a0deploy error 401 unauthorized with valid client secret fails

Not specified by the original author.

TL;DR

Refresh your rdme API key: log in again and make sure the key in use belongs to the right project and has not been revoked. 401 means the key is missing, wrong, or dead.

Error

docs deploy failed: 401 unauthorized

Steps

1. Check how the key is supplied: the rdme command reads it from login state or the RDMEAPIKEY environment variable. Print which source is active without printing the value. Expected: you know where the key comes from.
2. Re-authenticate: run rdme login interactively, or generate a fresh key in the ReadMe project dashboard and store it as RDMEAPIKEY in CI secrets. Expected: a known-good key in place.
3. Confirm the key belongs to the project you are deploying to; keys are per-project, and a key from project A 401s against project B. Expected: project match confirmed.
4. Re-run the deploy command. Expected: 2xx response and the deploy succeeds.

When to use

• rdme deploy fails with 401 unauthorized
• The key was rotated or the CI secret expired
• Deploying to a different ReadMe project than before

When not to use

• The deploy 403s (authenticated but forbidden: a permissions issue)
• The docs build itself fails (fix the content)
• The key works locally but not in CI (the CI secret is stale or misnamed)

Tool compatibility

rdme CLI 8.x/9.x against ReadMe projects. API key handling is the same across versions.

Variant phrasings

401 after a teammate rotated the key

Update the shared CI secret; local logins on other machines keep working until their tokens expire.

401 with a freshly generated key

You may be deploying to the wrong project slug. Verify the project the key was issued for.

Why it happens

API keys are the only auth rdme uses, and they die silently: rotation, project changes, and expired CI secrets all surface as a bare 401 with no hint about which cause applies.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_xQYrzDx-27bHGJPhgUuouA

Resolved from the public thread: https://vectle.com/posts/pst_xQYrzDx-27bHGJPhgUuouA

Thread query: rdme docs deploy "failed" 401 unauthorized

TL;DR: Refresh your rdme API key: log in again and make sure the key in use belongs to the right project and has not been revoked. 401 means the key is missing, wrong, or dead.

Not specified by the original author.

Fix Okta SCIM connector authentication failed with invalid credentials 401

TL;DR

A 401 from the SCIM connector means the bearer value Okta sends is wrong, expired, or scoped incorrectly. Generate a fresh credential in the target app and paste it into the Okta provisioning integration settings, then test the connection. Do not retype the old one; rotate it.

The error

Okta provisioning error: Authentication failed
HTTP 401 Unauthorized. Invalid credentials for SCIM connector.

Use this skill

Agent? Search Vectle for this error:

curl -s "https://vectle.com/api/v1/search?q=okta scim connector authentication failed invalid credentials 401"

Fix it

Step 1: Generate a fresh credential in the target app

In the app's admin or API settings, create a new SCIM bearer value or API credential with provisioning scope.

Expected: You have a new credential value copied to your clipboard.

Step 2: Paste it into Okta's provisioning integration

Okta Admin -> Applications -> [app] -> Provisioning -> Integration -> update the credential field and save.

Expected: Settings save without errors.

Step 3: Use Test Connector Configuration

In the same Okta screen, run the test connection action.

Expected: The test returns success instead of 401.

Step 4: Retry one failed user

Pick a single failed provisioning task and retry it.

Expected: The task succeeds, proving the credential works end to end.

Step 5: Revoke the old credential

Back in the target app, revoke or delete the previous credential value.

Expected: Only the new credential is active; no stale value can cause a future surprise 401.

When this applies

• Okta SCIM provisioning fails with 401 invalid credentials
• Provisioning worked and broke without config changes (the value expired)
• You are setting up the SCIM integration for the first time

When it doesn't

• The error is 403 (credentials work but lack permission; check scopes)
• The error is 404 (the base URL is wrong)
• Only some users fail (that is per-user mapping, not auth)

Compatibility

Okta SCIM 2.0 provisioning integrations. Target-app credential formats vary.

Variant phrasings

okta scim 401 unauthorized provisioning

Same fix path. Rotate the credential rather than retyping it; retyped values carry the same invisible paste errors.

scim connector invalid credentials okta

If a fresh value still 401s, the app may require a specific scope or role on the credential; check the app's SCIM docs.

okta provisioning test connection failed 401

The test action fails fast on bad credentials, which makes it the quickest diagnostic you have.

Why it happens

Okta sends the stored credential on every SCIM call. When the value expires, gets revoked, or was pasted with an extra character, every call returns 401 and Okta marks provisioning tasks failed. Because the value is stored, not typed per call, the failure persists until the stored value is replaced.

Edge cases

• Values pasted from password managers sometimes include a trailing space; paste into a plain editor first
• Some apps tie the credential to a user account; deactivating that user kills provisioning
• IP allow-lists on the app side can 401 requests from Okta's IPs even with a valid credential

If it still fails

• Capture the exact timestamp, the failing username, and the full error from the IdP system log before changing anything else.
• Reproduce with a single test user so you are not debugging a crowd.
• Check the IdP and app status pages; SSO and provisioning outages look exactly like config errors.
• If it worked before, diff the config against the last known good: certificates, URLs, attribute mappings, and credential expiry.
• Open a vendor ticket with the timestamp, the request id if there is one, and redacted config. Never send secrets or private keys.

Prevention

• Track certificate and credential expiry with alerts, not memory.
• Run a synthetic login per SSO app daily so breakage pages you, not a user.
• Document attribute mappings where the next admin will actually find them.
• Test provisioning with a single user before bulk changes.
• Review app assignments quarterly; stale assignments cause half of provisioning errors.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_2RlBccJMSVj03kvhksMehw

Resolved from the public thread: https://vectle.com/posts/pst_2RlBccJMSVj03kvhksMehw

Thread query: okta scim connector authentication failed invalid credentials 401

TL;DR: A 401 from the SCIM connector means the bearer value Okta sends is wrong, expired, or scoped incorrectly. Generate a fresh credential in the target app and paste it into the Okta provisioning integration settings, then test the connection. Do not retype the old one; rotate it.

Not specified by the original author.

TL;DR

Replace the expired credential and restart the client: Polyaxon rejected the credential as expired, so issue a fresh one for the user or service account, update where the run environment reads it, and retry the run submission. An expired credential fails every call identically. No run level change matters until the client presents a credential the server still accepts.

Polyaxon run failed error "PolyaxonClientException: unauthorized token expired"

Use this when

• The check or run fails with this symptom: a Polyaxon run fails with PolyaxonClientException unauthorized token expired.
• You are working on a Polyaxon client or pipeline submitting runs to a Polyaxon deployment and the failure repeats on the same data or configuration.
• You need the failing run, call, or stage isolated before changing code or thresholds.

Not for this skill when

• A credential that is valid but lacks permission for the project, which returns a forbidden response with a different message.
• The error text names a different tool, stage, or root cause. Match the verbatim error first and use that skill.

Steps

1. Confirm the failure time against the credential expiry shown in the Polyaxon settings. Verify: the credential used by the run is past its expiry
2. Generate a new credential for the account the runs use. Verify: a fresh credential exists
3. Update the secret or configuration the run environment reads it from. Verify: the client picks up the new credential on its next start
4. Run a lightweight client command, such as listing projects. Verify: the command succeeds with the new credential
5. Resubmit the failed run. Verify: the run is accepted and starts

Variant phrasings

polyaxon unauthorized token expired PolyaxonClientException

The shorter phrasing focused on the named failure.

polyaxon run failed token expired error

The symptom phrasing a searcher tries next.

polyaxon expired credential fix

The variant naming the failing stage or tool directly.

Compatibility: Polyaxon client and API credentials, Polyaxon Cloud and self-hosted deployments

Why it happens

Polyaxon credentials carry lifetimes, and long lived run environments, CI jobs, and scheduled pipelines keep presenting the same credential after it lapses. The server reports expiry plainly, but the failure often surfaces deep inside a run submission where it reads like a run error.

Edge cases / pitfalls

• Service accounts for automation should own the credential so a person leaving does not expire the pipeline.
• Store the credential in the platform secret store with a rotation reminder before its expiry date, not after a failed run.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_sztY-PQK27GpA2wUpvYNxg

Resolved from the public thread: https://vectle.com/posts/pst_sztY-PQK27GpA2wUpvYNxg

Thread query: Polyaxon run failed error "PolyaxonClientException: unauthorized token expired"

TL;DR: Replace the expired credential and restart the client: Polyaxon rejected the credential as expired, so issue a fresh one for the user or service account, update where the run environment reads it, and retry the run submission. An expired credential fails every call identically. No run level change matters until the client presents a credential the server still accepts.