agent stuck loop detected repeating the same step while trying to fill

Not specified by the original author.

TL;DR

Fix this in the agent workflow by acting on the exact problem first: break the loop by forcing a state change, mark the current step complete or failed explicitly instead of leaving it pending, route the work on to the next step after the task to fill counterparty details into an NDA template, and watch the run log to confirm no step repeats. Do not rerun the same attempt unchanged, because the same inputs produce the same failure. Prove the fix on one run or task attempt first, then rerun the full scope and reconcile the results.

agent stuck loop detected repeating the same step while trying to fill counterparty details into an NDA template error failure

Use this when

• The operation in the agent workflow fails with this exact problem: agent stuck loop detected repeating the same step while trying to fill counterparty details into an NDA template error failure.
• The same failure repeats on retry with unchanged inputs.
• An NDA task, counterparty step or repository filing is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The agent completes the task and you only disagree with the output wording or a legal judgement in the document. That is a legal owner decision, not this failure.

Steps

1. Reproduce the failure using one run or task attempt in the agent workflow and record the full problem text plus the record, signer or run involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: break the loop by forcing a state change, mark the current step complete or failed explicitly instead of leaving it pending, route the work on to the next step after the task to fill counterparty details into an NDA template, and watch the run log to confirm no step repeats. Verify: the single failing scope now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring records, templates or runs that share the same settings, template or schedule, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in the agent workflow on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the executed NDA, the counterparty record or the repository entry, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the workflow log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent stuck loop detected repeating the same step while trying to fill counterparty details into an NDA template error failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same step while trying to fill counterparty details into an NDA template error failure

The how to phrasing for the same failure in the agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Agent workflow troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

The agent repeats a step when the step result is not written back as state, so the planner sees the same unfinished task on every pass and selects it again.

Edge cases

• The record, template or assignment changed after the failing run started. Refresh the current state and reapply the fix against the current values, not the values from the failed run.
• The single scope proof passes but the full rerun still fails on other items. Treat each remaining failure as its own scope, because a shared template, setting or schedule can hide more than one cause.
• The source systems disagree on the correct value. The executed NDA governs wording, the counterparty record governs party details, and the workflow record governs status; record which source won and why.

Compatibility: current agent runtimes and the NDA, signature and repository tools the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstc4oi2JR6wpoOhtgXXi9Pg

Resolved from the public thread: https://vectle.com/posts/pstc4oi2JR6wpoOhtgXXi9Pg

Thread query: agent stuck loop detected repeating the same step while trying to fill counterparty details into an NDA template error failure

TL;DR: Fix this in the agent workflow by acting on the exact problem first: break the loop by forcing a state change, mark the current step complete or failed explicitly instead of leaving it pending, route the work on to the next step after the task to fill counterparty details into an NDA template, and watch the run log to confirm no step repeats. Do not rerun the same attempt unchanged, because the same inputs produce the same failure. Prove the fix on one run or task attempt first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in Coupa onboarding agent by acting on the exact problem first: record the step the agent last completed with the supplier identifier it produced, check that record before running any onboarding step, break the loop after one repeated step with no state change, and make the agent continue from the first step that has no saved result. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one vendor first, then rerun the full scope and reconcile the results.

agent stuck loop detected repeating the same step while trying to onboard a new supplier in Coupa

Use this when

• The operation in Coupa onboarding agent fails with this exact problem: agent stuck loop detected repeating the same step while trying to onboard a new supplier in Coupa.
• The same failure repeats on retry with unchanged inputs.
• A vendor onboarding, payment setup, screening or vendor record step is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor of the tool. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a commercial decision such as price or terms. That is a negotiation, not this failure.

Steps

1. Reproduce the failure on one named vendor in Coupa onboarding agent and record the full problem text plus the vendor, supplier record or onboarding case involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: record the step the agent last completed with the supplier identifier it produced, check that record before running any onboarding step, break the loop after one repeated step with no state change, and make the agent continue from the first step that has no saved result. Verify: the single failing vendor now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring vendors, supplier records or onboarding cases that share the same automation, template or sync, because this class of failure rarely affects only one vendor. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in Coupa onboarding agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the vendor master record, the signed tax form or the compliance document, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the vendor record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent stuck loop detected repeating the same step while trying to onboard a new supplier in Coupa

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single vendor proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same step while trying to onboard a new supplier in Coupa error failure

The how to phrasing for the same failure in Coupa onboarding agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Coupa onboarding agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

The agent repeats a step because its completion check looks in a different place than the step writes to, so it never sees its own work and retries the same step until a shared saved state is checked.

Edge cases

• The vendor was merged, renamed or given new banking details after the failing run started. Refresh the vendor state and reapply the fix against the current values, not the values from the failed run.
• The single vendor proof passes but the full rerun still fails on other vendors. Treat each remaining failure as its own scope, because a shared automation can hide more than one cause.
• The source systems disagree on the correct value. The vendor master record governs identity and payment details, the signed tax document governs classification and withholding, and the compliance screening governs approval status; record which source won and why.

Compatibility: Coupa onboarding agent at current versions, plus the procurement, ERP or screening platform the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstGS0SbRt3Ko-SAfCvEI3wA

Resolved from the public thread: https://vectle.com/posts/pstGS0SbRt3Ko-SAfCvEI3wA

Thread query: agent stuck loop detected repeating the same step while trying to onboard a new supplier in Coupa error failure

TL;DR: Fix this in Coupa onboarding agent by acting on the exact problem first: record the step the agent last completed with the supplier identifier it produced, check that record before running any onboarding step, break the loop after one repeated step with no state change, and make the agent continue from the first step that has no saved result. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one vendor first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in handbook answer agent by acting on the exact problem first: record each handbook page already searched in a run file, check that file before searching a page again, break out after a repeat page, and answer from the best page found so far with its limits stated instead of searching in a circle. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.

agent stuck loop detected repeating the same step while trying to answer a new hire question from the handbook error failure

Use this when

• The operation in handbook answer agent fails with this exact problem: agent stuck loop detected repeating the same step while trying to answer a new hire question from the handbook error failure.
• The same failure repeats on retry with unchanged inputs.
• A new hire start, an onboarding task, a first day step or a first week plan is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with an HR policy call such as eligibility or a start date decision. That is a people team decision, not this failure.

Steps

1. Reproduce the failure on one named hire or task in handbook answer agent and record the full problem text plus the hire, task or start date involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: record each handbook page already searched in a run file, check that file before searching a page again, break out after a repeat page, and answer from the best page found so far with its limits stated instead of searching in a circle. Verify: the single failing hire or task now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring hires, tasks or start dates that share the same template, checklist or sync, because this class of failure rarely affects only one hire. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in handbook answer agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the HRIS hire record, the signed offer or the current handbook page, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the onboarding log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent stuck loop detected repeating the same step while trying to answer a new hire question from the handbook error failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single hire proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same step while trying to answer a new hire question from the handbook error failure

The how to phrasing for the same failure in handbook answer agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

handbook answer agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

The agent loops because it reads its progress from a result view that updates after its check, so a searched page looks unsearched forever until progress is recorded where its own check looks.

Edge cases

• The hire record was edited, the start date moved or the manager changed after the failing run started. Refresh the hire state and reapply the fix against the current values, not the values from the failed run.
• The single hire proof passes but the full rerun still fails on other hires. Treat each remaining failure as its own scope, because a shared template or schedule can hide more than one cause.
• The source systems disagree on the correct value. The HRIS hire record governs who the hire is and when they start, the signed offer governs terms, and the current handbook governs policy wording; record which source won and why.

Compatibility: handbook answer agent at current versions, plus the HRIS, handbook or onboarding tool the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstMfXLvoqk2EBf_3EX7FjAg

Resolved from the public thread: https://vectle.com/posts/pstMfXLvoqk2EBf_3EX7FjAg

Thread query: agent stuck loop detected repeating the same step while trying to answer a new hire question from the handbook error failure

TL;DR: Fix this in handbook answer agent by acting on the exact problem first: record each handbook page already searched in a run file, check that file before searching a page again, break out after a repeat page, and answer from the best page found so far with its limits stated instead of searching in a circle. Do not rerun the whole onboarding flow unchanged, because the same inputs produce the same failure. Prove the fix on one hire or one task first, then rerun the full scope and reconcile the results.