synthetic agent timed out running privacy evaluation on a large generat

Not specified by the original author.

TL;DR

Fix this in synthetic data agent workflow by acting on the exact message first: run the privacy evaluation in batches by column group, start with sampled nearest neighbour checks on a stated number of rows, save each batch result, and expand to the full dataset only for the metrics the sampled pass flags, reporting which metrics ran in full and which ran sampled. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

agent timed out running privacy evaluation on a large generated dataset

Use this when

• The operation in synthetic data agent workflow fails with this exact message or symptom: agent timed out running privacy evaluation on a large generated dataset.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in synthetic data agent workflow, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: run the privacy evaluation in batches by column group, start with sampled nearest neighbour checks on a stated number of rows, save each batch result, and expand to the full dataset only for the metrics the sampled pass flags, reporting which metrics ran in full and which ran sampled. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in synthetic data agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in synthetic data agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Distance based privacy metrics grow much faster than the dataset size, so a full evaluation inside one agent step times out on large generated data that a batched and sampled pass assesses reliably.

Variant phrasings

agent timed out running privacy evaluation on a large generated dataset

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - synthetic agent timed out running privacy evaluation on a large generated dataset

The how-to phrasing for the same failure in synthetic data agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

synthetic data agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: synthetic data agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstbi3kHveuB7Q9JxK9FfPhQ

Resolved from the public thread: https://vectle.com/posts/pstbi3kHveuB7Q9JxK9FfPhQ

Thread query: synthetic agent timed out running privacy evaluation on a large generated dataset

TL;DR: Fix this in synthetic data agent workflow by acting on the exact message first: run the privacy evaluation in batches by column group, start with sampled nearest neighbour checks on a stated number of rows, save each batch result, and expand to the full dataset only for the metrics the sampled pass flags, reporting which metrics ran in full and which ran sampled. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in synthetic data agent workflow by acting on the exact message first: replace full pairwise privacy checks with sampled distance checks first, compute nearest neighbour distances in batches saved to disk, and widen to the full check only for the columns the sampled check flags. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

agent timed out validating synthetic data privacy

Use this when

• The operation in synthetic data agent workflow fails with this exact message or symptom: agent timed out validating synthetic data privacy.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in synthetic data agent workflow, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: replace full pairwise privacy checks with sampled distance checks first, compute nearest neighbour distances in batches saved to disk, and widen to the full check only for the columns the sampled check flags. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in synthetic data agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in synthetic data agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Pairwise distance privacy metrics scale quadratically, so a full check inside one agent step times out on datasets that sampled checks assess reliably.

Variant phrasings

agent timed out validating synthetic data privacy

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent timed out when agent tried to validate synthetic data privacy error timeout failure

The how-to phrasing for the same failure in synthetic data agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

synthetic data agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: synthetic data agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstfQPLIKAWrGQS8HqDd02fg

Resolved from the public thread: https://vectle.com/posts/pstfQPLIKAWrGQS8HqDd02fg

Thread query: agent timed out when agent tried to validate synthetic data privacy error timeout failure

TL;DR: Fix this in synthetic data agent workflow by acting on the exact message first: replace full pairwise privacy checks with sampled distance checks first, compute nearest neighbour distances in batches saved to disk, and widen to the full check only for the columns the sampled check flags. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in DSR search agent by acting on the exact problem first: search the tables in priority batches using the data map, starting with tables that hold direct identifiers, save the result for each table as it finishes, and resume from the first unsearched table after any timeout. Do not rerun the whole job or request unchanged, because the same inputs produce the same failure. Prove the fix on one request, system or batch first, then rerun the full scope and reconcile the counts.

agent timed out searching Snowflake and BigQuery for one requester across 80 tables

Use this when

• The operation in DSR search agent fails with this exact message or symptom: agent timed out searching Snowflake and BigQuery for one requester across 80 tables.
• The same failure repeats on retry with unchanged inputs.
• A privacy request, export, deletion or deadline is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a legal interpretation or a policy choice. That is a privacy team decision, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in DSR search agent, and copy the full message plus the request, system or record involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: search the tables in priority batches using the data map, starting with tables that hold direct identifiers, save the result for each table as it finishes, and resume from the first unsearched table after any timeout. Verify: the smallest failing scope now completes, or the named request, system or record behaves as the fix predicts.
3. Check the neighbouring requests, systems or records that share the same connector, mapping or owner, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in DSR search agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in DSR search agent so a silent partial success is caught before the request is closed. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the request so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

Eighty tables searched in one pass makes the slowest table kill the whole request, while the data map already ranks which tables matter most for one requester.

Variant phrasings

agent timed out searching Snowflake and BigQuery for one requester across 80 tables

The verbatim form searchers paste from the console, queue or request tracker. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent timed out searching Snowflake and BigQuery for one requester across 80 tables

The how to phrasing for the same failure in DSR search agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

DSR search agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different system, treat that system as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If personal data was already sent to the wrong place or a notice was already sent early, record the incident for privacy assessment first, then apply the fix, and note the affected request in the run record.
• If a legal hold or a verification question is in play, pause deletion or delivery for that request only, resolve the hold or verification, and keep other requests moving.

Compatibility: DSR search agent at current versions, plus the admin console or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_unGLWUkrkI9N6pZ06jz2Wg

Resolved from the public thread: https://vectle.com/posts/pst_unGLWUkrkI9N6pZ06jz2Wg

Thread query: agent timed out searching Snowflake and BigQuery for one requester across 80 tables

TL;DR: Fix this in DSR search agent by acting on the exact problem first: search the tables in priority batches using the data map, starting with tables that hold direct identifiers, save the result for each table as it finishes, and resume from the first unsearched table after any timeout. Do not rerun the whole job or request unchanged, because the same inputs produce the same failure. Prove the fix on one request, system or batch first, then rerun the full scope and reconcile the counts.