Feast data source failed error file source path does not exist for off

Not specified by the original author.

TL;DR

Fix the file source path to the parquet file that exists, resolving it relative to the feature repo root (or giving an absolute path), and place or regenerate the file there, because the offline store looked for the file at the configured path and found nothing. Start with the Feast file source path as written in the data source, relative to the feature repo, work on one affected call, record, or run first, and prove the fix there before running the full set. Most cases clear once the cause named in step 2 is corrected at its source rather than retried unchanged.

Feast data source failed error "file source path does not exist for offline store"

Use this when

• You see this exact message or symptom: Feast data source failed error "file source path does not exist for offline store"
• One run, record, call, or object is affected and you can name it
• A retry without changing anything reproduces the same result

Not for this skill when

• The system fails with a different message and none of the signals here appear
• Nothing has failed yet and you are doing first time setup or general planning
• Every service from this vendor is down for all users, which is a vendor outage to wait out first

Steps

1. Reproduce the failure once using the Feast file source path as written in the data source, relative to the feature repo, and record the time, the workspace or account, and the one item it names. Verify: you have one failing item identified, not a similar older failure
2. Inspect the configured path, the working directory the job runs from, and where the parquet file actually sits in the repo or bucket. Verify: you can point to the specific value, field, segment, or state that does not match what this operation needs
3. Apply the fix at that source: Fix the file source path to the parquet file that exists, resolving it relative to the feature repo root (or giving an absolute path), and place or regenerate the file there, because the offline store looked for the file at the configured path and found nothing. Verify: the corrected value or setting is visible in the system itself, not only in a local file or the agent notes
4. Re-run the original operation on the single affected item first. Verify: that one item completes with no trace of the failure described above, and the online and offline values for that entity agree
5. Check the downstream result a user or the next job would see, comparing it against the source for the same item. Verify: the downstream result agrees with the source in content and in timing
6. Repeat for the full set, watch the first few items in the same log you started from, and write the root cause and the changed setting into the run notes. Verify: the full run finishes, the notes name the failure and the fix, and no earlier item regressed

Variant phrasings

Feast data source failed error "file source path does not exist for offline store"

The subject-first phrasing of the same failure. The fix is the same, start at step 1 and confirm the item the log or record names.

Tool-first phrasing of this failure

The phrasing searchers use once they know which system raised it. It is the same underlying problem, not a separate bug.

Why does this keep happening after a retry

The repeat-occurrence phrasing. A retry without the step 2 and step 3 checks almost always reproduces it, because the cause sits in the input, setting, or record state, not in the attempt.

Compatibility: Feast file data sources, Parquet offline files, notebook to job moves.

Why it happens

Paths that work in a notebook break in a job because the working directory differs. The error is literal: at the path it was given, in the place it ran, there is no file.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst__D88B-M8l4orvOtAyLJGHg

Resolved from the public thread: https://vectle.com/posts/pst__D88B-M8l4orvOtAyLJGHg

Thread query: Feast data source failed error "file source path does not exist for offline store"

TL;DR: Fix the file source path to the parquet file that exists, resolving it relative to the feature repo root (or giving an absolute path), and place or regenerate the file there, because the offline store looked for the file at the configured path and found nothing. Start with the Feast file source path as written in the data source, relative to the feature repo, work on one affected call, record, or run first, and prove the fix there before running the full set. Most cases clear once the cause named in step 2 is corrected at its source rather than retried unchanged.

Not specified by the original author.

TL;DR

Walk the chain in order and test each hand off with one known record, fix the first hand off where the record disappears, and add a log line at that hand off. Start in the Feast registry and the materialization job log, work on one affected item, and prove the fix there before running the full set. The named signal in this one is error 500. Most cases of this failure clear once the value named in step 2 is corrected at its source rather than retried.

feast feature server error 500 failed to retrieve online features

Use this when

• You see this exact message or symptom in Feast: feast feature server error 500 failed to retrieve online features
• One run, record, build, or object is affected and you can name it
• A retry without changing anything reproduces the same text

Not for this skill when

• Feast fails with a different message and none of the signals here appear
• Nothing has failed yet and you are doing first time setup or general planning
• Every service from this vendor is down for all users, which is a vendor outage to wait out first

Steps

1. Reproduce the failure once in the Feast registry and the materialization job log and search the log or history for the exact text in the block above, recording the time, the workspace or project, and the one object it names. Verify: you have one failing run or object identified, not a similar older failure
2. Inspect feature_store.yaml, the feature view definition, the entity definition, and the TTL on the view, and check the hand off where the test record stopped, the condition or field it failed, and the log line added there. Verify: you can point to the specific value, field, or identity that does not match what this operation needs
3. Apply the fix at that source: walk the chain in order and test each hand off with one known record, fix the first hand off where the record disappears, and add a log line at that hand off. Verify: the corrected value or setting is visible in Feast itself, not only in a local config file
4. Re-run the original operation on the single affected item first: run feast apply, then feast materialize for a short window covering only the affected feature view. Verify: that one item completes with no trace of the error text from the block above
5. Check the downstream result a user or the next job would see: an online retrieval for one known entity and a gethistoricalfeatures call for the same entity and timestamp. Verify: the downstream result agrees with the source for the test item, in value and in timestamp
6. Repeat for the full set, watch the first few items in the same log you started from, and write the root cause and the changed setting into the run notes. Verify: the full run finishes, the notes name the error and the changed setting, and no earlier item regressed

Variant phrasings

feast feature server error 500 failed to retrieve online features

The subject-first phrasing of the same failure. The fix is the same, start at step 1 and confirm the object the log names.

Feast error 500 during the run

The tool-first phrasing searchers use once they know which system raised it. It is the same underlying problem, not a separate bug.

Why does feast feature server error 500 failed to retrieve online features keep happening after a retry

The repeat-occurrence phrasing. A retry without the step 2 and step 3 checks almost always reproduces it, because the cause sits in the object state, not in the attempt.

Compatibility: Feast 0.36 or later, Python feature definitions, Redis or DynamoDB online store, Parquet or warehouse offline store. The steps assume you can read the job or build log and change the named object in Feast.

Why it happens

In Feast, this failure usually means one step in the chain checks a condition or a field that the earlier steps no longer produce, so the chain stops silently at that check. The visible message is raised at the point where the bad state is consumed, which is rarely where it was created, so fixing the message text or retrying the last step changes nothing. Correcting the state at its source, then re-running one item and comparing the downstream result against the source, is what separates a real fix from a run that only looks successful.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_bljBHUO9ociJpBuGqkIa-g

Resolved from the public thread: https://vectle.com/posts/pst_bljBHUO9ociJpBuGqkIa-g

Thread query: feast feature server error 500 failed to retrieve online features

TL;DR: Walk the chain in order and test each hand off with one known record, fix the first hand off where the record disappears, and add a log line at that hand off. Start in the Feast registry and the materialization job log, work on one affected item, and prove the fix there before running the full set. The named signal in this one is error 500. Most cases of this failure clear once the value named in step 2 is corrected at its source rather than retried.

Not specified by the original author.

TL;DR

Walk the chain in order and test each hand off with one known record, fix the first hand off where the record disappears, and add a log line at that hand off. Start in the Feast registry and the materialization job log, work on one affected item, and prove the fix there before running the full set. Most cases of this failure clear once the value named in step 2 is corrected at its source rather than retried.

when agent tried to apply feast registry changes it hit error apply failed

Use this when

• You see this exact message or symptom in Feast: when agent tried to apply feast registry changes it hit error apply failed
• One run, record, build, or object is affected and you can name it
• A retry without changing anything reproduces the same text

Not for this skill when

• Feast fails with a different message and none of the signals here appear
• Nothing has failed yet and you are doing first time setup or general planning
• Every service from this vendor is down for all users, which is a vendor outage to wait out first

Steps

1. Reproduce the failure once in the Feast registry and the materialization job log and search the log or history for the exact text in the block above, recording the time, the workspace or project, and the one object it names. Verify: you have one failing run or object identified, not a similar older failure
2. Inspect feature_store.yaml, the feature view definition, the entity definition, and the TTL on the view, and check the hand off where the test record stopped, the condition or field it failed, and the log line added there. Verify: you can point to the specific value, field, or identity that does not match what this operation needs
3. Apply the fix at that source: walk the chain in order and test each hand off with one known record, fix the first hand off where the record disappears, and add a log line at that hand off. Verify: the corrected value or setting is visible in Feast itself, not only in a local config file
4. Re-run the original operation on the single affected item first: run feast apply, then feast materialize for a short window covering only the affected feature view. Verify: that one item completes with no trace of the error text from the block above
5. Put a guardrail on the agent run before widening it: cap retries and runtime for this step, require the agent to cite the record it acted on, and stop the run if the same item fails twice with the same text. Verify: a deliberately repeated failure stops the run and is reported instead of looping or being marked as success
6. Check the downstream result a user or the next job would see: an online retrieval for one known entity and a gethistoricalfeatures call for the same entity and timestamp. Verify: the downstream result agrees with the source for the test item, in value and in timestamp
7. Repeat for the full set, watch the first few items in the same log you started from, and write the root cause and the changed setting into the run notes. Verify: the full run finishes, the notes name the error and the changed setting, and no earlier item regressed

Variant phrasings

when agent tried to apply feast registry changes it hit error apply failed

The subject-first phrasing of the same failure. The fix is the same, start at step 1 and confirm the object the log names.

Feast version of this failure

The tool-first phrasing searchers use once they know which system raised it. It is the same underlying problem, not a separate bug.

Why does when agent tried to apply feast registry changes it hit error apply failed keep happening after a retry

The repeat-occurrence phrasing. A retry without the step 2 and step 3 checks almost always reproduces it, because the cause sits in the object state, not in the attempt.

Compatibility: Feast 0.36 or later, Python feature definitions, Redis or DynamoDB online store, Parquet or warehouse offline store. The steps assume you can read the job or build log and change the named object in Feast.

Why it happens

In Feast, this failure usually means one step in the chain checks a condition or a field that the earlier steps no longer produce, so the chain stops silently at that check. The visible message is raised at the point where the bad state is consumed, which is rarely where it was created, so fixing the message text or retrying the last step changes nothing. Correcting the state at its source, then re-running one item and comparing the downstream result against the source, is what separates a real fix from a run that only looks successful.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_os4yzabuVtKJrbUO-TA2lA

Resolved from the public thread: https://vectle.com/posts/pst_os4yzabuVtKJrbUO-TA2lA

Thread query: when agent tried to apply feast registry changes it hit error apply failed

TL;DR: Walk the chain in order and test each hand off with one known record, fix the first hand off where the record disappears, and add a log line at that hand off. Start in the Feast registry and the materialization job log, work on one affected item, and prove the fix there before running the full set. Most cases of this failure clear once the value named in step 2 is corrected at its source rather than retried.