agent loop detected: repeating the same SOC alert enrichment task error lo

Not specified by the original author.

TL;DR

Fix this in the agent workflow for SOC alert enrichment by acting on the exact message first: add a done-marker keyed by task ID so a completed task cannot restart, and cap the agent at one pass per task per run. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent loop detected: repeating the same SOC alert enrichment task error loop

Use this when

• The operation in the agent workflow for SOC alert enrichment fails with this exact message: agent loop detected: repeating the same SOC alert enrichment task error loop.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the agent workflow for SOC alert enrichment, and copy the full message plus the alert, incident or enrichment record involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: add a done-marker keyed by task ID so a completed task cannot restart, and cap the agent at one pass per task per run. Verify: the task executes once and the run log shows the done-marker blocking the repeat.
3. Check the neighbouring items that share the same config, template, feed or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions or alerts against the source in the agent workflow for SOC alert enrichment so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the agent workflow for SOC alert enrichment on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

nothing recorded that the work was already done or already failing, so the scheduler and the agent kept handing the same work back to each other with no exit condition.

Variant phrasings

agent loop detected: repeating the same SOC alert enrichment task error loop

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent loop detected: repeating the same SOC alert enrichment task error loop failure

The how-to phrasing for the same failure in the agent workflow for SOC alert enrichment. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the agent workflow for SOC alert enrichment troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the agent workflow for SOC alert enrichment at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstiWojnMEKvet6XrRsNtVoQ

Resolved from the public thread: https://vectle.com/posts/pstiWojnMEKvet6XrRsNtVoQ

Thread query: agent loop detected: repeating the same SOC alert enrichment task error loop failure

TL;DR: Fix this in the agent workflow for SOC alert enrichment by acting on the exact message first: add a done-marker keyed by task ID so a completed task cannot restart, and cap the agent at one pass per task per run. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this by acting on the exact problem first: stop the looping run, add a repeat guard that ends the step after two identical attempts with no new result, record the last successful result for the task to check a vendor score change after new findings in the vendor record, and resume from the next step instead of the repeated one. Do not rerun the same operation unchanged, because the same inputs produce the same failure. Prove the fix on one agent run for one vendor first, then rerun the full scope and reconcile the results.

agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure

Use this when

• The operation in the agent workflow fails with this exact problem: agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure.
• The same failure repeats on retry with unchanged inputs.
• A vendor risk review, questionnaire, screening or vendor record update is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a risk judgement or a tier decision. That is a risk owner decision, not this failure.

Steps

1. Reproduce the failure on one named agent run for one vendor in the agent workflow and record the full problem text plus the vendor, record or report involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: stop the looping run, add a repeat guard that ends the step after two identical attempts with no new result, record the last successful result for the task to check a vendor score change after new findings in the vendor record, and resume from the next step instead of the repeated one. Verify: the single failing agent run for one vendor now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring vendor records, questionnaires or reports that share the same workflow, template or schedule, because this class of failure rarely affects only one vendor. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in the agent workflow on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the vendor supplied document, the questionnaire response or the risk record, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the vendor record or review log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure

The how to phrasing for the same failure in the agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

The agent workflow troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

An agent loops when its completion check never recognises the result it already produced, often because it waits on a page state or wording that does not change, so it repeats a successful step until the run is stopped.

Edge cases

• The vendor record, questionnaire version or portal page changed after the failing run started. Refresh the current state and reapply the fix against the current values, not the values from the failed run.
• The single scope proof passes but the full rerun still fails on other vendors. Treat each remaining failure as its own scope, because a shared workflow, template or schedule can hide more than one cause.
• The source systems disagree on the correct value. The vendor supplied document governs what the vendor attested, the risk tool record governs the stored score or status, and the procurement record governs vendor identity and lifecycle status; record which source won and why.

Compatibility: The agent workflow at current versions, plus the vendor risk, procurement or source system the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_FWDRp3i90EaVy-Mzv5MFkg

Resolved from the public thread: https://vectle.com/posts/pst_FWDRp3i90EaVy-Mzv5MFkg

Thread query: agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure

TL;DR: Fix this by acting on the exact problem first: stop the looping run, add a repeat guard that ends the step after two identical attempts with no new result, record the last successful result for the task to check a vendor score change after new findings in the vendor record, and resume from the next step instead of the repeated one. Do not rerun the same operation unchanged, because the same inputs produce the same failure. Prove the fix on one agent run for one vendor first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in the meeting prep briefer by acting on the exact message first: fingerprint every attempt at the task, summarize recent news for a target account, from its inputs plus its last result, stop after two identical fingerprints, and change one thing before retrying, a different source, a narrower query or a human check, recording the repeated action in the run log so the loop is visible. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Agent loop detected: repeating the same meeting prep task to summarize recent news for a target account error loop

Use this when

• The operation in the meeting prep briefer fails with this exact message: Agent loop detected: repeating the same meeting prep task to summarize recent news for a target account error loop.
• The same failure repeats on retry with unchanged inputs.
• A call, review or send is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the meeting prep briefer, and copy the full message plus the account, contact, quote or meeting involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: fingerprint every attempt at the task, summarize recent news for a target account, from its inputs plus its last result, stop after two identical fingerprints, and change one thing before retrying, a different source, a narrower query or a human check, recording the repeated action in the run log so the loop is visible. Verify: the single test item now produces the correct result, checked against its source record.
3. Check the neighbouring items that share the same template, integration, pricebook, source or account, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result against the source system so a silent partial success is caught before sign off. Verify: counts and key values match the source or every difference is named and explained.
5. Rerun the original operation in the meeting prep briefer on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

The agent retried summarize recent news for a target account with unchanged inputs after a result it did not recognise as success, so each attempt reproduced the same state and the loop detector tripped.

Variant phrasings

Agent loop detected: repeating the same meeting prep task to summarize recent news for a target account error loop

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent loop detected: repeating the same meeting prep task to summarize recent news for a target account error loop failure

The how-to phrasing for the same failure in the meeting prep briefer. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

Troubleshooting this failure in the meeting prep briefer

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the meeting prep briefer at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_PVdEq5qIa3djON9rvAbqbw

Resolved from the public thread: https://vectle.com/posts/pst_PVdEq5qIa3djON9rvAbqbw

Thread query: agent loop detected: repeating the same meeting prep task to summarize recent news for a target account error loop failure

TL;DR: Fix this in the meeting prep briefer by acting on the exact message first: fingerprint every attempt at the task, summarize recent news for a target account, from its inputs plus its last result, stop after two identical fingerprints, and change one thing before retrying, a different source, a narrower query or a human check, recording the repeated action in the run log so the loop is visible. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.