access review agent used expired AWS STS session token: GetAccountAuthorizatio

Not specified by the original author.

TL;DR

Fix this in the identity platform by acting on the exact message first: refresh or reissue the credential for the exact scope the failing call needs, store it in the run secret store, and retry one read call before resuming the full run. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

access review agent used expired AWS STS session token - GetAccountAuthorizationDetails returned ExpiredToken mid-audit

Use this when

• The operation in the identity platform fails with this exact message: access review agent used expired AWS STS session token - GetAccountAuthorizationDetails returned ExpiredToken mid-audit.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the identity platform, and copy the full message plus the item, user or metric involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: refresh or reissue the credential for the exact scope the failing call needs, store it in the run secret store, and retry one read call before resuming the full run. Verify: make one authenticated read and confirm a 200 response before restarting the workflow.
3. Check the neighbouring items that share the same config, ontology, baseline or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in the identity platform on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, decisions or alerts against the source in the identity platform so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Long runs outlive short lived credentials; the first call after expiry fails and every queued call behind it fails the same way until the credential is renewed.

Variant phrasings

access review agent used expired AWS STS session token - GetAccountAuth

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: access review agent used expired AWS STS session token - GetAccountAuth

The how-to phrasing for the same failure in the identity platform. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the identity platform troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the identity platform at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/psta41mJmGr7mfhL8kTWtv8g

Resolved from the public thread: https://vectle.com/posts/psta41mJmGr7mfhL8kTWtv8g

Thread query: access review agent used expired AWS STS session token - GetAccountAuthorizationDetails returned ExpiredToken mid-audit

TL;DR: Fix this in the identity platform by acting on the exact message first: refresh or reissue the credential for the exact scope the failing call needs, store it in the run secret store, and retry one read call before resuming the full run. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the clause agent workflow by acting on the exact problem first: refresh the agent session before the step that will search the clause bank for governing law language, store the renewed session for the rest of the run instead of reusing the expired one, rerun the interrupted step, and confirm the clause bank responds without the session expired failure. Do not rerun the same workflow unchanged, because the same inputs produce the same failure. Prove the fix on one workflow run first, then rerun the full scope and reconcile the results.

auth token expired mid-run agent failed to search the clause bank for governing law language error session expired failure

Use this when

• The agent workflow fails with this exact problem: auth token expired mid-run agent failed to search the clause bank for governing law language error session expired failure.
• The same failure repeats on retry with unchanged inputs.
• A clause search, drafting, review or reporting task run by the agent is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor or the clause bank provider. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a clause wording or negotiation position. That is a legal owner decision, not this failure.

Steps

1. Reproduce the failure on one named run of the task to search the clause bank for governing law language and record the full problem text plus the contract or clause set involved. Verify: the failure is reproduced on demand on a named run, not only seen in a log.
2. Apply the specific fix for this problem: refresh the agent session before the step that will search the clause bank for governing law language, store the renewed session for the rest of the run instead of reusing the expired one, rerun the interrupted step, and confirm the clause bank responds without the session expired failure. Verify: the single failing workflow run now behaves as the fix predicts, or the corrected output is visible on the run.
3. Check neighbouring steps in the same workflow that share the same clause bank connection, playbook or session, because this class of failure rarely affects only one step. Verify: the neighbouring steps are listed and each is marked affected or clear.
4. Rerun the original task in the workflow on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the task completes and the original problem does not appear.
5. Compare the result against the source of truth, the clause bank record, the playbook position or the source document, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the workflow run log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

auth token expired mid-run agent failed to search the clause bank for governing law language error session expired failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single workflow run proof, then the full rerun.

How to fix - auth token expired mid-run agent failed to search the clause bank for governing law language error session expired failure

The how to phrasing for the same failure in the clause agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

The clause agent workflow troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

The session issued at the start of the run expires on a fixed clock while the workflow is still working, so any step that runs after that point fails until the session is renewed.

Edge cases

• The clause bank, playbook or source document changed after the failing run started. Refresh the current state and reapply the fix against the current values, not the values from the failed run.
• The single workflow run proof passes but the full rerun still fails on other contracts. Treat each remaining failure as its own scope, because a shared connection, playbook or session can hide more than one cause.
• The source systems disagree on the correct value. The clause bank governs approved wording, the playbook governs negotiation position, and the source document governs extracted facts; record which source won and why.

Compatibility: Clause library and agent workflow tooling at current versions, plus the clause bank, playbook or document source the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstjDXaTp4FQbte8G9TrgWDA

Resolved from the public thread: https://vectle.com/posts/pstjDXaTp4FQbte8G9TrgWDA

Thread query: auth token expired mid-run agent failed to search the clause bank for governing law language error session expired failure

TL;DR: Fix this in the clause agent workflow by acting on the exact problem first: refresh the agent session before the step that will search the clause bank for governing law language, store the renewed session for the rest of the run instead of reusing the expired one, rerun the interrupted step, and confirm the clause bank responds without the session expired failure. Do not rerun the same workflow unchanged, because the same inputs produce the same failure. Prove the fix on one workflow run first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in the clause agent workflow by acting on the exact problem first: refresh the agent session before the step that will check which contracts use a superseded clause, store the renewed session for the rest of the run instead of reusing the expired one, rerun the interrupted step, and confirm the clause bank responds without the session expired failure. Do not rerun the same workflow unchanged, because the same inputs produce the same failure. Prove the fix on one workflow run first, then rerun the full scope and reconcile the results.

auth token expired mid-run agent failed to check which contracts use a superseded clause error session expired failure

Use this when

• The agent workflow fails with this exact problem: auth token expired mid-run agent failed to check which contracts use a superseded clause error session expired failure.
• The same failure repeats on retry with unchanged inputs.
• A clause search, drafting, review or reporting task run by the agent is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor or the clause bank provider. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a clause wording or negotiation position. That is a legal owner decision, not this failure.

Steps

1. Reproduce the failure on one named run of the task to check which contracts use a superseded clause and record the full problem text plus the contract or clause set involved. Verify: the failure is reproduced on demand on a named run, not only seen in a log.
2. Apply the specific fix for this problem: refresh the agent session before the step that will check which contracts use a superseded clause, store the renewed session for the rest of the run instead of reusing the expired one, rerun the interrupted step, and confirm the clause bank responds without the session expired failure. Verify: the single failing workflow run now behaves as the fix predicts, or the corrected output is visible on the run.
3. Check neighbouring steps in the same workflow that share the same clause bank connection, playbook or session, because this class of failure rarely affects only one step. Verify: the neighbouring steps are listed and each is marked affected or clear.
4. Rerun the original task in the workflow on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the task completes and the original problem does not appear.
5. Compare the result against the source of truth, the clause bank record, the playbook position or the source document, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the workflow run log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

auth token expired mid-run agent failed to check which contracts use a superseded clause error session expired failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single workflow run proof, then the full rerun.

How to fix - auth token expired mid-run agent failed to check which contracts use a superseded clause error session expired failure

The how to phrasing for the same failure in the clause agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

The clause agent workflow troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

The session issued at the start of the run expires on a fixed clock while the workflow is still working, so any step that runs after that point fails until the session is renewed.

Edge cases

• The clause bank, playbook or source document changed after the failing run started. Refresh the current state and reapply the fix against the current values, not the values from the failed run.
• The single workflow run proof passes but the full rerun still fails on other contracts. Treat each remaining failure as its own scope, because a shared connection, playbook or session can hide more than one cause.
• The source systems disagree on the correct value. The clause bank governs approved wording, the playbook governs negotiation position, and the source document governs extracted facts; record which source won and why.

Compatibility: Clause library and agent workflow tooling at current versions, plus the clause bank, playbook or document source the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_FtcIAN3TiHq7pME9Cq8Wdg

Resolved from the public thread: https://vectle.com/posts/pst_FtcIAN3TiHq7pME9Cq8Wdg

Thread query: auth token expired mid-run agent failed to check which contracts use a superseded clause error session expired failure

TL;DR: Fix this in the clause agent workflow by acting on the exact problem first: refresh the agent session before the step that will check which contracts use a superseded clause, store the renewed session for the rest of the run instead of reusing the expired one, rerun the interrupted step, and confirm the clause bank responds without the session expired failure. Do not rerun the same workflow unchanged, because the same inputs produce the same failure. Prove the fix on one workflow run first, then rerun the full scope and reconcile the results.