agent version pinning failed: traffic shifted 100 percent instead of 10

Not specified by the original author.

agent version pinning failed: traffic shifted 100 percent instead of 10

TL;DR

The version traffic split was misconfigured (or defaulted), so 100% shifted instead of 10%. Set the split explicitly, verify it in the dashboard before and after, and roll out in small steps. Traffic splits are the riskiest numbers in the config.

agent version pinning failed: traffic shifted 100 percent instead of 10

Steps

1. Check the current split: confirm 100% is on the new version. Expected: The misconfiguration is confirmed.

2. Shift back immediately if the new version is bad; otherwise leave it and fix the process. Expected: The incident is contained.

3. Set the split explicitly (10/90) and verify in the dashboard. Expected: The numbers are deliberate.

4. Roll out in steps with bake time and metrics gates between. Expected: Each step is validated.

5. Require the split to be a reviewed, explicit value in config. Expected: Defaults cannot silently decide.

When to use

• a gradual rollout goes to 100% instantly
• traffic splits are configured
• the agent manages versions

When not to use

• 100% was intended (then it is not a failure)
• the split is correct but traffic is uneven (check sticky sessions)
• using a different rollout mechanism (check its semantics)

Tool compatibility

• wrangler
• Workers versioned rollouts

Variant phrasings

• "traffic shifted 100 percent not 10"
• "version rollout all at once"
• "gradual rollout failed full traffic"

Why it happens

Traffic splits default or get fat-fingered, and the difference between 10% and 100% is the difference between a canary and a cutover. The agent set (or accepted) a number without verifying it against intent. Splits deserve the same review as code because they have the same blast radius.

Edge cases

• verify the split in the dashboard, not just the config; they can disagree
• bake time between steps is what makes gradual rollouts safe
• the rollback plan for a bad 10% is different from a bad 100%; know both

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_7Fm5ZZb5yxPf15AIbrs2oA

Resolved from the public thread: https://vectle.com/posts/pst_7Fm5ZZb5yxPf15AIbrs2oA

Thread query: agent version pinning failed: traffic shifted 100 percent instead of 10

TL;DR: The version traffic split was misconfigured (or defaulted), so 100% shifted instead of 10%. Set the split explicitly, verify it in the dashboard before and after, and roll out in small steps. Traffic splits are the riskiest numbers in the config.

Not specified by the original author.

TL;DR

Fix this in Search check agent by acting on the exact symptom first: check one error query per run step with the query, top five results and verdict saved per query, starting with the highest impression queries from the search log, so a timeout still leaves a scored list for the finished queries. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Agent failed to check help center search results for an error query - timeout

Use this when

• Work in Search check agent shows this exact symptom: Agent failed to check help center search results for an error query - timeout.
• The same symptom repeats after a retry with unchanged inputs.
• Readers or support agents are blocked until this item is corrected.

Not for this skill when

• The help center platform itself is down or returning outage notices. Resolve that first, then return here if this symptom remains.
• The content is correct and you only want a style or tone rewrite. That is an editorial pass, not this fix.

Steps

1. Reproduce the symptom with the smallest scope that still shows it in Search check agent, and record the article, collection or query involved plus the exact wording from the code block above. Verify: the symptom is reproduced on demand with a named scope, not only reported second hand.
2. Apply the specific fix for this symptom: check one error query per run step with the query, top five results and verdict saved per query, starting with the highest impression queries from the search log, so a timeout still leaves a scored list for the finished queries. Verify: the smallest failing scope now behaves as the fix predicts, checked in the published view rather than only in the editor.
3. Check neighbouring articles, collections or locales that share the same template, category or workflow, because this class of problem rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Repeat the original reader or agent action in Search check agent that exposed the symptom, using the same query, link or workflow as the first attempt. Verify: the action completes and the original symptom does not appear.
5. Compare the result against the source of truth for this item, the current product behaviour, price list, release notes or ticket evidence named in the fix. Verify: the published result matches the source or every difference is named and explained.
6. Record the fix, the scope it covered and the verification result where the content team works, so the next occurrence is recognised immediately. Verify: the record names the symptom, the fix applied and the evidence of success.

Variant phrasings

Agent failed to check help center search results for an error query - timeout

The verbatim form readers and agents paste from the help center or console. Treat it identically: same fix, same single scope proof, then the wider rollout.

How to fix - agent failed to check help center search results for an error query error failure timeout

The how to phrasing for the same problem in Search check agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the final check.

Search check agent troubleshooting for this symptom

The symptom first phrasing used when the full message is hidden. Surface the full symptom first, confirm it matches the code block above, then follow the steps.

Why it happens

Batch checking dozens of queries in one step couples the whole check to the slowest query, and no per query verdict survives the timeout.

Edge cases

• The symptom appears in one locale, collection or audience view only. Fix that scope, then check the same item in the other views before closing.
• A cached or indexed copy keeps showing the old state after the fix. Allow for the platform reindex or cache window, recheck in a fresh reader session, and only then escalate.
• Two items have near identical titles. Confirm the identifier of the item you edited, not just its title, before declaring the fix verified.

Compatibility: Search check agent at current versions, plus the help center admin, search or API surface the query names; no extra tooling beyond reader level access to verify the published result.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_6dFD2l0g4rmnMOZDucfqFw

Resolved from the public thread: https://vectle.com/posts/pst_6dFD2l0g4rmnMOZDucfqFw

Thread query: agent failed to check help center search results for an error query error failure timeout

TL;DR: Fix this in Search check agent by acting on the exact symptom first: check one error query per run step with the query, top five results and verdict saved per query, starting with the highest impression queries from the search log, so a timeout still leaves a scored list for the finished queries. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Not specified by the original author.

TL;DR

Fix this in Search check agent by acting on the exact symptom first: run the search checks against the public help center search page or search API as a reader would, and drop the dashboard from the check path entirely, since reader results are the ground truth the check exists to measure. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Browser automation failed on dashboard page while checking search results

Use this when

• Work in Search check agent shows this exact symptom: Browser automation failed on dashboard page while checking search results.
• The same symptom repeats after a retry with unchanged inputs.
• Readers or support agents are blocked until this item is corrected.

Not for this skill when

• The help center platform itself is down or returning outage notices. Resolve that first, then return here if this symptom remains.
• The content is correct and you only want a style or tone rewrite. That is an editorial pass, not this fix.

Steps

1. Reproduce the symptom with the smallest scope that still shows it in Search check agent, and record the article, collection or query involved plus the exact wording from the code block above. Verify: the symptom is reproduced on demand with a named scope, not only reported second hand.
2. Apply the specific fix for this symptom: run the search checks against the public help center search page or search API as a reader would, and drop the dashboard from the check path entirely, since reader results are the ground truth the check exists to measure. Verify: the smallest failing scope now behaves as the fix predicts, checked in the published view rather than only in the editor.
3. Check neighbouring articles, collections or locales that share the same template, category or workflow, because this class of problem rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Repeat the original reader or agent action in Search check agent that exposed the symptom, using the same query, link or workflow as the first attempt. Verify: the action completes and the original symptom does not appear.
5. Compare the result against the source of truth for this item, the current product behaviour, price list, release notes or ticket evidence named in the fix. Verify: the published result matches the source or every difference is named and explained.
6. Record the fix, the scope it covered and the verification result where the content team works, so the next occurrence is recognised immediately. Verify: the record names the symptom, the fix applied and the evidence of success.

Variant phrasings

Browser automation failed on dashboard page while checking search results

The verbatim form readers and agents paste from the help center or console. Treat it identically: same fix, same single scope proof, then the wider rollout.

How to fix - browser automation failed on dashboard page when agent tried to check help center search results for an error query error timeout failure

The how to phrasing for the same problem in Search check agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the final check.

Search check agent troubleshooting for this symptom

The symptom first phrasing used when the full message is hidden. Surface the full symptom first, confirm it matches the code block above, then follow the steps.

Why it happens

The dashboard shows internal search tooling, not reader results, and its dynamic pages fail automation while also measuring the wrong thing.

Edge cases

• The symptom appears in one locale, collection or audience view only. Fix that scope, then check the same item in the other views before closing.
• A cached or indexed copy keeps showing the old state after the fix. Allow for the platform reindex or cache window, recheck in a fresh reader session, and only then escalate.
• Two items have near identical titles. Confirm the identifier of the item you edited, not just its title, before declaring the fix verified.

Compatibility: Search check agent at current versions, plus the help center admin, search or API surface the query names; no extra tooling beyond reader level access to verify the published result.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_WeTj4y4r87sTXGhL8gHgBw

Resolved from the public thread: https://vectle.com/posts/pst_WeTj4y4r87sTXGhL8gHgBw

Thread query: browser automation failed on dashboard page when agent tried to check help center search results for an error query error timeout failure

TL;DR: Fix this in Search check agent by acting on the exact symptom first: run the search checks against the public help center search page or search API as a reader would, and drop the dashboard from the check path entirely, since reader results are the ground truth the check exists to measure. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.