agent failed to complete find stakeholder changes at a strategic account err

Not specified by the original author.

TL;DR

Fix this in the meeting prep briefer by acting on the exact message first: validate every input for the task, find stakeholder changes at a strategic account, before starting, account or opportunity resolved, sources reachable, required fields present, then checkpoint after each stage and retry only the failed stage with its underlying error surfaced in the run log instead of a generic failure. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Agent failed to complete find stakeholder changes at a strategic account error

Use this when

• The operation in the meeting prep briefer fails with this exact message: Agent failed to complete find stakeholder changes at a strategic account error.
• The same failure repeats on retry with unchanged inputs.
• A call, review or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the meeting prep briefer, and copy the full message plus the account, contact, quote or meeting involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: validate every input for the task, find stakeholder changes at a strategic account, before starting, account or opportunity resolved, sources reachable, required fields present, then checkpoint after each stage and retry only the failed stage with its underlying error surfaced in the run log instead of a generic failure. Verify: the single test item now produces the correct result, checked against its source record.
3. Check the neighbouring items that share the same template, integration, pricebook, source or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in the meeting prep briefer on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

One stage inside find stakeholder changes at a strategic account failed partway and the agent had no checkpoints or input validation, so the whole task was reported failed with no way to resume or see which stage broke.

Variant phrasings

Agent failed to complete find stakeholder changes at a strategic account error

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent failed to complete find stakeholder changes at a strategic account error failure

The how-to phrasing for the same failure in the meeting prep briefer. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the meeting prep briefer

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the meeting prep briefer at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_iJAvQf3h3yFgeN57JmcKoA

Resolved from the public thread: https://vectle.com/posts/pst_iJAvQf3h3yFgeN57JmcKoA

Thread query: agent failed to complete find stakeholder changes at a strategic account error failure

TL;DR: Fix this in the meeting prep briefer by acting on the exact message first: validate every input for the task, find stakeholder changes at a strategic account, before starting, account or opportunity resolved, sources reachable, required fields present, then checkpoint after each stage and retry only the failed stage with its underlying error surfaced in the run log instead of a generic failure. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the meeting prep briefer by acting on the exact message first: split the task, find stakeholder changes at a strategic account, into staged subcalls with a deadline per stage, cache each finished stage result under the meeting or deal ID, shrink the largest single fetch in the slowest stage by paging it, and on a timeout resume from the last cached stage instead of restarting the whole task. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Agent timed out when agent tried to find stakeholder changes at a strategic account error timeout

Use this when

• The operation in the meeting prep briefer fails with this exact message: Agent timed out when agent tried to find stakeholder changes at a strategic account error timeout.
• The same failure repeats on retry with unchanged inputs.
• A call, review or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the meeting prep briefer, and copy the full message plus the account, contact, quote or meeting involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: split the task, find stakeholder changes at a strategic account, into staged subcalls with a deadline per stage, cache each finished stage result under the meeting or deal ID, shrink the largest single fetch in the slowest stage by paging it, and on a timeout resume from the last cached stage instead of restarting the whole task. Verify: the single test item now produces the correct result, checked against its source record.
3. Check the neighbouring items that share the same template, integration, pricebook, source or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in the meeting prep briefer on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The agent ran find stakeholder changes at a strategic account as one long unbroken call chain, so a single slow source consumed the entire time budget and all completed work was lost when the limit hit.

Variant phrasings

Agent timed out when agent tried to find stakeholder changes at a strategic account error timeout

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent timed out when agent tried to find stakeholder changes at a strategic account error timeout failure

The how-to phrasing for the same failure in the meeting prep briefer. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the meeting prep briefer

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the meeting prep briefer at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_cxxxC4Mjpg26AUTOEfUS-A

Resolved from the public thread: https://vectle.com/posts/pst_cxxxC4Mjpg26AUTOEfUS-A

Thread query: agent timed out when agent tried to find stakeholder changes at a strategic account error timeout failure

TL;DR: Fix this in the meeting prep briefer by acting on the exact message first: split the task, find stakeholder changes at a strategic account, into staged subcalls with a deadline per stage, cache each finished stage result under the meeting or deal ID, shrink the largest single fetch in the slowest stage by paging it, and on a timeout resume from the last cached stage instead of restarting the whole task. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the meeting prep briefer by acting on the exact message first: fingerprint every attempt at the task, find stakeholder changes at a strategic account, from its inputs plus its last result, stop after two identical fingerprints, and change one thing before retrying, a different source, a narrower query or a human check, recording the repeated action in the run log so the loop is visible. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Agent loop detected: repeating the same meeting prep task to find stakeholder changes at a strategic account error loop

Use this when

• The operation in the meeting prep briefer fails with this exact message: Agent loop detected: repeating the same meeting prep task to find stakeholder changes at a strategic account error loop.
• The same failure repeats on retry with unchanged inputs.
• A call, review or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the meeting prep briefer, and copy the full message plus the account, contact, quote or meeting involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: fingerprint every attempt at the task, find stakeholder changes at a strategic account, from its inputs plus its last result, stop after two identical fingerprints, and change one thing before retrying, a different source, a narrower query or a human check, recording the repeated action in the run log so the loop is visible. Verify: the single test item now produces the correct result, checked against its source record.
3. Check the neighbouring items that share the same template, integration, pricebook, source or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in the meeting prep briefer on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The agent retried find stakeholder changes at a strategic account with unchanged inputs after a result it did not recognise as success, so each attempt reproduced the same state and the loop detector tripped.

Variant phrasings

Agent loop detected: repeating the same meeting prep task to find stakeholder changes at a strategic account error loop

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent loop detected: repeating the same meeting prep task to find stakeholder changes at a strategic account error loop failure

The how-to phrasing for the same failure in the meeting prep briefer. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the meeting prep briefer

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the meeting prep briefer at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_miVPPJKDaqfXa14d3oVCCg

Resolved from the public thread: https://vectle.com/posts/pst_miVPPJKDaqfXa14d3oVCCg

Thread query: agent loop detected: repeating the same meeting prep task to find stakeholder changes at a strategic account error loop failure

TL;DR: Fix this in the meeting prep briefer by acting on the exact message first: fingerprint every attempt at the task, find stakeholder changes at a strategic account, from its inputs plus its last result, stop after two identical fingerprints, and change one thing before retrying, a different source, a narrower query or a human check, recording the repeated action in the run log so the loop is visible. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.