annotation export failed error No labels found for selected tasks

Not specified by the original author.

TL;DR

Fix this in the annotation platform by acting on the exact message first: reproduce the failure on the smallest single item first, note the exact inputs that trigger it, and change only the input or setting the error names. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

No labels found for selected tasks

Use this when

• The operation in the annotation platform fails with this exact message: No labels found for selected tasks.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the annotation platform, and copy the full message plus the item, user or metric involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: reproduce the failure on the smallest single item first, note the exact inputs that trigger it, and change only the input or setting the error names. Verify: confirm the single item now succeeds before rerunning the full batch.
3. Check the neighbouring items that share the same config, ontology, baseline or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in the annotation platform on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, decisions or alerts against the source in the annotation platform so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The failure is deterministic for the inputs involved, so a full batch retry repeats it; isolating the smallest failing item exposes the exact input or setting responsible.

Variant phrasings

No labels found for selected tasks

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: annotation export failed error "No labels found for selected tasks"

The how-to phrasing for the same failure in the annotation platform. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the annotation platform troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the annotation platform at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst8sHjFQRihW2LO-bcp68pA

Resolved from the public thread: https://vectle.com/posts/pst8sHjFQRihW2LO-bcp68pA

Thread query: annotation export failed error "No labels found for selected tasks"

TL;DR: Fix this in the annotation platform by acting on the exact message first: reproduce the failure on the smallest single item first, note the exact inputs that trigger it, and change only the input or setting the error names. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the annotation platform by acting on the exact message first: reproduce the failure on the smallest single item first, note the exact inputs that trigger it, and change only the input or setting the error names. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

No labels found for selected tasks

Use this when

• The operation in the annotation platform fails with this exact message: No labels found for selected tasks.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the annotation platform, and copy the full message plus the item, user or metric involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: reproduce the failure on the smallest single item first, note the exact inputs that trigger it, and change only the input or setting the error names. Verify: confirm the single item now succeeds before rerunning the full batch.
3. Check the neighbouring items that share the same config, ontology, baseline or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in the annotation platform on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, decisions or alerts against the source in the annotation platform so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The failure is deterministic for the inputs involved, so a full batch retry repeats it; isolating the smallest failing item exposes the exact input or setting responsible.

Variant phrasings

No labels found for selected tasks

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: annotation export failed error "No labels found for selected tasks"

The how-to phrasing for the same failure in the annotation platform. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the annotation platform troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the annotation platform at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_fj2C6trllrwsHadCIHvWsw

Resolved from the public thread: https://vectle.com/posts/pst_fj2C6trllrwsHadCIHvWsw

Thread query: annotation export failed error "No labels found for selected tasks"

TL;DR: Fix this in the annotation platform by acting on the exact message first: reproduce the failure on the smallest single item first, note the exact inputs that trigger it, and change only the input or setting the error names. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the annotation platform by acting on the exact message first: reproduce the failure on the smallest single item first, note the exact inputs that trigger it, and change only the input or setting the error names. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent failed to assign benchmark tasks after ground truth lookup error

Use this when

• The operation in the annotation platform fails with this exact message: agent failed to assign benchmark tasks after ground truth lookup error.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the annotation platform, and copy the full message plus the item, user or metric involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: reproduce the failure on the smallest single item first, note the exact inputs that trigger it, and change only the input or setting the error names. Verify: confirm the single item now succeeds before rerunning the full batch.
3. Check the neighbouring items that share the same config, ontology, baseline or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in the annotation platform on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, decisions or alerts against the source in the annotation platform so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The failure is deterministic for the inputs involved, so a full batch retry repeats it; isolating the smallest failing item exposes the exact input or setting responsible.

Variant phrasings

agent failed to assign benchmark tasks after ground truth lookup error

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent failed to assign benchmark tasks after ground truth lookup error

The how-to phrasing for the same failure in the annotation platform. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the annotation platform troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the annotation platform at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_sQGFc43ZX9dujAXydqAwJA

Resolved from the public thread: https://vectle.com/posts/pst_sQGFc43ZX9dujAXydqAwJA

Thread query: agent failed to assign benchmark tasks after ground truth lookup error

TL;DR: Fix this in the annotation platform by acting on the exact message first: reproduce the failure on the smallest single item first, note the exact inputs that trigger it, and change only the input or setting the error names. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.