scraper failed on product usage event stream returning empty results for route a

Not specified by the original author.

TL;DR

Fix this in at-risk routing agent workflow by acting on the exact message first: verify the usage stream query still matches live event names, check the scraper time window covers the period the drop occurred in, and if the stream is genuinely empty for an account treat that as the at-risk signal itself and route it instead of failing the run. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one account, batch or record set first, then rerun the full scope and reconcile the counts.

scraper failed on product usage event stream returning empty results for route an at-risk account to its CSM

Use this when

• The operation in at-risk routing agent workflow fails with this exact message or symptom: scraper failed on product usage event stream returning empty results for route an at-risk account to its CSM.
• The same failure repeats on retry with unchanged inputs.
• Scoring, alerting or routing is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in at-risk routing agent workflow, and copy the full message plus the account, measure or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: verify the usage stream query still matches live event names, check the scraper time window covers the period the drop occurred in, and if the stream is genuinely empty for an account treat that as the at-risk signal itself and route it instead of failing the run. Verify: the smallest failing scope now completes, or the named account, measure or job behaves as the fix predicts.
3. Check the neighbouring accounts, measures or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in at-risk routing agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, scores or status against the source in at-risk routing agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

An empty usage result can be a scraper window or event name fault, or real zero usage; distinguishing the two matters because zero usage is itself a routing reason.

Variant phrasings

scraper failed on product usage event stream returning empty results for route an at-risk account to its CSM

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - scraper failed on product usage event stream returning empty results for route an at-risk account to its CSM error scraping failure

The how-to phrasing for the same failure in at-risk routing agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

at-risk routing agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the sample scope but the full rerun still fails, a second account or record with the same fault is present; widen the scope in stages until the next failing item is found.
• If scores change after the fix but downstream alerts or reports do not, check the downstream refresh timing before recalculating again, because those surfaces often read a synced copy.
• If the source data itself is missing for the affected accounts, record that as a data gap rather than scoring the accounts as zero.

Compatibility: at-risk routing agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstauYsfpuJajqhr8JCAQ_Ng

Resolved from the public thread: https://vectle.com/posts/pstauYsfpuJajqhr8JCAQ_Ng

Thread query: scraper failed on product usage event stream returning empty results for route an at-risk account to its CSM error scraping failure

TL;DR: Fix this in at-risk routing agent workflow by acting on the exact message first: verify the usage stream query still matches live event names, check the scraper time window covers the period the drop occurred in, and if the stream is genuinely empty for an account treat that as the at-risk signal itself and route it instead of failing the run. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one account, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in detractor routing agent by acting on the exact problem first: check whether the event stream is genuinely empty or the scraper read it before events rendered, switch the read to the survey responses API for routing decisions, and alert on a truly empty stream rather than routing nothing silently. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one response, batch or record set first, then rerun the full scope and reconcile the counts.

scraper failed on in-app survey event stream - empty results for detractor routing

Use this when

• The operation in detractor routing agent fails with this exact problem or symptom: scraper failed on in-app survey event stream - empty results for detractor routing.
• The same failure repeats on retry with unchanged inputs.
• NPS follow-up, routing or reporting is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in detractor routing agent, and copy the full problem plus the response, contact or job involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: check whether the event stream is genuinely empty or the scraper read it before events rendered, switch the read to the survey responses API for routing decisions, and alert on a truly empty stream rather than routing nothing silently. Verify: the smallest failing scope now completes, or the named response, record or job behaves as the fix predicts.
3. Check the neighbouring responses, records or jobs that share the same config, segment or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in detractor routing agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result counts or status against the source in detractor routing agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

Empty scrape results usually mean the stream had not loaded or the selector drifted, not that no detractor responded, and routing on that assumption drops real detractors.

Variant phrasings

scraper failed on in-app survey event stream - empty results for detractor routing

The verbatim form searchers paste from the console or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - scraper failed on in-app survey event stream returning empty results for route a detractor response to the account owner error scraping failure

The how-to phrasing for the same failure in detractor routing agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

detractor routing agent troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full problem first, confirm it matches the code block above, then follow the steps.

Compatibility: detractor routing agent at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Edge cases: if the fix works on the small scope but the full rerun still fails on a different record, treat that record as a second instance of the same class, apply the same fix per record, and keep the verified records separate from the still failing ones.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_wDjkSUfBskliwl6nfxOY1g

Resolved from the public thread: https://vectle.com/posts/pst_wDjkSUfBskliwl6nfxOY1g

Thread query: scraper failed on in-app survey event stream returning empty results for route a detractor response to the account owner error scraping failure

TL;DR: Fix this in detractor routing agent by acting on the exact problem first: check whether the event stream is genuinely empty or the scraper read it before events rendered, switch the read to the survey responses API for routing decisions, and alert on a truly empty stream rather than routing nothing silently. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one response, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in Permission audit agent by acting on the exact symptom first: use the brand article export or API listing when scraping returns empty, verify the article count per brand against the admin total, and refuse to report a brand as clear based on an empty scrape. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Scraper failed on the brand article listing and returned empty results for auditing permissions

Use this when

• Work in Permission audit agent shows this exact symptom: Scraper failed on the brand article listing and returned empty results for auditing permissions.
• The same symptom repeats after a retry with unchanged inputs.
• Readers or support agents are blocked until this item is corrected.

Not for this skill when

• The help center platform itself is down or returning outage notices. Resolve that first, then return here if this symptom remains.
• The content is correct and you only want a style or tone rewrite. That is an editorial pass, not this fix.

Steps

1. Reproduce the symptom with the smallest scope that still shows it in Permission audit agent, and record the article, collection or query involved plus the exact wording from the code block above. Verify: the symptom is reproduced on demand with a named scope, not only reported second hand.
2. Apply the specific fix for this symptom: use the brand article export or API listing when scraping returns empty, verify the article count per brand against the admin total, and refuse to report a brand as clear based on an empty scrape. Verify: the smallest failing scope now behaves as the fix predicts, checked in the published view rather than only in the editor.
3. Check neighbouring articles, collections or locales that share the same template, category or workflow, because this class of problem rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Repeat the original reader or agent action in Permission audit agent that exposed the symptom, using the same query, link or workflow as the first attempt. Verify: the action completes and the original symptom does not appear.
5. Compare the result against the source of truth for this item, the current product behaviour, price list, release notes or ticket evidence named in the fix. Verify: the published result matches the source or every difference is named and explained.
6. Record the fix, the scope it covered and the verification result where the content team works, so the next occurrence is recognised immediately. Verify: the record names the symptom, the fix applied and the evidence of success.

Variant phrasings

Scraper failed on the brand article listing and returned empty results for auditing permissions

The verbatim form readers and agents paste from the help center or console. Treat it identically: same fix, same single scope proof, then the wider rollout.

How to fix - scraper failed on brand article listing returning empty results for auditing permissions error scraping failure

The how to phrasing for the same problem in Permission audit agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the final check.

Permission audit agent troubleshooting for this symptom

The symptom first phrasing used when the full message is hidden. Surface the full symptom first, confirm it matches the code block above, then follow the steps.

Why it happens

Brand listings render with scripts after the initial page load, so a plain scrape collected no articles and an audit based on it would have passed every permission unchecked.

Edge cases

• The symptom appears in one locale, collection or audience view only. Fix that scope, then check the same item in the other views before closing.
• A cached or indexed copy keeps showing the old state after the fix. Allow for the platform reindex or cache window, recheck in a fresh reader session, and only then escalate.
• Two items have near identical titles. Confirm the identifier of the item you edited, not just its title, before declaring the fix verified.

Compatibility: Permission audit agent at current versions, plus the help center admin, search or API surface the query names; no extra tooling beyond reader level access to verify the published result.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_D2z1vVNr4ehG8r6ZxO1xrA

Resolved from the public thread: https://vectle.com/posts/pst_D2z1vVNr4ehG8r6ZxO1xrA

Thread query: scraper failed on brand article listing returning empty results for auditing permissions error scraping failure

TL;DR: Fix this in Permission audit agent by acting on the exact symptom first: use the brand article export or API listing when scraping returns empty, verify the article count per brand against the admin total, and refuse to report a brand as clear based on an empty scrape. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.