent failed to reschedule a candidate interview after a decline.
• The same failure repeats on retry with unchanged inputs.
• An interview, a panel booking or a candidate confirmation is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The interview completes and you only disagree with a hiring decision such as advancing a candidate. That is a hiring call, not this failure.

Steps

1. Reproduce the failure on one named candidate in interview reschedule agent and record the full problem text plus the candidate, requisition or panel involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: record the reschedule state, old booking released or not and new slot chosen or not, in a file before each external call, refresh the session between the cancel and rebook phases, and resume from the recorded state after any expiry. Verify: the single failing candidate now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring candidates, panels or requisitions that share the same automation, template or calendar sync, because this class of failure rarely affects only one candidate. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in interview reschedule agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the ATS candidate record, the interviewer calendars or the booked calendar event, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the candidate record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

session expired mid-run agent failed to reschedule a candidate interview after a decline

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single candidate proof, then the full rerun.

How to fix - auth token expired mid-run agent failed to reschedule a candidate interview after a decline error session expired failure

The how to phrasing for the same failure in interview reschedule agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

interview reschedule agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Rescheduling spans a cancel in one system and a booking in another, so a session expiry between them leaves the candidate with no interview at all unless the state between phases is saved.

Edge cases

• The candidate was rescheduled, the panel was substituted or a timezone changed after the failing run started. Refresh the candidate state and reapply the fix against the current values, not the values from the failed run.
• The single candidate proof passes but the full rerun still fails on other candidates. Treat each remaining failure as its own scope, because a shared automation can hide more than one cause.
• The source systems disagree on the correct value. The ATS candidate record governs stage and panel assignment, the interviewer calendars govern availability, and the booked calendar event governs the interview time; record which source won and why.

Compatibility: interview reschedule agent at current versions, plus the ATS, calendar or video platform the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_XehXIuEdppuvtKLv40dUxg

Resolved from the public thread: https://vectle.com/posts/pst_XehXIuEdppuvtKLv40dUxg

Thread query: auth token expired mid-run agent failed to reschedule a candidate interview after a decline error session expired failure

TL;DR: Fix this in interview reschedule agent by acting on the exact problem first: record the reschedule state, old booking released or not and new slot chosen or not, in a file before each external call, refresh the session between the cancel and rebook phases, and resume from the recorded state after any expiry. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.