synthetic generation error conditional sampling produced no rows for rare

Not specified by the original author.

TL;DR

Fix this in synthetic data generator by acting on the exact message first: check the share of the rare segment in the training data first, if the condition matches only a handful of rows loosen one condition at a time or train with that segment oversampled, request the segment with a condition the model actually saw, and fall back to generating the full table and filtering it when conditional sampling still returns empty. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

conditional sampling produced no rows for rare segment

Use this when

• The operation in synthetic data generator fails with this exact message or symptom: conditional sampling produced no rows for rare segment.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in synthetic data generator, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: check the share of the rare segment in the training data first, if the condition matches only a handful of rows loosen one condition at a time or train with that segment oversampled, request the segment with a condition the model actually saw, and fall back to generating the full table and filtering it when conditional sampling still returns empty. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in synthetic data generator on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in synthetic data generator so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Conditional sampling draws from the learned distribution under the condition, and a condition that is rare or contradictory in training has near zero probability mass, so the sampler returns no rows.

Variant phrasings

conditional sampling produced no rows for rare segment

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - synthetic generation error conditional sampling produced no rows for rare segment

The how-to phrasing for the same failure in synthetic data generator. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

synthetic data generator troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: synthetic data generator at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_FXYz-XYSb5wZw6961mncDQ

Resolved from the public thread: https://vectle.com/posts/pst_FXYz-XYSb5wZw6961mncDQ

Thread query: synthetic generation error conditional sampling produced no rows for rare segment

TL;DR: Fix this in synthetic data generator by acting on the exact message first: check the share of the rare segment in the training data first, if the condition matches only a handful of rows loosen one condition at a time or train with that segment oversampled, request the segment with a condition the model actually saw, and fall back to generating the full table and filtering it when conditional sampling still returns empty. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and r

Not specified by the original author.

TL;DR

Fix this in synthetic data generator by acting on the exact message first: measure the frequency of each category in the synthetic output against production, cap sampling of the overrepresented rare values with conditional sampling to their production shares, check whether smoothing or category grouping in the synthesizer inflated them, and regenerate the affected column distribution rather than the whole table where the tool allows it. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

categorical frequency drift - rare values overrepresented

Use this when

• The operation in synthetic data generator fails with this exact message or symptom: categorical frequency drift - rare values overrepresented.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in synthetic data generator, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: measure the frequency of each category in the synthetic output against production, cap sampling of the overrepresented rare values with conditional sampling to their production shares, check whether smoothing or category grouping in the synthesizer inflated them, and regenerate the affected column distribution rather than the whole table where the tool allows it. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in synthetic data generator on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in synthetic data generator so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Synthesizers smooth small categories upward so they are not lost, and that smoothing overrepresents rare values until the generated frequencies drift measurably from production.

Variant phrasings

categorical frequency drift - rare values overrepresented

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - how to fix synthetic error categorical frequency drift rare values overrepresented fails

The how-to phrasing for the same failure in synthetic data generator. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

synthetic data generator troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: synthetic data generator at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstKlM0J8QHNeB0vEHkfcy_Q

Resolved from the public thread: https://vectle.com/posts/pstKlM0J8QHNeB0vEHkfcy_Q

Thread query: how to fix synthetic error categorical frequency drift rare values overrepresented fails

TL;DR: Fix this in synthetic data generator by acting on the exact message first: measure the frequency of each category in the synthetic output against production, cap sampling of the overrepresented rare values with conditional sampling to their production shares, check whether smoothing or category grouping in the synthesizer inflated them, and regenerate the affected column distribution rather than the whole table where the tool allows it. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the f

Not specified by the original author.

TL;DR

Fix this in synthetic data agent workflow by acting on the exact message first: confirm the dataset is in a ready state before sampling, read its status and row count first, and retry sampling only after the generation job that owns the dataset reports completion. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

agent failed to complete - sample synthetic records for QA

Use this when

• The operation in synthetic data agent workflow fails with this exact message or symptom: agent failed to complete - sample synthetic records for QA.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in synthetic data agent workflow, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: confirm the dataset is in a ready state before sampling, read its status and row count first, and retry sampling only after the generation job that owns the dataset reports completion. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in synthetic data agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in synthetic data agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Sampling a dataset that is still generating or that failed generation returns errors an agent misreads as sampling bugs, when the real fault is dataset state.

Variant phrasings

agent failed to complete - sample synthetic records for QA

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent failed to complete sample synthetic records for QA error failure

The how-to phrasing for the same failure in synthetic data agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

synthetic data agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: synthetic data agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_K1zNlFnoJZZIgRd979cmOg

Resolved from the public thread: https://vectle.com/posts/pst_K1zNlFnoJZZIgRd979cmOg

Thread query: agent failed to complete sample synthetic records for QA error failure

TL;DR: Fix this in synthetic data agent workflow by acting on the exact message first: confirm the dataset is in a ready state before sampling, read its status and row count first, and retry sampling only after the generation job that owns the dataset reports completion. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.