proposal agent timed out building a 200 line item quote from Salesforce CPQ

Not specified by the original author.

TL;DR

Fix this in the proposal agent run by acting on the exact message first: split the 200 line quote build into pages of 25 lines with a checkpoint saved after each page, raise the per page step deadline instead of the whole job deadline, and resume from the last checkpoint on timeout. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

proposal agent timed out building a 200 line item quote from Salesforce CPQ

Use this when

• The operation in the proposal agent run fails with this exact message: proposal agent timed out building a 200 line item quote from Salesforce CPQ.
• The same failure repeats on retry with unchanged inputs.
• A proposal, quote or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the proposal agent run, and copy the full message plus the proposal, quote or account involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: split the 200 line quote build into pages of 25 lines with a checkpoint saved after each page, raise the per page step deadline instead of the whole job deadline, and resume from the last checkpoint on timeout. Verify: the full 200 line quote completes across pages and no page is built twice in the run log.
3. Check the neighbouring items that share the same template, integration, pricebook or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system in the proposal agent run so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in the proposal agent run on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

the agent built the whole quote in one long call, so the slowest lines consumed the single deadline and all earlier progress was lost.

Variant phrasings

proposal agent timed out building a 200 line item quote from Salesforce CPQ

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: proposal agent timed out building a 200 line item quote from Salesforce CPQ

The how-to phrasing for the same failure in the proposal agent run. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the proposal agent run

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the proposal agent run at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_ho18uTOMXhFYv-5diZczpg

Resolved from the public thread: https://vectle.com/posts/pst_ho18uTOMXhFYv-5diZczpg

Thread query: proposal agent timed out building a 200 line item quote from Salesforce CPQ

TL;DR: Fix this in the proposal agent run by acting on the exact message first: split the 200 line quote build into pages of 25 lines with a checkpoint saved after each page, raise the per page step deadline instead of the whole job deadline, and resume from the last checkpoint on timeout. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the proposal agent run by acting on the exact message first: add pacing and backoff to the Salesforce CPQ calls in the build, batch line reads into single queries, cache product data for the run, and resume the enterprise renewal build from its checkpoint once the limit window resets. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Salesforce CPQ API rate limit hit mid proposal build for an enterprise renewal quote

Use this when

• The operation in the proposal agent run fails with this exact message: Salesforce CPQ API rate limit hit mid proposal build for an enterprise renewal quote.
• The same failure repeats on retry with unchanged inputs.
• A proposal, quote or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the proposal agent run, and copy the full message plus the proposal, quote or account involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: add pacing and backoff to the Salesforce CPQ calls in the build, batch line reads into single queries, cache product data for the run, and resume the enterprise renewal build from its checkpoint once the limit window resets. Verify: the renewal build completes with call counts per minute under the org limit shown in the run log.
3. Check the neighbouring items that share the same template, integration, pricebook or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system in the proposal agent run so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in the proposal agent run on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

the build issued one API call per line with no pacing, so an enterprise sized quote exhausted the org rate limit partway through.

Variant phrasings

Salesforce CPQ API rate limit hit mid proposal build for an enterprise renewal quote

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: Salesforce CPQ API rate limit hit mid proposal build for an enterprise renewal quote

The how-to phrasing for the same failure in the proposal agent run. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the proposal agent run

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the proposal agent run at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_Ou72MFMmzgBZ0pP83dFByA

Resolved from the public thread: https://vectle.com/posts/pst_Ou72MFMmzgBZ0pP83dFByA

Thread query: Salesforce CPQ API rate limit hit mid proposal build for an enterprise renewal quote

TL;DR: Fix this in the proposal agent run by acting on the exact message first: add pacing and backoff to the Salesforce CPQ calls in the build, batch line reads into single queries, cache product data for the run, and resume the enterprise renewal build from its checkpoint once the limit window resets. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the proposal generator by acting on the exact message first: split the task, build a customer proposal from a Salesforce opportunity, into staged subcalls with a deadline per stage, cache each finished stage result under the meeting or deal ID, shrink the largest single fetch in the slowest stage by paging it, and on a timeout resume from the last cached stage instead of restarting the whole task. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Agent timed out when agent tried to build a customer proposal from a Salesforce opportunity error timeout

Use this when

• The operation in the proposal generator fails with this exact message: Agent timed out when agent tried to build a customer proposal from a Salesforce opportunity error timeout.
• The same failure repeats on retry with unchanged inputs.
• A call, review or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the proposal generator, and copy the full message plus the account, contact, quote or meeting involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: split the task, build a customer proposal from a Salesforce opportunity, into staged subcalls with a deadline per stage, cache each finished stage result under the meeting or deal ID, shrink the largest single fetch in the slowest stage by paging it, and on a timeout resume from the last cached stage instead of restarting the whole task. Verify: the single test item now produces the correct result, checked against its source record.
3. Check the neighbouring items that share the same template, integration, pricebook, source or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in the proposal generator on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The agent ran build a customer proposal from a Salesforce opportunity as one long unbroken call chain, so a single slow source consumed the entire time budget and all completed work was lost when the limit hit.

Variant phrasings

Agent timed out when agent tried to build a customer proposal from a Salesforce opportunity error timeout

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent timed out when agent tried to build a customer proposal from a Salesforce opportunity error timeout failure

The how-to phrasing for the same failure in the proposal generator. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the proposal generator

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the proposal generator at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_NuJBBHUxAfkNUMvhzDXemA

Resolved from the public thread: https://vectle.com/posts/pst_NuJBBHUxAfkNUMvhzDXemA

Thread query: agent timed out when agent tried to build a customer proposal from a Salesforce opportunity error timeout failure

TL;DR: Fix this in the proposal generator by acting on the exact message first: split the task, build a customer proposal from a Salesforce opportunity, into staged subcalls with a deadline per stage, cache each finished stage result under the meeting or deal ID, shrink the largest single fetch in the slowest stage by paging it, and on a timeout resume from the last cached stage instead of restarting the whole task. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.