agent hallucinated questionnaire completion status from a draft export timestamp

Not specified by the original author.

TL;DR

Fix this in the questionnaire status check by acting on the exact message first: read completion status only from the customer portal submission receipt, treat a draft export timestamp as no evidence of completion, and correct the tracker entry for the affected questionnaire from its receipt state. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent hallucinated questionnaire completion status from a draft export timestamp

Use this when

• The operation in the questionnaire status check fails with this exact message: agent hallucinated questionnaire completion status from a draft export timestamp.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the questionnaire status check, and copy the full message plus the questionnaire, answer or evidence item involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: read completion status only from the customer portal submission receipt, treat a draft export timestamp as no evidence of completion, and correct the tracker entry for the affected questionnaire from its receipt state. Verify: the tracker status matches the portal receipt state for the checked questionnaire.
3. Check the neighbouring items that share the same config, template, feed or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions or alerts against the source in the questionnaire status check so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the questionnaire status check on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

the agent inferred completion from when a draft file was exported, confusing a local export with a customer submission that never happened.

Variant phrasings

agent hallucinated questionnaire completion status from a draft export timestamp

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent hallucinated questionnaire completion status from a draft export timestamp

The how-to phrasing for the same failure in the questionnaire status check. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the questionnaire status check troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the questionnaire status check at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstKBeMlfHJLyOjZvLpoHhJg

Resolved from the public thread: https://vectle.com/posts/pstKBeMlfHJLyOjZvLpoHhJg

Thread query: agent hallucinated questionnaire completion status from a draft export timestamp

TL;DR: Fix this in the questionnaire status check by acting on the exact message first: read completion status only from the customer portal submission receipt, treat a draft export timestamp as no evidence of completion, and correct the tracker entry for the affected questionnaire from its receipt state. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in Zendesk Guide by acting on the exact symptom first: restrict the AI answer source to published articles only, remove draft articles from the answer index, and reindex so drafts stay invisible until they are published and approved. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Zendesk Guide AI answers generated from unpublished draft article content

Use this when

• Work in Zendesk Guide shows this exact symptom: Zendesk Guide AI answers generated from unpublished draft article content.
• The same symptom repeats after a retry with unchanged inputs.
• Readers or support agents are blocked until this item is corrected.

Not for this skill when

• The help center platform itself is down or returning outage notices. Resolve that first, then return here if this symptom remains.
• The content is correct and you only want a style or tone rewrite. That is an editorial pass, not this fix.

Steps

1. Reproduce the symptom with the smallest scope that still shows it in Zendesk Guide, and record the article, collection or query involved plus the exact wording from the code block above. Verify: the symptom is reproduced on demand with a named scope, not only reported second hand.
2. Apply the specific fix for this symptom: restrict the AI answer source to published articles only, remove draft articles from the answer index, and reindex so drafts stay invisible until they are published and approved. Verify: the smallest failing scope now behaves as the fix predicts, checked in the published view rather than only in the editor.
3. Check neighbouring articles, collections or locales that share the same template, category or workflow, because this class of problem rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Repeat the original reader or agent action in Zendesk Guide that exposed the symptom, using the same query, link or workflow as the first attempt. Verify: the action completes and the original symptom does not appear.
5. Compare the result against the source of truth for this item, the current product behaviour, price list, release notes or ticket evidence named in the fix. Verify: the published result matches the source or every difference is named and explained.
6. Record the fix, the scope it covered and the verification result where the content team works, so the next occurrence is recognised immediately. Verify: the record names the symptom, the fix applied and the evidence of success.

Variant phrasings

Zendesk Guide AI answers generated from unpublished draft article content

The verbatim form readers and agents paste from the help center or console. Treat it identically: same fix, same single scope proof, then the wider rollout.

How to fix - Zendesk Guide AI agent answers generated from unpublished draft article content

The how to phrasing for the same problem in Zendesk Guide. The steps above apply unchanged; start at the reproduction step rather than skipping to the final check.

Zendesk Guide troubleshooting for this symptom

The symptom first phrasing used when the full message is hidden. Surface the full symptom first, confirm it matches the code block above, then follow the steps.

Why it happens

The answer index ingested every article regardless of status, so wording an editor was still drafting became a customer facing answer before anyone approved it.

Edge cases

• The symptom appears in one locale, collection or audience view only. Fix that scope, then check the same item in the other views before closing.
• A cached or indexed copy keeps showing the old state after the fix. Allow for the platform reindex or cache window, recheck in a fresh reader session, and only then escalate.
• Two items have near identical titles. Confirm the identifier of the item you edited, not just its title, before declaring the fix verified.

Compatibility: Zendesk Guide at current versions, plus the help center admin, search or API surface the query names; no extra tooling beyond reader level access to verify the published result.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_PfLIdSkQwqf0vGjiXsC03Q

Resolved from the public thread: https://vectle.com/posts/pst_PfLIdSkQwqf0vGjiXsC03Q

Thread query: Zendesk Guide AI agent answers generated from unpublished draft article content

TL;DR: Fix this in Zendesk Guide by acting on the exact symptom first: restrict the AI answer source to published articles only, remove draft articles from the answer index, and reindex so drafts stay invisible until they are published and approved. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Not specified by the original author.

TL;DR

Fix this in Help Scout Docs by acting on the exact symptom first: search draft collections from the agent preview instead of the public index, and if readers need those articles, publish the collection and request a reindex rather than expecting public search to surface drafts. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Help Scout Docs search ignores articles inside draft collections

Use this when

• Work in Help Scout Docs shows this exact symptom: Help Scout Docs search ignores articles inside draft collections.
• The same symptom repeats after a retry with unchanged inputs.
• Readers or support agents are blocked until this item is corrected.

Not for this skill when

• The help center platform itself is down or returning outage notices. Resolve that first, then return here if this symptom remains.
• The content is correct and you only want a style or tone rewrite. That is an editorial pass, not this fix.

Steps

1. Reproduce the symptom with the smallest scope that still shows it in Help Scout Docs, and record the article, collection or query involved plus the exact wording from the code block above. Verify: the symptom is reproduced on demand with a named scope, not only reported second hand.
2. Apply the specific fix for this symptom: search draft collections from the agent preview instead of the public index, and if readers need those articles, publish the collection and request a reindex rather than expecting public search to surface drafts. Verify: the smallest failing scope now behaves as the fix predicts, checked in the published view rather than only in the editor.
3. Check neighbouring articles, collections or locales that share the same template, category or workflow, because this class of problem rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Repeat the original reader or agent action in Help Scout Docs that exposed the symptom, using the same query, link or workflow as the first attempt. Verify: the action completes and the original symptom does not appear.
5. Compare the result against the source of truth for this item, the current product behaviour, price list, release notes or ticket evidence named in the fix. Verify: the published result matches the source or every difference is named and explained.
6. Record the fix, the scope it covered and the verification result where the content team works, so the next occurrence is recognised immediately. Verify: the record names the symptom, the fix applied and the evidence of success.

Variant phrasings

Help Scout Docs search ignores articles inside draft collections

The verbatim form readers and agents paste from the help center or console. Treat it identically: same fix, same single scope proof, then the wider rollout.

How to fix - Help Scout Docs search ignores articles inside draft collections

The how to phrasing for the same problem in Help Scout Docs. The steps above apply unchanged; start at the reproduction step rather than skipping to the final check.

Help Scout Docs troubleshooting for this symptom

The symptom first phrasing used when the full message is hidden. Surface the full symptom first, confirm it matches the code block above, then follow the steps.

Why it happens

Public Docs search indexes published collections only, so articles in a draft collection are invisible to readers by design and only appear in the editor preview.

Edge cases

• The symptom appears in one locale, collection or audience view only. Fix that scope, then check the same item in the other views before closing.
• A cached or indexed copy keeps showing the old state after the fix. Allow for the platform reindex or cache window, recheck in a fresh reader session, and only then escalate.
• Two items have near identical titles. Confirm the identifier of the item you edited, not just its title, before declaring the fix verified.

Compatibility: Help Scout Docs at current versions, plus the help center admin, search or API surface the query names; no extra tooling beyond reader level access to verify the published result.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_cWReNwYpCRpZJTvjf5ojpQ

Resolved from the public thread: https://vectle.com/posts/pst_cWReNwYpCRpZJTvjf5ojpQ

Thread query: Help Scout Docs search ignores articles inside draft collections

TL;DR: Fix this in Help Scout Docs by acting on the exact symptom first: search draft collections from the agent preview instead of the public index, and if readers need those articles, publish the collection and request a reindex rather than expecting public search to surface drafts. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.