when agent tried to fetch CVAT annotations it failed with job segment mism

Not specified by the original author.

TL;DR

Fix this in CVAT by acting on the exact message first: fetch the job list for the task first, request annotations per job id rather than by task level frame range, and stitch the per job results together in frame order. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

when agent tried to fetch CVAT annotations it failed with job segment mismatch error

Use this when

• The operation in CVAT fails with this exact message: when agent tried to fetch CVAT annotations it failed with job segment mismatch error.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in CVAT, and copy the full message plus the item, user or metric involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: fetch the job list for the task first, request annotations per job id rather than by task level frame range, and stitch the per job results together in frame order. Verify: annotations return for every job and the stitched set covers the full frame range once.
3. Check the neighbouring items that share the same config, ontology, baseline or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in CVAT on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, decisions or alerts against the source in CVAT so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Task level frame ranges and job segments drift apart when segments are resized; fetching by a range that matches no segment returns a mismatch.

Variant phrasings

when agent tried to fetch CVAT annotations it failed with job segment mismatch error

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: when agent tried to fetch CVAT annotations it failed with job segment mismatch error

The how-to phrasing for the same failure in CVAT. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

CVAT troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: CVAT at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_hc0tJdtEQyNbbHwYrP5JWQ

Resolved from the public thread: https://vectle.com/posts/pst_hc0tJdtEQyNbbHwYrP5JWQ

Thread query: when agent tried to fetch CVAT annotations it failed with job segment mismatch error

TL;DR: Fix this in CVAT by acting on the exact message first: fetch the job list for the task first, request annotations per job id rather than by task level frame range, and stitch the per job results together in frame order. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in CVAT by acting on the exact message first: list the task jobs with their frame ranges, find the pair whose ranges overlap, shrink or delete the stale segment, then assign so each frame range belongs to exactly one job. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

cannot assign job: segment overlaps another job

Use this when

• The operation in CVAT fails with this exact message: cannot assign job: segment overlaps another job.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in CVAT, and copy the full message plus the item, user or metric involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: list the task jobs with their frame ranges, find the pair whose ranges overlap, shrink or delete the stale segment, then assign so each frame range belongs to exactly one job. Verify: the job list shows non overlapping ranges and the assignment saves without the error.
3. Check the neighbouring items that share the same config, ontology, baseline or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in CVAT on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, decisions or alerts against the source in CVAT so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

CVAT partitions a task into disjoint segments; an overlap makes frame ownership ambiguous, so assignment is blocked until the ranges are disjoint.

Variant phrasings

cannot assign job: segment overlaps another job

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: CVAT annotation job failed error "cannot assign job: segment overlaps another job"

The how-to phrasing for the same failure in CVAT. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

CVAT troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: CVAT at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_1YIBJ-XnMLNDfD7klyuqmw

Resolved from the public thread: https://vectle.com/posts/pst_1YIBJ-XnMLNDfD7klyuqmw

Thread query: CVAT annotation job failed error "cannot assign job: segment overlaps another job"

TL;DR: Fix this in CVAT by acting on the exact message first: list the task jobs with their frame ranges, find the pair whose ranges overlap, shrink or delete the stale segment, then assign so each frame range belongs to exactly one job. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in CVAT by acting on the exact message first: export a single job first to isolate the failure, check the server log window for that job, repair or remove the one annotation the exporter stops on (usually a track with a missing keyframe), then export the full dataset. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Annotations export failed with status 500

Use this when

• The operation in CVAT fails with this exact message: Annotations export failed with status 500.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in CVAT, and copy the full message plus the item, user or metric involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: export a single job first to isolate the failure, check the server log window for that job, repair or remove the one annotation the exporter stops on (usually a track with a missing keyframe), then export the full dataset. Verify: one job exports cleanly and the full export then completes with the expected file count.
3. Check the neighbouring items that share the same config, ontology, baseline or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in CVAT on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, decisions or alerts against the source in CVAT so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The exporter serializes every track in order; one corrupt track fails the whole archive on the server side even though the other jobs are fine.

Variant phrasings

Annotations export failed with status 500

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: CVAT export failed error "Annotations export failed with status 500" on dataset download

The how-to phrasing for the same failure in CVAT. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

CVAT troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: CVAT at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstCpvL050R9yff55vcz96_w

Resolved from the public thread: https://vectle.com/posts/pstCpvL050R9yff55vcz96_w

Thread query: CVAT export failed error "Annotations export failed with status 500" on dataset download

TL;DR: Fix this in CVAT by acting on the exact message first: export a single job first to isolate the failure, check the server log window for that job, repair or remove the one annotation the exporter stops on (usually a track with a missing keyframe), then export the full dataset. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.