agent loop detected: repeatedly retrying schedule the final payroll run for

Not specified by the original author.

TL;DR

Fix this in final payroll scheduling agent by acting on the exact problem first: store the scheduling result returned for each pay group, check for an existing result for that group before retrying, treat a group with a stored result as scheduled, and move to the next unscheduled group because duplicate scheduling can create duplicate payroll runs. Do not rerun the whole offboarding workflow unchanged, because the same inputs produce the same failure. Prove the fix on one departing employee first, then rerun the full scope and verify access, assets and records.

agent loop detected: repeatedly retrying schedule the final payroll run for a departing employee error failure loop

Use this when

• The operation in final payroll scheduling agent fails with this exact problem: agent loop detected: repeatedly retrying schedule the final payroll run for a departing employee error failure loop.
• The same failure repeats on retry with unchanged inputs.
• An exit checklist, access revocation, handover or equipment return is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with an employment decision such as the termination date set by HR or the severance terms. That is an HR and legal decision, not this failure.

Steps

1. Reproduce the failure on one named departing employee in final payroll scheduling agent and record the full problem text plus the employee, last day or checklist involved. Verify: the failure is reproduced on demand on a named employee, not only seen in a log.
2. Apply the specific fix for this problem: store the scheduling result returned for each pay group, check for an existing result for that group before retrying, treat a group with a stored result as scheduled, and move to the next unscheduled group because duplicate scheduling can create duplicate payroll runs. Verify: the single failing employee or checklist now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring employees, applications or checklist steps that share the same termination workflow, template or sync, because this class of failure rarely affects only one leaver. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in final payroll scheduling agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the HR record for last day and status, the identity provider for account access, the payroll record for final pay or the asset inventory for equipment. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the offboarding checklist audit log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent loop detected: repeatedly retrying schedule the final payroll run for a departing employee error failure loop

The verbatim form searchers paste from the console, checklist or run log. Treat it identically: same fix, same single employee proof, then the full rerun.

How to fix - agent loop detected: repeatedly retrying schedule the final payroll run for a departing employee error failure loop

The how to phrasing for the same failure in final payroll scheduling agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

final payroll scheduling agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

The agent retries because it looks for confirmation in a run list the payroll system updates later, so it repeats finished groups while other groups stay unscheduled and the exit ages.

Edge cases

• The employee record was corrected, the last day moved or the exit was cancelled after the failing run started. Refresh the record state and reapply the fix against the current values, not the values from the failed run.
• The single employee proof passes but the full rerun still fails on other employees. Treat each remaining failure as its own scope, because a shared template or sync can hide more than one cause.
• The source systems disagree on the correct state. The HR record governs last day and employment status, the identity provider governs account access, and the asset system governs equipment; record which source won and why.

Compatibility: final payroll scheduling agent at current versions, plus the HR, identity, payroll or asset system the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_oDaICwdZdf8E3EXbXMx3xQ

Resolved from the public thread: https://vectle.com/posts/pst_oDaICwdZdf8E3EXbXMx3xQ

Thread query: agent loop detected: repeatedly retrying schedule the final payroll run for a departing employee error failure loop

TL;DR: Fix this in final payroll scheduling agent by acting on the exact problem first: store the scheduling result returned for each pay group, check for an existing result for that group before retrying, treat a group with a stored result as scheduled, and move to the next unscheduled group because duplicate scheduling can create duplicate payroll runs. Do not rerun the whole offboarding workflow unchanged, because the same inputs produce the same failure. Prove the fix on one departing employee first, then rerun the full scope and verify access, assets and records.

Not specified by the original author.

TL;DR

Fix this in final payroll scheduling agent by acting on the exact problem first: record each scheduling step already attempted in a run file keyed by step and pay group, check that file before scheduling again, stop after the same step appears twice, and report steps still open instead of retrying completed ones in a loop. Do not rerun the whole offboarding workflow unchanged, because the same inputs produce the same failure. Prove the fix on one departing employee first, then rerun the full scope and verify access, assets and records.

agent stuck loop detected repeating the same step while trying to schedule the final payroll run for a departing employee error failure

Use this when

• The operation in final payroll scheduling agent fails with this exact problem: agent stuck loop detected repeating the same step while trying to schedule the final payroll run for a departing employee error failure.
• The same failure repeats on retry with unchanged inputs.
• An exit checklist, access revocation, handover or equipment return is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with an employment decision such as the termination date set by HR or the severance terms. That is an HR and legal decision, not this failure.

Steps

1. Reproduce the failure on one named departing employee in final payroll scheduling agent and record the full problem text plus the employee, last day or checklist involved. Verify: the failure is reproduced on demand on a named employee, not only seen in a log.
2. Apply the specific fix for this problem: record each scheduling step already attempted in a run file keyed by step and pay group, check that file before scheduling again, stop after the same step appears twice, and report steps still open instead of retrying completed ones in a loop. Verify: the single failing employee or checklist now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring employees, applications or checklist steps that share the same termination workflow, template or sync, because this class of failure rarely affects only one leaver. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in final payroll scheduling agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the HR record for last day and status, the identity provider for account access, the payroll record for final pay or the asset inventory for equipment. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the offboarding checklist audit log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent stuck loop detected repeating the same step while trying to schedule the final payroll run for a departing employee error failure

The verbatim form searchers paste from the console, checklist or run log. Treat it identically: same fix, same single employee proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same step while trying to schedule the final payroll run for a departing employee error failure

The how to phrasing for the same failure in final payroll scheduling agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

final payroll scheduling agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

The agent loops because it reads the run status from a payroll queue view that updates after its check, so a scheduled run looks unscheduled forever until the attempt is recorded where its own check looks.

Edge cases

• The employee record was corrected, the last day moved or the exit was cancelled after the failing run started. Refresh the record state and reapply the fix against the current values, not the values from the failed run.
• The single employee proof passes but the full rerun still fails on other employees. Treat each remaining failure as its own scope, because a shared template or sync can hide more than one cause.
• The source systems disagree on the correct state. The HR record governs last day and employment status, the identity provider governs account access, and the asset system governs equipment; record which source won and why.

Compatibility: final payroll scheduling agent at current versions, plus the HR, identity, payroll or asset system the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_b6pQ4OqrNNH8d2YUg7PwnA

Resolved from the public thread: https://vectle.com/posts/pst_b6pQ4OqrNNH8d2YUg7PwnA

Thread query: agent stuck loop detected repeating the same step while trying to schedule the final payroll run for a departing employee error failure

TL;DR: Fix this in final payroll scheduling agent by acting on the exact problem first: record each scheduling step already attempted in a run file keyed by step and pay group, check that file before scheduling again, stop after the same step appears twice, and report steps still open instead of retrying completed ones in a loop. Do not rerun the whole offboarding workflow unchanged, because the same inputs produce the same failure. Prove the fix on one departing employee first, then rerun the full scope and verify access, assets and records.

Not specified by the original author.

TL;DR

Fix this in payroll preview agent by acting on the exact problem first: add a retry counter with a hard stop after two failed preview attempts, capture the failure reason from the payroll system on each attempt, and change something named by that reason, a filter, a period or a record, before any further retry. Do not rerun the whole payroll workflow unchanged, because the same inputs produce the same failure. Prove the fix on one employee first, then rerun the full scope and reconcile the results against the payroll register.

agent loop detected repeatedly retrying run the payroll preview and check anomalies

Use this when

• The operation in payroll preview agent fails with this exact problem: agent loop detected repeatedly retrying run the payroll preview and check anomalies.
• The same failure repeats on retry with unchanged inputs.
• A payroll run, tax filing, garnishment check or pay close is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The payroll completes and you only disagree with a pay policy decision such as a rate or a benefit rule. That is a policy change, not this failure.

Steps

1. Reproduce the failure on one named employee in payroll preview agent and record the full problem text plus the employee, pay period or filing involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: add a retry counter with a hard stop after two failed preview attempts, capture the failure reason from the payroll system on each attempt, and change something named by that reason, a filter, a period or a record, before any further retry. Verify: the single failing employee now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring employees, pay groups or filings that share the same pay code, deduction setup or import, because this class of failure rarely affects only one employee. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in payroll preview agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the payroll register, the tax filings or the employee records, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the employee or run record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent loop detected repeatedly retrying run the payroll preview and check anomalies

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single employee proof, then the full rerun.

How to fix - agent loop detected: repeatedly retrying run the payroll preview and check anomalies error failure loop

The how to phrasing for the same failure in payroll preview agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

payroll preview agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Retrying an unchanged preview reproduces the same failure indefinitely, and a counter plus a named reason force the agent to fix an input instead of repeating the call.

Edge cases

• The employee was terminated, transferred or given a rate change after the failing run started. Refresh the employee state and reapply the fix against the current values, not the values from the failed run.
• The single employee proof passes but the full rerun still fails on other employees. Treat each remaining failure as its own scope, because a shared pay code or import can hide more than one cause.
• The source systems disagree on the correct value. The payroll register governs amounts paid, the tax filings govern amounts reported, and the employee record governs setup; record which source won and why.

Compatibility: payroll preview agent at current versions, plus the payroll system, time system or general ledger the query names; no extra tooling beyond access to the payroll register, tax filings and employee records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_dggB6V78CE3HGfu3LKoSRg

Resolved from the public thread: https://vectle.com/posts/pst_dggB6V78CE3HGfu3LKoSRg

Thread query: agent loop detected: repeatedly retrying run the payroll preview and check anomalies error failure loop

TL;DR: Fix this in payroll preview agent by acting on the exact problem first: add a retry counter with a hard stop after two failed preview attempts, capture the failure reason from the payroll system on each attempt, and change something named by that reason, a filter, a period or a record, before any further retry. Do not rerun the whole payroll workflow unchanged, because the same inputs produce the same failure. Prove the fix on one employee first, then rerun the full scope and reconcile the results against the payroll register.