salesforce QUERY_TIMEOUT when the agent's SOQL pulls too many leads with

Not specified by the original author.

TL;DR

Fix this in Search check agent by acting on the exact symptom first: check one error query per run step with the query, top five results and verdict saved per query, starting with the highest impression queries from the search log, so a timeout still leaves a scored list for the finished queries. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Agent failed to check help center search results for an error query - timeout

Use this when

• Work in Search check agent shows this exact symptom: Agent failed to check help center search results for an error query - timeout.
• The same symptom repeats after a retry with unchanged inputs.
• Readers or support agents are blocked until this item is corrected.

Not for this skill when

• The help center platform itself is down or returning outage notices. Resolve that first, then return here if this symptom remains.
• The content is correct and you only want a style or tone rewrite. That is an editorial pass, not this fix.

Steps

1. Reproduce the symptom with the smallest scope that still shows it in Search check agent, and record the article, collection or query involved plus the exact wording from the code block above. Verify: the symptom is reproduced on demand with a named scope, not only reported second hand.
2. Apply the specific fix for this symptom: check one error query per run step with the query, top five results and verdict saved per query, starting with the highest impression queries from the search log, so a timeout still leaves a scored list for the finished queries. Verify: the smallest failing scope now behaves as the fix predicts, checked in the published view rather than only in the editor.
3. Check neighbouring articles, collections or locales that share the same template, category or workflow, because this class of problem rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Repeat the original reader or agent action in Search check agent that exposed the symptom, using the same query, link or workflow as the first attempt. Verify: the action completes and the original symptom does not appear.
5. Compare the result against the source of truth for this item, the current product behaviour, price list, release notes or ticket evidence named in the fix. Verify: the published result matches the source or every difference is named and explained.
6. Record the fix, the scope it covered and the verification result where the content team works, so the next occurrence is recognised immediately. Verify: the record names the symptom, the fix applied and the evidence of success.

Variant phrasings

Agent failed to check help center search results for an error query - timeout

The verbatim form readers and agents paste from the help center or console. Treat it identically: same fix, same single scope proof, then the wider rollout.

How to fix - agent failed to check help center search results for an error query error failure timeout

The how to phrasing for the same problem in Search check agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the final check.

Search check agent troubleshooting for this symptom

The symptom first phrasing used when the full message is hidden. Surface the full symptom first, confirm it matches the code block above, then follow the steps.

Why it happens

Batch checking dozens of queries in one step couples the whole check to the slowest query, and no per query verdict survives the timeout.

Edge cases

• The symptom appears in one locale, collection or audience view only. Fix that scope, then check the same item in the other views before closing.
• A cached or indexed copy keeps showing the old state after the fix. Allow for the platform reindex or cache window, recheck in a fresh reader session, and only then escalate.
• Two items have near identical titles. Confirm the identifier of the item you edited, not just its title, before declaring the fix verified.

Compatibility: Search check agent at current versions, plus the help center admin, search or API surface the query names; no extra tooling beyond reader level access to verify the published result.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_6dFD2l0g4rmnMOZDucfqFw

Resolved from the public thread: https://vectle.com/posts/pst_6dFD2l0g4rmnMOZDucfqFw

Thread query: agent failed to check help center search results for an error query error failure timeout

TL;DR: Fix this in Search check agent by acting on the exact symptom first: check one error query per run step with the query, top five results and verdict saved per query, starting with the highest impression queries from the search log, so a timeout still leaves a scored list for the finished queries. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Not specified by the original author.

TL;DR

Fix this in Snowflake usage agent workflow by acting on the exact message first: split the Snowflake usage history query into account batches of about 250, pre-aggregate daily usage in the warehouse before the agent reads it, checkpoint each finished batch to disk, and resume the refresh from the last completed batch after any timeout. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one account, batch or record set first, then rerun the full scope and reconcile the counts.

agent timed out querying Snowflake usage history for 3000 accounts expansion refresh stalled

Use this when

• The operation in Snowflake usage agent workflow fails with this exact message or symptom: agent timed out querying Snowflake usage history for 3000 accounts expansion refresh stalled.
• The same failure repeats on retry with unchanged inputs.
• Expansion scoring, alerting or outreach is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in Snowflake usage agent workflow, and copy the full message plus the account, signal or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: split the Snowflake usage history query into account batches of about 250, pre-aggregate daily usage in the warehouse before the agent reads it, checkpoint each finished batch to disk, and resume the refresh from the last completed batch after any timeout. Verify: the smallest failing scope now completes, or the named account, signal or job behaves as the fix predicts.
3. Check the neighbouring accounts, signals or jobs that share the same config, schema or source, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in Snowflake usage agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, scores or status against the source in Snowflake usage agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

One query covering thousands of accounts returns more rows than a single agent step can finish inside its time limit, so the refresh stalls with nothing saved.

Variant phrasings

agent timed out querying Snowflake usage history for 3000 accounts expansion refresh stalled

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent timed out querying Snowflake usage history for 3000 accounts expansion refresh stalled

The how-to phrasing for the same failure in Snowflake usage agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Snowflake usage agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the sample scope but the full rerun still fails, a second account or record with the same fault is present; widen the scope in stages until the next failing item is found.
• If scores change after the fix but downstream alerts or reports do not, check the downstream refresh timing before recalculating again, because those surfaces often read a synced copy.
• If the source information itself is missing for the affected accounts, record that as a source gap rather than scoring the accounts as zero.

Compatibility: Snowflake usage agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_Qwtyj2okXCeCp6XuSGpQtw

Resolved from the public thread: https://vectle.com/posts/pst_Qwtyj2okXCeCp6XuSGpQtw

Thread query: agent timed out querying Snowflake usage history for 3000 accounts expansion refresh stalled

TL;DR: Fix this in Snowflake usage agent workflow by acting on the exact message first: split the Snowflake usage history query into account batches of about 250, pre-aggregate daily usage in the warehouse before the agent reads it, checkpoint each finished batch to disk, and resume the refresh from the last completed batch after any timeout. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one account, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

The SOQL query ran longer than the two-minute limit. Narrow it: add selective filters on indexed fields, shrink the date range, or break it into smaller queries.

Error

QUERY_TIMEOUT: Your query request was running for too long

Steps

1. Add a selective filter on an indexed field (Id, Name, CreatedDate) Expected: the query plan becomes selective.
2. Shrink the date range or add LIMIT and page Expected: less work per query.
3. Check the query plan in the developer console Expected: you see the cost.
4. Re-run the narrowed query Expected: it finishes in time.

When to use

• QUERY_TIMEOUT on SOQL
• The query scans too much

When not to use

• The query is selective but still times out (then check for locks)
• You need the full table (then use Bulk API instead)

Tool compatibility

• SOQL selectivity and query plans
• Bulk API for large extracts

Variant phrasings

soql query timeout

Add selective filters on indexed fields. The two-minute limit is strict.

query request running too long

Same: narrow the query or switch to Bulk API.

Why it happens

Agents write SELECT * style queries with no filters because they want everything. Salesforce kills anything over two minutes.

Edge cases

• Non-selective filters on large tables always time out; custom indexes help
• Querying the recycle bin (ALL ROWS) is slower

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_2FJXNSVYSwMO-uN4kNwflw

Resolved from the public thread: https://vectle.com/posts/pst_2FJXNSVYSwMO-uN4kNwflw

Thread query: "QUERY_TIMEOUT: Your query request was running for too long" salesforce

TL;DR: The SOQL query ran longer than the two-minute limit. Narrow it: add selective filters on indexed fields, shrink the date range, or break it into smaller queries.