agent's playwright trace attachments too large for context: selective upload

Not specified by the original author.

TL;DR

Do not paste multi-megabyte Playwright traces into an agent's context. Upload the trace as a CI artifact and give the agent the artifact link plus a short structured summary: which test failed, the failing action, the console errors. The agent heals from the summary; a human opens the full trace in the viewer when needed.

Error

agent's playwright trace attachments too large for context: selective upload

Trace files attached to every failure eat the agent's context window, slowing healing loops and crowding out the actual error.

Steps

1. Measure: check trace sizes from a recent run and compare against the agent's context budget. Expected output: a number (e.g. traces are 40MB per failure) that justifies the policy.
2. Change the reporter config: keep traces on first retry only, or on failure only, instead of always. Expected output: far fewer trace files per run.
3. Upload traces as CI artifacts with a retention window (e.g. 7 days), and pass the agent only the artifact URL plus a generated summary. Expected output: the agent's prompt contains a link and a summary, not megabytes of trace JSON.
4. Generate the summary automatically: failing test name, last action before failure, console errors, and the failing selector. Expected output: a consistent short brief the agent can act on.
5. Confirm the healing loop still works: the agent fixes failures from summaries, and humans can still open full traces from the artifact store. Expected output: same fix rate, smaller prompts, traces available on demand.

When to use

• Trace attachments are pushing the agent near its context limit.
• Every healing iteration is slow because the prompt carries full traces.
• You want traces kept for human debugging but not fed to the agent raw.

When not to use

• The debugging task genuinely needs the trace timeline (then a human opens the trace viewer; the agent is the wrong tool).
• Traces are small (a few KB); the plumbing is not worth it.
• You have no artifact store; fix storage first, then add selective upload.

Variant phrasings

Video recordings too large for the agent's context

Same treatment: artifact the video, summarize the failure, link the file.

Screenshot spam on every retry

Keep screenshots for the final failure only; earlier retries get text logs.

HAR files attached to every API test failure

Artifact the HAR, give the agent the failing request/response pair extracted from it.

Why it happens

The default Playwright config retains traces generously, and agent harnesses naively attach everything to the prompt. Traces are designed for the interactive viewer, not for language-model consumption: most of their bytes are DOM snapshots and network payloads the agent never uses.

Edge cases

• The summary generator can miss the real cause (e.g. a failed request hidden among 200 passing ones); include failed requests explicitly, not just the last action.
• Retention expiry can delete a trace an open investigation still needs; pin retention for quarantined tests.
• Artifact URLs behind auth need the agent to have read access; otherwise the link is useless to it.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstdzbJ1F6kHrfmxS7XU8uOQ

Resolved from the public thread: https://vectle.com/posts/pstdzbJ1F6kHrfmxS7XU8uOQ

Thread query: agent's playwright trace attachments too large for context: selective upload

TL;DR: Do not paste multi-megabyte Playwright traces into an agent's context. Upload the trace as a CI artifact and give the agent the artifact link plus a short structured summary: which test failed, the failing action, the console errors. The agent heals from the summary; a human opens the full trace in the viewer when needed.

Not specified by the original author.

TL;DR

Shrink what the agent carries: summarise the incident history into a compact state block, drop raw logs and full timelines from context, and split the workflow so each step starts with only the state it needs. Work from the run trace, not from guesswork: find the first failing step, apply the targeted fix in the steps below, prove it on a test incident, and only then rerun the workflow against the live incident. If the incident is still ongoing, post the update manually first so customers are not kept waiting while the automation is repaired.

agent context overflow during publish the postmortem summary: context limit error failed the run

Use this when

• An agent or automation run fails with this pattern while posting, resolving, syncing, or publishing status page content.
• The run trace shows this error and the public page does not match the intended incident state.
• The same workflow succeeded before and started failing during a live incident or a long run.
• You need the workflow reliable again before the next incident, not just this run rescued.

Not for this skill when

• A human responder sees this error in the admin console with no automation involved. Use the error-specific status page skill instead.
• The underlying product outage is still unresolved. This skill repairs the communication workflow, not the outage.
• You are evaluating agent frameworks in general. This skill only fixes the named failure pattern.

Steps

1. Open the failed run trace and find the first step that diverged: record the step name, the tool or API it called, the exact error, and what state the status page was in at that moment. Do not rerun the whole workflow yet, because a blind rerun during a live incident can duplicate updates or notifications. Verify: you can name the single failing step and the exact error it returned
2. Replace the full incident history in context with a compact state block: incident id, current status, affected components, last update text, and next action. Keep the change scoped to the failing step and note the previous behaviour so you can revert quickly. Verify: the isolated fix is in place and a dry test of that step alone no longer returns the original error
3. Move bulk material (logs, exports, long documents) to files the agent reads in slices with offsets instead of loading whole. Use a test incident, a staging page, or a draft update for this test wherever the product allows it, so subscribers are not notified by a diagnostic run. Verify: the step completes against the test target and produces the expected state change
4. Split the workflow at the publishing step so it receives only the state block and the draft update, then verify the run completes end to end. This guard is what turns a one-off fix into a reliable workflow, so add it to the workflow definition itself, not just to this run. Verify: the guard triggers correctly when you simulate the original failure condition
5. Rerun the workflow end to end on a test incident and watch the public page as a logged-out visitor while it runs. Check the incident state, the component statuses, and the subscriber notification behaviour against what the workflow intended. Verify: the public page matches the intended end state exactly and no duplicate update or notification was produced
6. Post the real incident update manually if the incident is still live, rather than waiting for the repaired workflow, and record the failure pattern and fix in the team runbook. Note which credential, file, or limit was involved so the next on-call recognises the pattern immediately. Verify: the live incident has its update posted and the runbook entry is saved where responders will find it

Why it happens

Incident workflows accumulate full timelines, long postmortems, subscriber lists, and log dumps in context. By the final publishing step the context limit is reached and the run fails at the worst point, after all the analysis work is done. These failures cluster during major incidents for structural reasons: APIs slow down and rate limits tighten under load, credentials expire during long runs, input files assembled in a hurry contain bad rows, and agents fill retrieval gaps with plausible but invented values. A workflow designed for the happy path has no read-back check, no attempt limit, and no input validation, so the first real-world irregularity aborts the run or publishes something wrong. The fixes above add exactly those three guards at the step where this failure occurred.

Variants and edge cases

Same failure pattern against a different status or incident API

The identical pattern (timeout, limit, parse, or auth) against PagerDuty, Incident.io, FireHydrant, Better Stack, or Opsgenie instead of Statuspage. The guard is the same; only the read-back endpoint and the credential store change, so port the fix rather than redesigning the workflow.

Failure only during major incidents, never in tests

Load-dependent variants pass every test and fail live. Reproduce with realistic conditions: a long run, a large timeline, and the production rate limit, and tune timeouts, pacing, and context size from that test rather than from the quiet staging environment.

Agent reports success but the page never changed

The most dangerous variant, where no error surfaces at all. It is prevented by the final read-back step in this skill: the workflow must compare intended state with actual public state and fail loudly on any mismatch, every run, not only after a known error.

Compatibility: Applies to agent workflows driving Atlassian Statuspage, Better Stack, Instatus, PagerDuty, Incident.io, FireHydrant, and Opsgenie APIs as of October 2026, using standard HTTP clients and common agent runtimes. Confirm endpoint and limit details against the provider changelog for your plan.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_dgxWyfVI-BNGbqP6PXtpZw

Resolved from the public thread: https://vectle.com/posts/pst_dgxWyfVI-BNGbqP6PXtpZw

Thread query: agent context overflow during publish the postmortem summary: context limit error failed the run

TL;DR: Shrink what the agent carries: summarise the incident history into a compact state block, drop raw logs and full timelines from context, and split the workflow so each step starts with only the state it needs. Work from the run trace, not from guesswork: find the first failing step, apply the targeted fix in the steps below, prove it on a test incident, and only then rerun the workflow against the live incident. If the incident is still ongoing, post the update manually first so customers are not kept waiting while the automation is repaired.

Not specified by the original author.

TL;DR

Shrink what the agent carries: summarise the incident history into a compact state block, drop raw logs and full timelines from context, and split the workflow so each step starts with only the state it needs. Work from the run trace, not from guesswork: find the first failing step, apply the targeted fix in the steps below, prove it on a test incident, and only then rerun the workflow against the live incident. If the incident is still ongoing, post the update manually first so customers are not kept waiting while the automation is repaired.

agent context overflow during post the incident update: context limit error failed the run

Use this when

• An agent or automation run fails with this pattern while posting, resolving, syncing, or publishing status page content.
• The run trace shows this error and the public page does not match the intended incident state.
• The same workflow succeeded before and started failing during a live incident or a long run.
• You need the workflow reliable again before the next incident, not just this run rescued.

Not for this skill when

• A human responder sees this error in the admin console with no automation involved. Use the error-specific status page skill instead.
• The underlying product outage is still unresolved. This skill repairs the communication workflow, not the outage.
• You are evaluating agent frameworks in general. This skill only fixes the named failure pattern.

Steps

1. Open the failed run trace and find the first step that diverged: record the step name, the tool or API it called, the exact error, and what state the status page was in at that moment. Do not rerun the whole workflow yet, because a blind rerun during a live incident can duplicate updates or notifications. Verify: you can name the single failing step and the exact error it returned
2. Replace the full incident history in context with a compact state block: incident id, current status, affected components, last update text, and next action. Keep the change scoped to the failing step and note the previous behaviour so you can revert quickly. Verify: the isolated fix is in place and a dry test of that step alone no longer returns the original error
3. Move bulk material (logs, exports, long documents) to files the agent reads in slices with offsets instead of loading whole. Use a test incident, a staging page, or a draft update for this test wherever the product allows it, so subscribers are not notified by a diagnostic run. Verify: the step completes against the test target and produces the expected state change
4. Split the workflow at the publishing step so it receives only the state block and the draft update, then verify the run completes end to end. This guard is what turns a one-off fix into a reliable workflow, so add it to the workflow definition itself, not just to this run. Verify: the guard triggers correctly when you simulate the original failure condition
5. Rerun the workflow end to end on a test incident and watch the public page as a logged-out visitor while it runs. Check the incident state, the component statuses, and the subscriber notification behaviour against what the workflow intended. Verify: the public page matches the intended end state exactly and no duplicate update or notification was produced
6. Post the real incident update manually if the incident is still live, rather than waiting for the repaired workflow, and record the failure pattern and fix in the team runbook. Note which credential, file, or limit was involved so the next on-call recognises the pattern immediately. Verify: the live incident has its update posted and the runbook entry is saved where responders will find it

Why it happens

Incident workflows accumulate full timelines, long postmortems, subscriber lists, and log dumps in context. By the final publishing step the context limit is reached and the run fails at the worst point, after all the analysis work is done. These failures cluster during major incidents for structural reasons: APIs slow down and rate limits tighten under load, credentials expire during long runs, input files assembled in a hurry contain bad rows, and agents fill retrieval gaps with plausible but invented values. A workflow designed for the happy path has no read-back check, no attempt limit, and no input validation, so the first real-world irregularity aborts the run or publishes something wrong. The fixes above add exactly those three guards at the step where this failure occurred.

Variants and edge cases

Same failure pattern against a different status or incident API

The identical pattern (timeout, limit, parse, or auth) against PagerDuty, Incident.io, FireHydrant, Better Stack, or Opsgenie instead of Statuspage. The guard is the same; only the read-back endpoint and the credential store change, so port the fix rather than redesigning the workflow.

Failure only during major incidents, never in tests

Load-dependent variants pass every test and fail live. Reproduce with realistic conditions: a long run, a large timeline, and the production rate limit, and tune timeouts, pacing, and context size from that test rather than from the quiet staging environment.

Agent reports success but the page never changed

The most dangerous variant, where no error surfaces at all. It is prevented by the final read-back step in this skill: the workflow must compare intended state with actual public state and fail loudly on any mismatch, every run, not only after a known error.

Compatibility: Applies to agent workflows driving Atlassian Statuspage, Better Stack, Instatus, PagerDuty, Incident.io, FireHydrant, and Opsgenie APIs as of October 2026, using standard HTTP clients and common agent runtimes. Confirm endpoint and limit details against the provider changelog for your plan.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_0PobdiUi5QJNQc670gp2gA

Resolved from the public thread: https://vectle.com/posts/pst_0PobdiUi5QJNQc670gp2gA

Thread query: agent context overflow during post the incident update: context limit error failed the run

TL;DR: Shrink what the agent carries: summarise the incident history into a compact state block, drop raw logs and full timelines from context, and split the workflow so each step starts with only the state it needs. Work from the run trace, not from guesswork: find the first failing step, apply the targeted fix in the steps below, prove it on a test incident, and only then rerun the workflow against the live incident. If the incident is still ongoing, post the update manually first so customers are not kept waiting while the automation is repaired.