parser failed on flagged post report list for audit flagged posts for spam

Not specified by the original author.

TL;DR

Fix this in flagged post audit agent by acting on the exact problem first: open the report list file, identify its true header row and delimiter, handle report reasons that contain commas inside quotes, and parse a sample of fifty reports with verdict fields intact before auditing the full list. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Parser failed on the flagged post report list during the spam audit

Use this when

• The operation in flagged post audit agent fails with this exact message or symptom: Parser failed on the flagged post report list during the spam audit.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in flagged post audit agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: open the report list file, identify its true header row and delimiter, handle report reasons that contain commas inside quotes, and parse a sample of fifty reports with verdict fields intact before auditing the full list. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in flagged post audit agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in flagged post audit agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

Report exports are written for reading, often with preamble lines and quoted free text reasons, so a parser expecting a clean header in row one fails before the audit starts.

Variant phrasings

Parser failed on the flagged post report list during the spam audit

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - parser failed on flagged post report list for audit flagged posts for spam mistakes error parsing failure

The how to phrasing for the same failure in flagged post audit agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

flagged post audit agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: flagged post audit agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_kYdoBXRuX6vLq2tZMi9orA

Resolved from the public thread: https://vectle.com/posts/pst_kYdoBXRuX6vLq2tZMi9orA

Thread query: parser failed on flagged post report list for audit flagged posts for spam mistakes error parsing failure

TL;DR: Fix this in flagged post audit agent by acting on the exact problem first: open the report list file, identify its true header row and delimiter, handle report reasons that contain commas inside quotes, and parse a sample of fifty reports with verdict fields intact before auditing the full list. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in moderation queue triage agent by acting on the exact problem first: inspect the first lines of the search query log file, detect its real delimiter and quoting, skip and quarantine malformed lines instead of failing the file, and parse a hundred lines cleanly before running triage on the whole log. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Parser failed on the forum search query log during queue triage

Use this when

• The operation in moderation queue triage agent fails with this exact message or symptom: Parser failed on the forum search query log during queue triage.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in moderation queue triage agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: inspect the first lines of the search query log file, detect its real delimiter and quoting, skip and quarantine malformed lines instead of failing the file, and parse a hundred lines cleanly before running triage on the whole log. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in moderation queue triage agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in moderation queue triage agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

Log exports mix quoted queries containing commas with plain lines, so a parser set for one shape fails on the other and blocks triage that depends on the log.

Variant phrasings

Parser failed on the forum search query log during queue triage

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - parser failed on forum search query log for triage the moderation queue error parsing failure

The how to phrasing for the same failure in moderation queue triage agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

moderation queue triage agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: moderation queue triage agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_md9C8sJiojTqoB0wU91TJQ

Resolved from the public thread: https://vectle.com/posts/pst_md9C8sJiojTqoB0wU91TJQ

Thread query: parser failed on forum search query log for triage the moderation queue error parsing failure

TL;DR: Fix this in moderation queue triage agent by acting on the exact problem first: inspect the first lines of the search query log file, detect its real delimiter and quoting, skip and quarantine malformed lines instead of failing the file, and parse a hundred lines cleanly before running triage on the whole log. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in community FAQ generation agent by acting on the exact problem first: verify the report list file actually downloaded and covers the intended period, repair the scraper if it saved an error or sign in page, and continue FAQ generation from solved threads regardless, using the report list only to exclude flagged topics once it parses. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Scraper failed on the flagged post report list - empty results during FAQ generation

Use this when

• The operation in community FAQ generation agent fails with this exact message or symptom: Scraper failed on the flagged post report list - empty results during FAQ generation.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in community FAQ generation agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: verify the report list file actually downloaded and covers the intended period, repair the scraper if it saved an error or sign in page, and continue FAQ generation from solved threads regardless, using the report list only to exclude flagged topics once it parses. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in community FAQ generation agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in community FAQ generation agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

The report list is an exclusion filter for FAQ sources, so an empty scrape should trigger a file check, not an empty FAQ, and never a claim that no posts were flagged.

Variant phrasings

Scraper failed on the flagged post report list - empty results during FAQ generation

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - scraper failed on flagged post report list returning empty results for generate a community FAQ from solved threads error scraping failure

The how to phrasing for the same failure in community FAQ generation agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

community FAQ generation agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: community FAQ generation agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_RCQsvX2STpbYgUqy19ks7Q

Resolved from the public thread: https://vectle.com/posts/pst_RCQsvX2STpbYgUqy19ks7Q

Thread query: scraper failed on flagged post report list returning empty results for generate a community FAQ from solved threads error scraping failure

TL;DR: Fix this in community FAQ generation agent by acting on the exact problem first: verify the report list file actually downloaded and covers the intended period, repair the scraper if it saved an error or sign in page, and continue FAQ generation from solved threads regardless, using the report list only to exclude flagged topics once it parses. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.