agent timed out when agent tried to audit flagged posts for spam mist

Not specified by the original author.

TL;DR

Fix this in flagged post audit agent by acting on the exact problem first: run a fast first pass over all flagged posts using post text and flag outcome only, then spend the remaining budget on a deep pass over the uncertain minority, saving both pass results separately so the timeout never erases the fast verdicts. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Agent timed out auditing flagged posts for spam mistakes - slow run

Use this when

• The operation in flagged post audit agent fails with this exact message or symptom: Agent timed out auditing flagged posts for spam mistakes - slow run.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in flagged post audit agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: run a fast first pass over all flagged posts using post text and flag outcome only, then spend the remaining budget on a deep pass over the uncertain minority, saving both pass results separately so the timeout never erases the fast verdicts. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in flagged post audit agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in flagged post audit agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

A single deep pass over every post is slower than the audit window allows, and layering the passes guarantees complete coverage with depth where it matters.

Variant phrasings

Agent timed out auditing flagged posts for spam mistakes - slow run

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent timed out when agent tried to audit flagged posts for spam mistakes error timeout failure slow

The how to phrasing for the same failure in flagged post audit agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

flagged post audit agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: flagged post audit agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_q79VgYajeQhqdvq-pREUuw

Resolved from the public thread: https://vectle.com/posts/pst_q79VgYajeQhqdvq-pREUuw

Thread query: agent timed out when agent tried to audit flagged posts for spam mistakes error timeout failure slow

TL;DR: Fix this in flagged post audit agent by acting on the exact problem first: run a fast first pass over all flagged posts using post text and flag outcome only, then spend the remaining budget on a deep pass over the uncertain minority, saving both pass results separately so the timeout never erases the fast verdicts. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in flagged post audit agent by acting on the exact problem first: audit flagged posts in dated batches, saving the verdict per post as it is decided, starting with posts where members appealed, and resume from the first unaudited post after any timeout so the audit always makes durable progress. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Agent failed to audit flagged posts for spam mistakes - timeout

Use this when

• The operation in flagged post audit agent fails with this exact message or symptom: Agent failed to audit flagged posts for spam mistakes - timeout.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in flagged post audit agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: audit flagged posts in dated batches, saving the verdict per post as it is decided, starting with posts where members appealed, and resume from the first unaudited post after any timeout so the audit always makes durable progress. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in flagged post audit agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in flagged post audit agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

Auditing a whole flag history in one run loses every verdict on timeout, while per post saved verdicts turn the audit into steady progress even across failures.

Variant phrasings

Agent failed to audit flagged posts for spam mistakes - timeout

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent failed to audit flagged posts for spam mistakes error failure timeout

The how to phrasing for the same failure in flagged post audit agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

flagged post audit agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: flagged post audit agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_EBghW3XzCqcRsTBkpWDaRA

Resolved from the public thread: https://vectle.com/posts/pst_EBghW3XzCqcRsTBkpWDaRA

Thread query: agent failed to audit flagged posts for spam mistakes error failure timeout

TL;DR: Fix this in flagged post audit agent by acting on the exact problem first: audit flagged posts in dated batches, saving the verdict per post as it is decided, starting with posts where members appealed, and resume from the first unaudited post after any timeout so the audit always makes durable progress. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in flagged post audit agent by acting on the exact problem first: audit from the flagged post export or API instead of paging the dashboard, and if a dashboard check is needed for one post, open that post directly by its url and wait on the post element, recording the post id before and after the check. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Browser automation failed on the dashboard page during the flagged post audit - timeout

Use this when

• The operation in flagged post audit agent fails with this exact message or symptom: Browser automation failed on the dashboard page during the flagged post audit - timeout.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in flagged post audit agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: audit from the flagged post export or API instead of paging the dashboard, and if a dashboard check is needed for one post, open that post directly by its url and wait on the post element, recording the post id before and after the check. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in flagged post audit agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in flagged post audit agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

Paging a slow dashboard for hundreds of audit items guarantees timeouts, while the export gives the same fields in one file the audit can work through reliably.

Variant phrasings

Browser automation failed on the dashboard page during the flagged post audit - timeout

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - browser automation failed on dashboard page when agent tried to audit flagged posts for spam mistakes error timeout failure

The how to phrasing for the same failure in flagged post audit agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

flagged post audit agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: flagged post audit agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstHC0HBqhDeNeYy_95Befhw

Resolved from the public thread: https://vectle.com/posts/pstHC0HBqhDeNeYy_95Befhw

Thread query: browser automation failed on dashboard page when agent tried to audit flagged posts for spam mistakes error timeout failure

TL;DR: Fix this in flagged post audit agent by acting on the exact problem first: audit from the flagged post export or API instead of paging the dashboard, and if a dashboard check is needed for one post, open that post directly by its url and wait on the post element, recording the post id before and after the check. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.